• 비파괴검사학회지
• /
• 제26권2호
• /
• pp.77-83
• /
• 2006

초음파 비선형성은 적층 구조물 내부의 미세크랙이나 계면 들뜸을 검출하기 위한 수단으로 주목받고 있다. 비선형 초음파의 특징적인 현상은 전파 과정중에 고조파가 발생되는 것이다. 그러므로 비선형성의 정량화를 위해서는 수신된 초음파 신호에 포함된 고조파 성분의 검출이 중요하며, 일반적으로 2차 조화 성분과 기본 주파수 성분의 진폭비가 비선형 파라미터로 이용되고 있다. 그러나 이 비선형 파라미터를 정확하게 추정할 수 있는 방법이 확립되어 있지 않기 때문에 현재까지는 현장적용에 어려움을 겪고 있다. 본 연구에서는 초음파 비선형 파라미터의 정밀 추정을 위한 신호 처리 기술을 제안하고자 한다 이 기술은 파워 스펙트럼과 바이스펙트럼 분석에 기초하며, 특히 본 연구에서는 초음파 현미경(SAM, scanning acoustic microscope)에 사용되는 펄스형 신호로부터 고조파를 검출하는데 주목하였다. 제안된 기법의 유효성은 틈새의 크기가 접촉 중심에서 반경 방향으로 일정하게 증가하는 뉴턴링(Newton-ring)과 칩의 윗면에 국부적인 들뜸을 가진 반도체 샘플에 대한 실험을 통해 검증되었다. 결과적으로 제안된 신호처리기법에 의해 획득된 비선형 파라미터는 계면 들뜸과 좋은 상관성을 보였다.

• BMB Reports
• /
• 제40권2호
• /
• pp.270-276
• /
• 2007

We have cloned a novel mouse zinc finger protein gene Znf313 by rapid amplification of cDNA ends (RACE) according to the homologue of human ZNF313 gene. The cDNA is 2,163 base pairs (bp) in length and encodes a 229 amino acids (aa) protein with a $C_3HC_4$ ring finger domain and three $C_2H_2$ domains. 89% and 93% nucleotide (nt) and aa sequence identity is observed with its human homologue. Revealed by Northern blot and RT-PCR, full mRNA consists of 2.16 kb and widely expresses in tissues as a single transcript, most abundantly in heart, liver, kidney and testis. The expression of Znf313 in testis is detected in all development stages. Western blot analysis also reveals that Znf313 is expressed in the tissues. Immunohistochemical staining and subcellular localization demonstrate that Znf313 is expressed both in the cytoplasm and nucleus whereas predominantly localized in the nucleus. Present data suggests that Znf313 gene might play a fundamental role in gene transcription and regulation in organism and relates to spermatogenesis.

• 대한수학회보
• /
• 제22권2호
• /
• pp.121-126
• /
• 1985

D.K. Harrison [5] has shown that if R and S are fields of characteristic different from 2, then two Witt rings W(R) and W(S) are isomorphic if and only if W(R)/I(R)$^{3}$ and W(S)/I(S)$^{3}$ are isomorphic where I(R) and I(S) denote the fundamental ideals of W(R) and W(S) respectively. In [1], J.K. Arason and A. Pfister proved a corresponding result when the characteristics of R and S are 2, and, in [9], K.I. Mandelberg proved the result when R and S are commutative semi-local rings having 2 a unit. In this paper, we prove the result when R and S are 2-fold full rings. Throughout this paper, unless otherwise specified, we assume that R is a commutative ring having 2 a unit. A quadratic space (V, B, .phi.) over R is a finitely generated projective R-module V with a symmetric bilinear mapping B: V*V.rarw.R which is nondegenerate (i.e., the natural mapping V.rarw.Ho $m_{R}$ (V, R) induced by B is an isomorphism), and with a quadratic mapping .phi.:V.rarw.R such that B(x,y)=(.phi.(x+y)-.phi.(x)-.phi.(y))/2 and .phi.(rx)= $r^{2}$.phi.(x) for all x, y in V and r in R. We denote the group of multiplicative units of R by U(R). If (V, B, .phi.) is a free rank n quadratic space over R with an orthogonal basis { $x_{1}$, .., $x_{n}$}, we will write < $a_{1}$,.., $a_{n}$> for (V, B, .phi.) where the $a_{i}$=.phi.( $x_{i}$) are in U(R), and denote the space by the table [ $a_{ij}$ ] where $a_{ij}$ =B( $x_{i}$, $x_{j}$). In the case n=2 and B( $x_{1}$, $x_{2}$)=1/2, we reserve the notation [ $a_{11}$, $a_{22}$] for the space.the space.e.e.e.

• Structural Engineering and Mechanics
• /
• 제56권4호
• /
• pp.667-694
• /
• 2015

The suspended dome system is a new structural form that has become popular in the construction of long-span roof structures. Suspended dome is a kind of new pre-stressed space grid structure that has complex mechanical characteristics. In this paper, an optimum topology design algorithm is performed using the enhanced colliding bodies optimization (ECBO) method. The length of the strut, the cable initial strain, the cross-sectional area of the cables and the cross-sectional size of steel elements are adopted as design variables and the minimum volume of each dome is taken as the objective function. The topology optimization on lamella dome is performed by considering the type of the joint connections to determine the optimum number of rings, the optimum number of joints in each ring, the optimum height of crown and tubular sections of these domes. A simple procedure is provided to determine the configuration of the dome. This procedure includes calculating the joint coordinates and steel elements and cables constructions. The design constraints are implemented according to the provision of LRFD-AISC (Load and Resistance Factor Design-American Institute of Steel Constitution). This paper explores the efficiency of lamella dome with pin-joint and rigid-joint connections and compares them to investigate the performance of these domes under wind (according to the ASCE 7-05), dead and snow loading conditions. Then, a suspended dome with pin-joint single-layer reticulated shell and a suspended dome with rigid-joint single-layer reticulated shell are discussed. Optimization is performed via ECBO algorithm to demonstrate the effectiveness and robustness of the ECBO in creating optimal design for suspended domes.

• Journal of the Korean Wood Science and Technology
• /
• 제43권6호
• /
• pp.721-729
• /
• 2015

목재의 재질특성은 토양, 기후, 임분특성 등의 환경적 요인뿐만 아니라 인위적인 처리에 의해서도 바뀌게 되므로 남부지역의 전라남도 완도 수목원에서 무간벌, 약도간벌, 강도간벌의 간벌강도에 따른 목재의 조직 물리 역학적 특성을 평가 분석한 결과 간벌 강도에 따라 여러 조건에서 높은 상관관계를 나타내었다. 특히 간벌강도는 연륜폭과 역학적 특성에서 밀접한 상관관계를 나타내었다. 본 연구결과 붉가시나무의 간벌강도와 재질특성 사이에서 상관관계가 나타났고 이러한 결과는 목재를 시업체계와 육림방법 시스템에 적용할 수 있는 기초자료로서 활용가치가 높을 것으로 판단된다.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2007년도 Proceedings of ISRS 2007
• /
• pp.449-451
• /
• 2007

In the commercially managed timber lands, the information such as height, age, stand density, canopy closure and leaf area index need to be collected periodically. Stand volume is the most fundamental information in the valuation of timber, however, stand age information is the primary element of forest inventory and these two are highly correlated. Conventional method of collecting stand age information by field surveys such as ring count method is accurate; however, it is expensive, labor-intensive and time consuming. In the present study it was aimed to collect stand age information using modem techniques in a commercially managed timberland situated in Tennessee, USA. The Landsat Thematic Mapper (TM), Enhanced Thematic Mapper (ETM+) of three different periods, Shuttle Radar Topography Mission (SRTM), National elevation dataset (NED) and field inventory data were used. Normalized difference vegetation index (NDVI) and Tasselled Cap (TC) transformation techniques were applied on the TM and ETM+ data. The regression analysis was carried out to identify the correlation between stand age and NDVI, TC. In the present study about 2,469 datasets were analyzed. The $R^{2}$ value for stand age estimation was 0.713. The NDVI, TC2 and TC3 were found to produce accurate timber age information.

• 한국환경과학회지
• /
• 제19권6호
• /
• pp.747-753
• /
• 2010

It follows in quality and sewage exclusion method of the investigation objective sector and the Combined Sewer Overflows which is suitable in regional characteristics and the confluence area against the rainfall initially a flow and the medulla and measurement - it analyzes the initial rainfall outflow possibility control plan which is suitable in the domestic actual condition and it proposes the monitor ring plan for the long-term flow and pollution load data accumulation. From the research which it sees the Infiltration water/Influent water and CSOs investigation it passes by the phase of hazard chain and Namwon right time 4 it does not hold reverse under selecting, Measurement it used the hazard automatic flow joint seal Sigma 910 machine and in case 15 minute interval of the I/I, it measured a flow at case 5, 15 minute standing of the CSOs. The water quality investigation for the water leakage investigation of the I/I and the sewage from the point which is identical with flow measurement during on-the-spot inspection duration against 6 items which include the BOD sampling and an analysis, when the rainfall analysis for CSOs fundamental investigation analyzed against 18 items which include the BOD sampling. Consequently, for the optimum interpretation invasion water / inflow water of the this investigation area day average the lowest flow - water quality assessment veterinarian optimum interpretation hazard average per day - lowest flow - it averages a medulla evaluation law department one lowest flow evaluation technique and it selects, it presentation collectively from here it gets, position result with base flow analysis of invasion water / inflow water.

• Journal of Astronomy and Space Sciences
• /
• 제39권4호
• /
• pp.159-167
• /
• 2022

Because of the small number of spacecraft available in the Earth's magnetosphere at any given time, it is not possible to obtain direct measurements of the fundamental quantities, such as the magnetic field and plasma density, with a spatial coverage necessary for studying, global magnetospheric phenomena. In such cases, empirical as well as physics-based models are proven to be extremely valuable. This requires not only having high fidelity and high accuracy models, but also knowing the weakness and strength of such models. In this study, we assess the accuracy of the widely used Tsyganenko magnetic field models, T96, T01, and T04, by comparing the calculated magnetic field with the ones measured in-situ by the GOES satellites during geomagnetically disturbed times. We first set the baseline accuracy of the models from a data-model comparison during the intervals of geomagnetically quiet times. During quiet times, we find that all three models exhibit a systematic error of about 10% in the magnetic field magnitude, while the error in the field vector direction is on average less than 1%. We then assess the model accuracy by a data-model comparison during twelve geomagnetic storm events. We find that the errors in both the magnitude and the direction are well maintained at the quiet-time level throughout the storm phase, except during the main phase of the storms in which the largest error can reach 15% on average, and exceed well over 70% in the worst case. Interestingly, the largest error occurs not at the Dst minimum but 2-3 hours before the minimum. Finally, the T96 model has consistently underperformed compared to the other models, likely due to the lack of computation for the effects of ring current. However, the T96 and T01 models are accurate enough for most of the time except for highly disturbed periods.

• 대한본초학회지
• /
• 제33권3호
• /
• pp.11-18
• /
• 2018

Objectives : Saururus chinensis and Houttuynia cordata (Saururaceae) are perennial herbs using for medicinal purposes in Korea. The objectives of this study are to compare anatomical key characters between two medicinal plants and to provide fundamental information for the identification of two herbal medicines by using anatomical features. Methods : Cross-sections of root, rhizome, stem, petiole, and leaf for each species were observed in this study. Materials were analyzed through dehydration, paraffin embedding and micro-sectioning, and double staining with Safranin O and Fast-Green FCF. Observations of permanent preparation were conducted using light microscope. Results : S. chinensis and H. cordata were distinguished with anatomical differentiations; Idioblasts with essential oil were scattered in the parenchyma cell of cortex, pith, and phloem of S. chinensis, on the other hand, in H. cordata, idioblasts were distributed ring-shaped in the cortex of the root. S. chinensis had two cycles of vascular bundles in the stem while H. cordata had one cycle. Hypodermis layer was conspicuous in a stem of H. cordata, crystals were observed the only parenchyma in a stem of S. chinensis, and epidermal oil cells were developed in the epidermis of H. cordata. S. chinensis had air cavity at the cortex and pith of the stem. The shape of cross-section was polygonal in the stem of S. chinensis and was circular in the stem of H. cordata. Conclusions : We investigated anatomical study of Korean S. chinensis and H. cordata. To identify two herbal medicines, we considered main anatomical features and provided identification key here.

• Journal of the Korean Wood Science and Technology
• /
• 제36권6호
• /
• pp.23-32
• /
• 2008

국내산 목재의 신용도개발을 위한 기초연구로서, 국내에서 생장한 밤나무 7품종(단택, 이취, 이평, 만성, 은기, 유마, 축파)의 목재의 해부 및 물리적 특성을 조사하였다. 밤나무재의 관공은 환공성 문양공재 형태였고 주로 고립관공이 관찰되었다. 방사유세포는 평복, 직립, 방형이 모두 존재하였으나 주로 평복세포였다. 방사조직은 단열, 복열, 다열의 형태가 모두 관찰되었으나 수심부에서는 거의 단열방사조직이었고 수피부에서는 복열이나 다열방사조직의 출현빈도가 높았다. 수심부는 수피부보다 도관직경이 작았고, 단위면적 당 도관의 분포수가 많았으며 방사조직의 수가 적고 방사조직의 세포고가 높았다. 복열 및 다열방사조직의 출현비율은 단택, 이취, 만성, 축파에서 높은 반면, 유마, 은기, 이평에서 낮았다. 연륜폭은 수심부가 수피부에 비해 비교적 더 넓었고, 수심부 연륜폭은 만성과 유마가, 수피부 연륜폭은 이취가 넓었다. 만재율은 수심부와 수피부 간에 큰 차이가 없었으나 대체적으로 수피부가 다소 높았고, 품종 중에서는 만성과 축파가 높았다. 생재함수율은 모든 품종에서 심재부가 변재부보다 다소 높게 나타났다. 밀도는 심재부와 변재부, 품종에 따른 큰 차이는 없었으나 대체적으로 심재가 변재보다 높게 나타났으며 특히 이평과 이취의 밀도가 컸다.