• Journal of the Korean Ceramic Society
• /
• v.38 no.7
• /
• pp.643-647
• /
• 2001

퓨란수지로부터 유리질 탄소를 제조하였다. 유리질 탄소의 제조시, 사용된 수지가 경화 및 탄화 단계에서 많은 양의 가스를 방출하면서 큰 수축이 발생하여 크랙을 형성하고 휨 현상을 일으킨다. 이런 현상을 감소시키기 위하여 본 실험에서는 경화단계에서 압력을 가하고, 가열속도를 매우 느리게 하였다. 또한, 경화단계에서 무게감소와 수축율을 억제하고, 발생하는 가스의 배출을 용이하게 하여 궁극적으로는 시편의 크랙 및 휨 현상을 방지하고자 필러와 알콜을 첨가하였다. 그 결과, 무게감소와 수축을 억제하고 밀도의 증가를 가져왔고 유리질 탄소를 용이하게 제조할 수 있었으나 알코올을 첨가한 경우 필러의 양이 증가할수록 높은 비저항 값과 낮은 강도값을 나타내었다. 이런 현상은 알코올이 경화단계에서 분해 증발하면서 미세한 기포를 형성하고 이것들이 기공으로 전이하여 최종 제품에까지 영향을 주었기 때문이다.

• Journal of Institute of Convergence Technology
• /
• v.3 no.1
• /
• pp.45-49
• /
• 2013

Spherical active carbon materials have been used for the removal of pollutants in the area of food processing, water treatment, air purification, oral administration. Moreover, they are now expected to make an epoch in the areas of electronics, life science, environmental technology, and so on due to their superior physical properties. Carbon particles should be requested for the edgeless spherical shapes in order to minimize the loss due to the abrasion during the process and/or practical use, but the carbon particles manufactured from petroleum-based pitch do not meet these needs. Nowadays, thus, the spherical active carbon particles carbonized from various spherical polymer beads are studied with thermoplastic and/or thermosetting polymers. In this paper, the synthesis of spherical phenolic beads and furan beads, which are thermosetting polymers, and their carbonization techniques are examined.

• Journal of the Korean Ceramic Society
• /
• v.34 no.11
• /
• pp.1151-1158
• /
• 1997

Fracture of uni-directional carbon fiber reinforced carbon matrix composite is strongly dependent on the orientation of basal plane in graphite matrix when it is limited within matrix. The orientation of basal planes are vertically stacked to carbon fiber which results in the weakness for applied tensile or shear force in thermosetting resin derived-carbon matrix composite. Microtextural control of the matrix was tried through chemical interaction between metal carbides and furan resin derived-carbon matrix. SiC and TiO2 addition made the orientation disordered. However, porosity increased due to decomposition of SiC. Interfacial bonding could be controlled by TiO2 addition, but carbon fiber was considerably reacted with TiC during thermal treatment higher than 2$600^{\circ}C$. Therefore, it is desirable to control the thermal treatment temperature at which decomposition of SiC was not serious and TiC/C was not formed eutectoid.

• Archives of Pharmacal Research
• /
• v.21 no.2
• /
• pp.164-167
• /
• 1998

Bis-${\gamma}$-lactones (1,2) having a perhydrofuro[3,4-c]furan-1,4-dione skeleton were designed as conformationally constrained diacylglycerol analogues. They were synthesized from D-apiose in 11 steps, and evaluated as $PKC-{\alpha}$ ligands by measuring their ability to displace bound $^3H$]PDBU from the enzyme. The compounds showed moderate binding affinities with $K_i$ values of 13.89 (${\pm}5.67$) ${\mu}M$ and 11.47 (${\pm}0.89$) ${\mu}M$, respectively. Their similar binding affinities indicate that these two bicyclic compounds were not effectively discriminated by $PKC-{\alpha}$ in terms of the direction of the side chain as other ligands built on similar bis-${\gamma}$-lactones.

• Bulletin of the Korean Chemical Society
• /
• v.33 no.1
• /
• pp.233-242
• /
• 2012

A new synthetic method for dimethyl 2,3-dihydrobenzo[b]oxepine-2,4-dicarboxylates and methyl 2-(2-carbomethoxybenzo[b]furan-3-yl)propanoates by an intramolecular conjugate displacement reaction or an $S_N2$ reaction of acetates of Morita-Baylis-Hillman adducts of methyl (2-formylphenoxy)acetates has been described.

• Bulletin of the Korean Chemical Society
• /
• v.33 no.1
• /
• pp.305-308
• /
• 2012

• Bulletin of the Korean Chemical Society
• /
• v.34 no.4
• /
• pp.1023-1024
• /
• 2013

• YAKHAK HOEJI
• /
• v.35 no.6
• /
• pp.483-485
• /
• 1991

A furanquinone substance(methyl 5-hydroxy-dinaphtho [1,2-2',3'] furan-7,12-dione-6-carboxylate) which has been isolated from the methanol extract of Paulownia tomentosa stem was synthesized by condensing 2,3-dichloro-1,4-naphthoquinone with methyl 1,4-dihydroxy-naphthalene-2-carboxylate in pyridine and identified by NMR, MS, UV, IR etc.

• Journal of the Korean Wood Science and Technology
• /
• v.10 no.4
• /
• pp.38-52
• /
• 1982

The effect of propylene oxide, butylene oxide, furan resin, and vinylpyrrolidinone in controlling wood dimensional stability have been examined. Wood in the green or ovendry condition was treated with various chemical treatments using a vacuum-pressure procedure, and treated specimens were tested for tangential sweelling, moisture gain, and changes in sorption hysteresis. Results' indicate that propylene oxide, and butylene oxide enhanced with the crosslin king agent trimethylol propane trimethacrylate and applied to ovendry wood were the most efficient chemical treatments in controlling tangential sweeling caused by liquid water or water vapor, and in reducing water vapor adsorption. The sorption behavior of treated wood as depicted by the ratios of sorption was "very favorable" in most instances. In the particular case of furan resin treatments, ratios of sorption were improved from 25 to 100 percent as compared to those of untreated wood.

• Journal of the Korean Chemical Society
• /
• v.43 no.5
• /
• pp.11-606
• /
• 1999