• 한국의류학회지
• /
• 제45권2호
• /
• pp.390-407
• /
• 2021

The study aims to assess the current status of sustainable clothing habits from the perspective of consumers. Awareness and management behavior regarding microplastics from fashion products and usage of fleece and faux fur were investigated. A random online survey involving 413 women was conducted to figure out their perceptions on microplastics that are shedded from fashion products such as fleece and faux fur. The results indicate that 73.6% were not aware of the fact that microplastic is released during the washing process of fleece and faux fur. Furthermore, only 26.6% of the respondents who were aware of microplastics from clothing washing were making efforts to reduce its emission. The respondents considered product sustainability more in the selection stage than in the management stage (p<.001). The results revealed that, although the respondents were highly aware of the risk of environmental pollution that microplastics pose, they were neither fully cognizant of the fact that microplastics may come from fashion products, nor did they make efforts to reduce its emissions. Compared with respondents in their 20's, respondents in the age of 30-40 years seemed more aware of microplastics from fashion products and exerted more effort to reduce its emission.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 1998년도 제14회 학술발표회 논문개요집
• /
• pp.17-17
• /
• 1998

Synchrotron radiation is produced when charged particles moving with relativistic velocities a are accelerated - for example, deflected by the bending magnets which guide the electron or p positrons in circular accelerators or storage rings. By using special focusing magnetic lattices i in the particle accelerators it is possible to make the dimensions of the particle beam very small with a hi맹 charge density which results in a light source with high b디lIiance. Synchrotron light h has important properties which make it ideal for a wide range of investigations in surface s science. The fact that the spectrum of electromagnetic radiation emitted in a bending magnet e extends in a continuum from the 얹r infra red region to hard x-rays means that it is id않I for a v variety of spectroscopic studies. Since there are no convenient lasers, or other really bright l light sources, in the vacuum ultraviolet and soft x-ray re.밍ons the development of synchrotron r radiation has enabled enormous advances to be made in this di펌C비t spectr따 re밍on. P Polarization-dependent measurements, for ex없nple ellipsometry or circular dichroism studies a are possible because the radiation has a well-defined polarization - linear in the plane of orbit w with additional right-circular, or left-circular, components for emission an생es above, or below, t the horizontal, respectively. Since the synchrotron light is emitted from a bunch of charge c circulating in a ring the light is emitted with a well-defined time structure with a short flash of l light every time a bunch passes an exit port. The time structure depends on the size of the ring a and the number and sequence of filling of the bunches. A pulsed light source enables time¬r resolved studies to be performed which provide direct information on the lifetimes and decay m modes of excited states and in addition opens up the possibility of using time of flight t techniques for spectroscopic studies. The fact that synchrotron radiation is produced in a clean u ultrahi야 vacuum environment is of gr않t importance for surce science studies. The current t비rd generation synchrotron light sources provide exceptionally high baliance and stability a and open up possibilities for experiments which would have been inconceivable only a short time ago.

• Safety and Health at Work
• /
• 제13권4호
• /
• pp.429-439
• /
• 2022

Background: The risk observatory (RO) of the German Social Accident Insurance (DGUV) provides strategic support to the German Social Accident Insurance Institutions (GSAII) in proactive prevention. It does so by identifying future challenges and opportunities for occupational safety and health (OSH) resulting from new trends and developments that affect employees as well as children in elementary education, pupils, and students. Methods: The core of the RO is an online survey that relies on a pool of new trends and developments identified via internet and literature research. 865 prevention experts of the GSAII and the DGUV participated in the survey. They rated trends and developments regarding their sector-specific risks and opportunities for OSH in the 5 years to come. Results: Sector-specific and over-all results show that besides well-known OSH risks such as musculoskeletal stress and noise, developments relevant for OSH come to the fore that do not have their origin in work itself, but are strongly influenced by political, social, economic, environmental, or technical developments that accident insurance can only peripherally influence. Shortage of skilled staff was identified as a threat to OSH in almost all sectors. Conclusions: Prevention must find ways to address repercussions of such OSH risks. Cooperation and political awareness are therefore gaining in importance. Also, implementing a prevention culture in society and strengthening individuals' health and safety literacy, e.g., by target-group-specific communication and sensitization, as well as early safety and health education, help to counteract those OSH risks.

• 한국정밀공학회지
• /
• 제22권12호
• /
• pp.34-41
• /
• 2005

There is a strong demand fur the contactless transportation device fur a hard disk and silicon wafer without contaminating and damaging them. To fulfill this requirements, A transportation device fur them has been proposed. But the device needs many of costly displacement sensors positioned along the transportation interval and possesses a very complicated controller and driving scheme. To overcome those kinds of drawback, in this paper, we present a very simple and cost-effective transportation device which only consists of a linear guide, very simple electrostatic suspension system and driving circuit of stepping motor. The principle of stable suspension by relay feedback control, derivation of lateral restoring force, the design of transportation system are described, fellowed by the experimental system. Experimental results show that a 3.5-inch hard disk has been transported with a speed of approximately 20mm/s while being suspended stably at a gap of 0.25mm.

• The Korean Journal of Ceramics
• /
• 제7권1호
• /
• pp.11-15
• /
• 2001

A thermodynamic assessment for the ZrO$_2$-TiO$_2$ system has been conducted. An optimal thermodynamic data set for this system is evaluated by the CALPHAD(CALculation of PHAse Diagram) method applied to experimental phase diagram and thermodynamic data. The liquid is described by ionic liquid model with two sublattices. The solubilities of the solid phases, tetragonal ZrO$_2$ and TiO$_2$(rutile), were described by subregular substitutional model with one sublattice. Two compounds, ZrTiO$_4$ and ZrTi$_2$O$_6$, are modeled as stoichiometric compounds.

• 대한수학회지
• /
• 제52권1호
• /
• pp.1-21
• /
• 2015

C-domains are defined via class semigroups, and every C-domain is a Mori domain with nonzero conductor whose complete integral closure is a Krull domain with finite class group. In order to extend the concept of C-domains to rings with zero divisors, we study v-Marot rings as generalizations of ordinary Marot rings and investigate their theory of regular divisorial ideals. Based on this we establish a generalization of a result well-known for integral domains. Let R be a v-Marot Mori ring, $\hat{R}$ its complete integral closure, and suppose that the conductor f = (R : $\hat{R}$) is regular. If the residue class ring R/f and the class group C($\hat{R}$) are both finite, then R is a C-ring. Moreover, we study both v-Marot rings and C-rings under various ring extensions.

• International Journal of Precision Engineering and Manufacturing
• /
• 제3권3호
• /
• pp.12-20
• /
• 2002

As numerous sensors and actuators are used in many automated systems, various industrial networks are adopted for real-time distributed control. In order to take advantages of the networking, however, the network implementation should be carefully designed to satisfy real-time requirements considering network induced delays. This paper presents an implementation scheme of a networked control system via Profibus-DP network fur real-time distributed control. More specifically, the effect of the network induced delay on the control performance is evaluated on a Profibus-DP testbed. Also, two conventional PID gain tuning methods are slightly modified fur fouling controllers fur the networked control system. With appropriate choices for gains, it is shown that the networked control system can perform almost as well as the traditional control system.

• 한국음향학회지
• /
• 제17권2호
• /
• pp.79-83
• /
• 1998

높은 온도에서 금속물질이 응고되는 동안에 물질의 구조는 결정성장속도비율에 따 라 크게 좌우된다. 유도초음파를 기초로 한 펄스-에코 초음파실험기술과 함께 고체-액체 경 계면의 위치와 속도를 실시간으로 측정할 수 있어 고체화되는 동안의 용광로 파라메터들을 조절하는데 사용될 수 있다. 실험은 Bridgman형의 용광로에서 CuMn-막대시료에 대하여 서로 다른 냉각비율로 수행되었다. 열적평형상태에서 경계면의 위치에 대한 측정분해능은 약10㎛이다.

• BMB Reports
• /
• 제36권6호
• /
• pp.608-610
• /
• 2003

Escherichia coli has two catalases, HPI and HPII. HPI is induced during logarithmic growth in response to low concentrations of hydrogen peroxide. This induction is OxyR-dependent. On the other hand, HPII is not peroxide-inducible but is induced in entry to the stationary phase. We demonstrate here that E. coli displayed higher HPI catalase activity when compared to the cultures that were grown in a normal medium, if grown in a medium supplemented with iron-citrate. Iron supplementation had no effect on HPII catalase. This increase of HPI activity was OxyR-independent and not observed in a ${\Delta}fur$ mutant. The physiological significance of the increase of HPI activity is unclear, but it appears that the katG gene that codes for HPI catalase is among the genes that are regulated by Fur.

• 복식
• /
• 제61권6호
• /
• pp.74-85
• /
• 2011

In modern fashion, accessories are recognized as indispensable articles for the completion of a look. Scarf and muffler has attained significance as a main fashion item. The purpose of study was to analyze the motifs of special material for muffler design on special material, and to seek unique and decorative effect using three dimensional method on the flat surfaced textile to give novelty. This study introduced technique of applying embroidery onto special materials such as fur and leather to achieve variety of texture effect. The results are as follows: Six designs were proposed. Each work has different detail and silhouette, and the unique motif design using embroidery with cotton, nylon, and bead on fur, leather, wool, and satin. This will be a method to develop value-added products in fashion and formative arts.