• Korean Journal of Mineralogy and Petrology
• /
• v.34 no.2
• /
• pp.121-131
• /
• 2021

Magnesium (Mg) present in carbonate minerals as impurities has been used as a geochemical proxy to infer the environmental conditions where the minerals precipitated. The reliability of Mg geochemical proxies requires fundamental understanding of Mg incorporation into minerals based on accurate speciation of Mg ²⁺ in the crystal structure, which is determined mainly by application of X-ray absorption spectroscopy (XAS). However, high uncertainties are involved in interpreting the XAS spectra of minerals containing trace amount of Mg ²⁺. Because density function theory (DFT) can predict an XAS spectrum for a crystal structure, DFT calculations can reduce the uncertainties in the interpretation of the XAS spectrum. In this study, we calculated ab initio Mg K-edge absorption spectra of Mg silicates and (hydr)oxides based on DFT and analyzed the correlation between the calculated spectra and Mg structural parameters. Our ab initio Mg K-edge absorption spectra well reproduced the key features of the experimental spectra. The absorption-edge positions of the calculated spectra showed the weak positive correlation with the average Mg-O bond distance or Mg effective coordination number. The current study shows that DFT-based core-level spectroscopy method is a powerful tool in providing standard Mg K-edge spectra of diverse Mg minerals and determining the Mg chemical species within carbonate minerals.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.2
• /
• pp.7-13
• /
• 2019

This study aims to develop a FE Model to simulate dissimilar friction stir welding and to address its potential for fundamental analysis and practical applications. The FE model is based on Coupled Eulerian-Lagrangian approach. Multiphysics systems are calculated using explicit time integration algorithm, and heat generations by friction and inelastic heat conversion as well as heat transfer through the bottom surface are included. Using the developed model, friction stir welding between an Al6061T6 plate and an AZ61 plate were simulated. Three simulations are carried out varying the welding parameters. The model is capable of predicting the temperature and plastic strain fields and the distribution of void. The simulation results showed that temperature was generally greater in Mg plates and that, as a rotation speed increase, not the maximum temperature of Mg plate increased, but did the temperature of Al plate. In addition, the model could predict flash defects, however, the prediction of void near the welding tool was not satisfactory. Since the model includes the complex physics closely occurring during FSW, the model possibly analyze a lot of phenomena hard to discovered by experiments. However, practical applications may be limited due to huge simulation time.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.24 no.2
• /
• pp.282-297
• /
• 2019

Detection of mesoscale oceanic eddies using satellite data can utilize various ocean parameters such as sea surface temperature (SST), chlorophyll-a pigment concentration in phytoplankton, and sea level altimetry measurements. Observation methods vary for each satellite dataset, as it is obtained using different temporal and spatial resolution, and optimized data processing. Different detection results can be derived for the same oceanic eddies; therefore, fundamental research on eddy detection using satellite data is required. In this study, we used ocean color satellite data, sea level altimetry data, and infrared SST data to detect mesoscale eddies in the East Sea and compared results from different detection methods. The sea surface current field derived from the consecutive ocean color chlorophyll-a concentration images using the maximum cross correlation coefficient and the geostrophic current field obtained from the sea level altimetry data were used to detect the mesoscale eddies in the East Sea. In order to compare the eddy detection from satellite data, the results were divided into three cases as follows: 1) the eddy was detected in both the ocean color and altimeter images simultaneously; 2) the eddy was detected from ocean color and SST images, but no eddy was detected in the altimeter data; 3) the eddy was not detected in ocean color image, while the altimeter data detected the eddy. Through these three cases, we described the difficulties with satellite altimetry data and the limitations of ocean color and infrared SST data for eddy detection. It was also emphasized that study on eddy detection and related research required an in-depth understanding of the mesoscale oceanic phenomenon and the principles of satellite observation.

• Journal of Ginseng Research
• /
• v.43 no.2
• /
• pp.242-251
• /
• 2019

Background: Korean Red Ginseng has been widely used in traditional oriental medicine for a prolonged period, and its pharmacological effects have been extensively investigated. In addition, Angelica gigas and deer antlers were also used as a tonic medicine with Korean Red Ginseng as the oriental herbal therapy. Methods: This study was conducted to evaluate the potential toxicological effect of KGC-HJ3, Korean Red Ginseng with angelica gigas and deer antlers, on reproductive and developmental functions including fertility, early embryonic development, maternal function, and embryo-fetal development. KGC-HJ3 was administered by oral gavage to Sprague-Dawley rats (22 animals per sex per group) at dose levels of 0 mg/kg (control), 500 mg/kg, 1000 mg/kg, and 2000 mg/kg to evaluate the potential toxicological effect on fertility and early embryonic development. In addition, KGC-HJ3 was also administered by oral gavage to mating-proven Sprague-Dawley rats (22 females per group) during the major organogenesis period at dose levels of 0 mg/kg (control), 500 mg/kg, 1000 mg/kg, and 2000 mg/kg to evaluate the potential toxicological effect on maternal function and embryo-fetal development. Results and conclusion: No test item-related changes in parameters for fertility, early embryonic development, maternal function, and embryo-fetal development were observed during the study period. On the basis of these results, it was concluded that KGC-HJ3 did not have toxicological potential on developmental and reproductive functions. Therefore, no observed adverse effect levels of KGC-HJ3 for fertility, early embryonic development, maternal function, and embryo-fetal development is considered to be at least 2000 mg/kg/day.

• Journal of the Korean GEO-environmental Society
• /
• v.12 no.9
• /
• pp.71-78
• /
• 2011

Cement treating technique, such as deep mixing method, has been used widely to stabilize the dredged clayey soil for many years. Despite of its effectiveness in treating soil by cement, several efforts have also been made to try to reduce the side effect of the cement that used to stabilize the dredged clay. However, authors considered that more detailed study on the physical and mechanical properties of lean-mixed soil-cement has been required to establish the design procedure to apply the practical problems. Therefore, in this study, the curing time and mixing ratio was used as key parameters to estimate the physical and mechanical properties including long-term behavior. The unconfined strength of lean-mixed soil-cement increase continuously during curing period, 270 days, while increasing rate becomes low in ordinary cement-treated dredged clay. We also concluded that cement-treated dredging clay shows apparent quasi overconsolidation behavior even in low cement proportion. By this study, fundamental approach was carried out for effective reuse of very soft dredged clayey soil both in mechanical and environmental aspect. It can be also expected that this study can propose a basic design data to use the lean-mixed soil cement.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.35 no.3
• /
• pp.141-148
• /
• 2022

In this study, the structural behavior of reinforced concrete members under simultaneous axial and blast loads was analyzed. Nonlinear dynamic analysis verification was performed using the experimental data of panels under fundamental blast load as well as those of reinforced concrete columns subjected to axial and blast loads. Because Autodyn is a program designed only for dynamic analysis, an analysis process is devised to simulate the initial stress state of members under static loads, such as axial loads. A total of 80 nonlinear dynamic finite element analysis procedures were conducted by selecting parameters corresponding to axial load ratios and scaled distances ranging 0%~70% and 1.1~2.0 (depending on the equivalent of TNT), respectively. The structural behavior was compared and analyzed with the corresponding degree of damage and maximum lateral displacement through the changes in axial load ratio and scaled distance. The results show that the maximum lateral displacement decreases due to the increase in column stiffness under axial loads. In view of the foregoing, the formulated analysis process is anticipated to be used in developing blast-resistant design models where structural behavior can be classified into three areas considering axial load ratios of 10%~30%, 30%~50%, and more than 50%.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.25 no.6
• /
• pp.226-234
• /
• 2021

The objective of this study is to establish the fundamental design data for axial load-displacement relationship under axial monotonic or cyclic responses of seismic damping·isolation (SDI) units developed for ceiling structures. The main parameters include the installation of a spring, the number of rubber layer, prestress stress of bolts for connector between the spring and rubbers, and loading type. Test results showed that SDI units with a spring in the core and higher prestress stress of bolts tended to be higher stiffness at the ascending branch and more ductile behavior at the descending branch. This trends more notable for the specimens under monotonic load rather than cyclic loads. Consequently, the energy dissipation of SDI unit can be optimally designed with the following conditions: installation of a spring within 3-layer rubbers and prestress applied to the bolts at 10% of their yielding strength . When compared with the experimental tension capacity of the developed SDI units, the predictions by JIS B 2704-1 and KDS 31 00 are conservative under monotonic loading but higher by approximately 10% under cyclic loading.

• Science of Emotion and Sensibility
• /
• v.25 no.2
• /
• pp.45-54
• /
• 2022

This study aimed to investigate the effect of subjective factors (figure recognition and stress) and objective factors (blood biochemical parameters) on body mass index by gender difference in Korean adults. This study analyzed 3,343 subjects older than 20 years according to gender using the Sixth Korean National Health and Nutrition Examination Survey database. Specifically, male subjects had higher body mass index than female subjects (p < .001) and were more frequent in the obese group. Female subjects had higher stress and platelet score than male subjects (p < .001). Male subjects had significantly higher white blood cell counts (p < .001). The factors affecting the occurrence of obesity by gender difference was highly associated with subjective figure recognition (95% CI = 0.026~0.045, p < .001), stress (95% CI = 0.487~0.925, p = .015) and white blood count (95% CI = 1.232~1.392, p < .001) in females. These findings demonstrate a gender-specific difference in recognizing subjective factors and especially the objective factors of white blood cells and platelets affecting obesity. These results can be used for obesity education or fundamental data for establishing a nursing arrangement program for Korean adults.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.25 no.5
• /
• pp.357-371
• /
• 2023

In cable tunnel construction using TBM, the vertical shaft is an essential structure for entrance and exit of TBM equipment and power lines. Since a shaft penetrates the ground vertically, it often encounters rock mass. Blasting or rock splitting methods, which are mainly used to the rock excavation, cause public complaints due to the noise, vibration and road occupation. Therefore, mechanical excavation using vertical shaft excavation machine are considered as an alternative to the conventional methods. However, at the current level of technology, the vertical excavation machine has limitation in its performance when applied for high strength rock with a compressive strength of more than 120 MPa. In this study, the potential utilization of waterjet technology as an excavation assistance method was investigated to improve mechanical excavation performance in the hard rock formations. Rock cutting experiments were conducted to verify the cutting performance of the abrasive waterjet. Based on the experimental result, it was found that ensuring excavation performance with respect to changing in ground conditions can be achieved by adjusting waterjet parameters such as standoff distance, traverse speed and water pressure. In addition, based on the relationship between excavation performance, uniaxial compressive strength and RQD, it was suggested that excavation performance could be improved by artificially creating joints using the abrasive waterjet. It is expected that these research results can be utilized as fundamental data for the introduction of vertical shaft excavation machines in the future.

• Smart Media Journal
• /
• v.12 no.10
• /
• pp.102-109
• /
• 2023

This study aimed to investigate the growth parameters and antioxidant activity of Cnidium officinale under controlled temperature and carbon dioxide levels during the cultivation period. The plants were cultivated for four months, each group being set at the average temperature of the cultivation area +1.8℃/445ppm(SSP1), +3.6℃/872ppm(SSP3), and +4.4℃/1,142ppm(SSP5), respectively. During the cultivation period, the growth, Top/Root ratio, and leaf weight ratio(LWR) of C. officinale slightly decreased in SSP3 and SSP5 compared to SSP1, while the root weight ratio(RWR) increased. The antioxidant activity and related phenolic compound content in the aerial parts of C. officinale increased proportionally with temperature and CO₂ concentration. However, an adverse effect was observed in the high-concentration SSP5 group. Conversely, in the roots, the SSP5 group exhibited the highest antioxidant activity. This study suggests that it can be utilized as fundamental data necessary for understanding the correlation between environmental conditions and the growth as well as physiological activities of medicinal plants.