• Journal of the Korean Society of Laryngology, Phoniatrics and Logopedics
• /
• v.7 no.1
• /
• pp.61-68
• /
• 1996

Failure to change from the higher pitched voice of preadolescence to the lower pitched voice of adolescence and adulthood is called "mutational dysphonia" The voice is weak, thin, breathy, hoarse, and mono-pitched. If the voice theraphy was failed, surgery to lower vocal pitch which is refered to thyroplasty type III, is indicated. We compared the post-op acoustic parameters with pre-op data in unilateral antero-posterior shortening of the thyroid cartilage method and bilateral antero-posterior shortening of the thyroid cartilage method each other. Bilateral antero-posterior shortening of the thyroid cartilage method shows significant drop of fundamental frequency and speaking fundamental frequency statistically than unilateral shortening method. There was no significant differences in Jitter, Shimmer, SNR, MFR and other psychoacoustic analysiss parameters between two groups. These data shows that unequal tension of the vocal cord in uilateral antero-posterior shortening of the thyroid cartilage method does not control the pitch effectively so bilatreal shortening method in Type III thyroplasty is recommandable procedure in surgery of the mutational dysphonia.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.12 no.8
• /
• pp.598-608
• /
• 2002

This paper shows the optimal design methodology for the fluid engine mount by the artificial life algorithm. The design has been commonly modified by trial and error because there is many design parameters that can be varied in order to minimize transmissibility at the desired fundamental resonant and notch frequencies. The application of trial and error method to optimization of the fluid mount is a great work. Many combinations of parameters are possible to give us the desired resonant and notch frequencies, but the question is which combination Provides the lowest resonant peak and notch depth. In this study the enhanced artificial life algorithm is applied to get the desired fundamental resonant and notch frequencies of a fluid mount and to minimize transmissibility at these frequencies. The present hybrid algorithm is the synthesis of and artificial life algorithm with the random tabu (R-tabu) search method. The hybrid algorithm has some advantages, which is not only faster than the conventional artificial life algorithm, but also gives a more accurate solution. In addition, this algorithm can find all globa1 optimum solutions. The results show that the performance of the optimized mount compared with the original mount is improved significantly.

• Wind and Structures
• /
• v.29 no.3
• /
• pp.209-223
• /
• 2019

The assessment of wind-induced vibration for tall reinforced concrete (RC) buildings requires the accurate estimation of their dynamic properties, e.g., the fundamental vibration periods and damping ratios. In this study, RC frame-shear wall systems designed under gravity and wind loadings have been evaluated by utilising 3D FE modelling incorporating eigen-analysis to obtain the elastic periods of vibration. The conducted parameters consist of the number of storeys, the plan aspect ratio (AR) of buildings, the core dimensions, the space efficiency (SE), and the leasing depth (LD) between the internal central core and outer frames. This analysis provides a reliable basis for further investigating the effects of these parameters and establishing new formulas for predicting the fundamental vibration periods by using regression analyses on the obtained results. The proposed constrained numerically based formula for vibration periods of tall RC frame-shear wall office buildings in terms of the height of buildings reasonably agrees with some cited formulas for vibration period from design codes and standards. However, the same proposed formula has a high discrepancy with other cited formulas from the rest of design codes and standards. Also, the proposed formula agrees well with some cited experimentally based formulas.

• Earthquakes and Structures
• /
• v.21 no.5
• /
• pp.477-487
• /
• 2021

This study focuses on the influence of strong ground motion duration on the response and collapse probability of reinforced concrete walls with a predominant response in flexure. Walls with different height and mass were used to account for a broad spectrum of configurations and fundamental periods. The walls were designed following the specifications of the Chilean design code. Non-linear models of the reinforced concrete walls using a distributed plasticity approach were performed in OpenSees and calibrated with experimental data. Special attention was put on modeling strength and stiffness degradation. The effect of duration was isolated using spectrally equivalent ground motions of long and short duration. In order to assess the behavior of the RC shear walls, incremental dynamic analyses (IDA) were performed, and fragility curves were obtained using cumulative and non-cumulative engineering demand parameters. The spectral acceleration at the fundamental period of the wall was used as the intensity measure (IM) for the IDAs. The results show that the long duration ground motion set decreases the average collapse capacity in walls of medium and long periods compared to the results using the short duration set. Also, it was found that a lower median intensity is required to achieve moderate damage states in the same medium and long period wall models. Finally, strength and stiffness degradation are important modelling parameters and if they are not included, the damage in reinforced concrete walls may be greatly underestimated.

• The Journal of Korea Robotics Society
• /
• v.17 no.1
• /
• pp.76-85
• /
• 2022

One of the most fundamental challenges when designing controllers for dynamic systems is the adjustment of controller parameters. Usually the system model is used to get the initial controller, but eventually the controller parameters must be manually adjusted in the real system to achieve the best performance. To avoid this manual tuning step, data-driven methods such as machine learning were used. Recently, reinforcement learning became one alternative of this problem to be considered as an agent learns policies in large state space with trial-and-error Markov Decision Process (MDP) which is widely used in the field of robotics. However, on initial training step, as an agent tries to explore to the new state space with random action and acts directly on the controller parameters in real systems, MDP can lead the system safety-critical system failures. Therefore, the issue of 'safe exploration' became important. In this paper we meet 'safe exploration' condition with Control Barrier Function (CBF) which converts direct constraints on the state space to the implicit constraint of the control inputs. Given an initial low-performance controller, it automatically optimizes the parameters of the control law while ensuring safety by the CBF so that the agent can learn how to predict and control unknown and often stochastic environments. Simulation results on a quadrotor UAV indicate that the proposed method can safely optimize controller parameters quickly and automatically.

• International Journal of Aeronautical and Space Sciences
• /
• v.18 no.2
• /
• pp.352-364
• /
• 2017

A novel 3D mathematical model for water film runback and icing on a rotating surface is established in this work, where both inertial forces caused by the rotation and shear forces due to the air flow are taken into account. The mathematical model of the water film runback and energy conservation of phase transition process is established, with a cyclical average method applied to simulate the unsteady parameters variation at angles of attack. Ice accretion on a conical spinner surface is simulated and the results are compared with the experimental data to validate the presented model. Then Ice accretion on a cowling surface is numerically investigated. Results show that a higher temperature would correspond to a larger runback ice area and thinner ice layer for glaze ice. Rotation would enhance the icing process, while it would not significantly affect the droplet collection efficiency for an axi-symmetric surface. In the case at angle of attack, the effect of rotation on ice shape is appreciable, ice would present a symmetric shape, while in a stationary case the shape is asymmetric.

• Journal of Sensor Science and Technology
• /
• v.25 no.2
• /
• pp.138-142
• /
• 2016

A pulse measurement by tonometry provides useful information for diagnosis, including not only blood pressure and heart rate but also parameters for estimating a condition of the cardiovascular system. Currently, various pulse measurement devices based on the tonometry have been developed. A reliability of these devices is determined by a positioning technic between the sensor and the blood vessel and a controlling technique of the pressurization level. An angle of the sensor for the pulse measurement seems to be highly related with a measured signal, however, the objective studies for this issue have been not published. In this paper, the variation of the pulse signals by tonometry direction was experimentally assessed according to the angle of the sensor. In order for guaranteeing the repeatability of the experiment, we used a pulse generator device, which can generate human pulse signal by using silicon tube and fluid pump, and developed a structure for precise adjustment of the angle and the pressurization level of the sensor. The angle of the sensor was acquired by an inclinometer, which was attached at the opposite side of the sensor. As results, a coefficient of variation (CV) of a maximum amplitude (MA) of the pulse wave was largely increased over the angle range of $-9{\sim}9^{\circ}$. Furthermore, the changes of the pulse shape showed different aspects according to the sign of the angle tilted along the blood vessel. It is expected that the results of this study can be helpful for developing more precise pulse measurement devices based on the tonometry and applying in clinic.

• The Journal of the Acoustical Society of Korea
• /
• v.25 no.5
• /
• pp.207-212
• /
• 2006

The purpose of this study was to compare voice parameters in auditory conditions (normal/noise/music) between a teacher group and a control group. Results of statistical analysis showed that the teacher group had higher jitter (%) and shimmer (%) values than the control group. It indicated that the teacher group had larger variations in pitch and dynamic of their voice. In the teacher group, the voice under noisy condition showed a higher value of fundamental frequency than that under normal condition. though its fundamental frequency did not show any significant difference between the noisy condition and the musical condition. In the control group, however, although the voice under noisy condition also showed a higher value of fundamental frequency than that under normal condition, its fundamental frequency was significantly different between the noisy condition and the musical condition.

• Journal of the Korean Society for Precision Engineering
• /
• v.29 no.12
• /
• pp.1360-1367
• /
• 2012

A bending process is considered as one of fundamental sheet metal forming processes, and it is widely used for fabrication of simple or complicated sheet metal products in industrial fields. Most of automobiles and electronics have many parts made by the bending process inside or outside of them. However, till now, there is few research reports on the bending process of hemmed plates. A hemmed plate has a locally different bending strength, so a waving shape occurs after bending. A poor outlook due to local uneven shape influences greatly on product competitiveness. To settle this problem, we studied the bending parameters of a hemmed plate and showed the major sensitive design-parameters on the bending quality.

• 제어로봇시스템학회:학술대회논문집
• /
• 1996.10a
• /
• pp.334-337
• /
• 1996

This is a paper intended for initial stage of vehicle modeling and design. The needs to determine a variety of vehicle suspension parameters required for initial design has been difficult and time-consuming task. In order to facilitate a concise and efficient presentation of initial vehicle design procedure, this paper uses a mathematical model and physical geometry. Vehicle model consists of dimensions, inertias and mechanical constants. These vehicle model parameters divided into several categories : basic parameters, coefficients and constants, design specification, spring and damper, bush stiffness, stabilizer bar, suspension geometry, tire, and vehicle weights of various design condition. This paper uses a vehicle design fundamental (VDF) program running under Windows 95 graphical interface. The features of VDF will be briefly outlined in this paper.