• Computers and Concrete
• /
• v.32 no.1
• /
• pp.75-85
• /
• 2023

This work utilizes simplified higher-order shear deformation beam theory (HSDBT) to investigate the vibration response for functionally graded carbon nanotube-reinforced composite (CNTRC) beam. Novel to this work, single-walled carbon nanotubes (SWCNTs) are distributed and aligned in a matrix of polymer throughout the beam, resting on a viscoelastic foundation. Four un-similar patterns of reinforcement distribution functions are investigated for the CNTRC beam. Porosity is another consideration taken into account due to its significant effect on functionally graded materials (FGMs) properties. Three types of uneven porosity distributions are studied in this study. The damping coefficient and Winkler's and Pasternak's parameters are considered in investigating the viscosity effect on the foundation. Moreover, the impact of different parameters on the vibration of the CNTRC beam supported by a viscoelastic foundation is discussed. A comparison to other works is made to validate numerical results in addition to analytical discussions. The findings indicate that incorporating a damping coefficient can improve the vibration performance, especially when the spring constant factors are raised. Additionally, it has been noted that the fundamental frequency of a beam increases as the porosity coefficient increases, indicating that porosity may have a significant impact on the vibrational characteristics of beams.

• Geomechanics and Engineering
• /
• v.34 no.3
• /
• pp.317-328
• /
• 2023

The soil behaviour can be represented by numerical modelling of element testing using diverse constitutive models. However, not all constitutive models allow the simulation of the stress-strain response at the critical state in granular soils with both contractive and dilative behaviour. Moreover, the accuracy of these models depends highly on the quality of the experimental data used for their calibration. This study addresses the modelling of the critical state behaviour of an alluvial natural soil from the Lower Tagus Valley (south of Portugal), known as TP-Lisbon sand, using the NorSand constitutive law. For this purpose, a series of numerical simulations of element testing was carried out using two algorithms performed in Visual Basic (VB) and Fast Lagrangian Analysis of Continua (FLAC). Moreover, this study presents the characterisation of of NorSand parameters from an accurate experimental programme based on triaxial and bender element testing. This experimental program allowed defining: (i) the critical state locus, (ii) the stress-dilatancy, and (iii) the soil elasticity of TP-Lisbon sand -all fundamental to calibrate the contractive and dilative behaviour of such alluvial soil. The results revealed a good agreement between experimental data and NorSand simulations using VB and FLAC. Therefore, this study showed that the quality of laboratory testing procedures and its good interpretation enables NorSand constitutive law to capture representatively the non-associated plastic strains, often expressed by the state parameter, allowing a representation of soil behaviour of alluvial soils within the critical state soil mechanics framework for different state parameters.

• Fisheries and Aquatic Sciences
• /
• v.27 no.9
• /
• pp.622-633
• /
• 2024

This study aimed to evaluate the effects of various plant-derived carotenoid extracts on growth parameters and skin coloration of golden trevally (Gnathanodon speciosus). Five groups of fish were fed diets containing carotenoid sources from the petal extracts of the leopard tree (Caesalpinia ferrea), wild sunflower (Tithonia diversifolia), marigold (Tagetes erecta), yellow bells (Tecoma stans), Wedelia chinensis (Wedelia chinensis), along with a control group, each diet had a carotenoid concentration of 0.25 g/kg feed. The diets were based on the same fundamental ingredients and administered for 56 days. Results showed significant differences in growth parameters among the different diets, with wild sunflower and marigold petal extracts proving most effective in enhancing the skin coloration of golden trevally. High yellow (CIE b^*), ranging from 17.2 to 18.8, were observed (Minolta CR-400), compared to only 12.2 ± 0.34 in the control group. Additionally, the carotenoid content in the tissue of the various groups differed significantly (p < 0.05), with the highest level of carotenoids (71.2 ± 2.9 ㎍/g tissue) detected in the fish skin of the dietary marigold flower group (UV-visible spectrophotometry). It is suggested that the petals of wild sunflowers and marigolds can efficiently improve body pigmentation and growth performance in golden trevally, indicating that these plant-derived carotenoids may have potential applications in aquaculture.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.31 no.4
• /
• pp.307-325
• /
• 1995

IN order to gain a fundamental data for forecast or control of fish behavior and evaluated the feasibility of an application of the modeling technique to a field, in this paper a numerical model for describing the behavior of fishes in a water tank was presented. The parameters of the model were estimated by using the time-series data on the three-dimensional position of fishes and by applying the least squares algorithm. The estimated parameters were standardized to examine the variation of parameters according to the number of individuals and flow speed that the mean values of parameters were to be zero and their variances were to be one. The results obtained can be summarized as follows: (1) The standardized parameter $a^*$of propulsive force decreased according to increased the number of individuals and the flow speed. (2) The standardized parameter ${k_b}^*$ of interactive force increased according to increased the number of individuals, but decreased according to the flow speed. (3) The standardized parameter ${k_c}^*$ of schooling force increased according to │increased the number of individuals and the flow speed. (4) The standardized parameter │${k_w}^{+*}$│ of repulsive force against wall or bottom increased according to increased the number of individuals, but decreased according to the flow speed. (5) The standardized parameter │${k_w}^{-*}$│ of attractive force against wall or bottom was generally constant according to increased the number of individuals, but increased according to the flow speed. (6) The standardized parameter $\upsilon$ super(*) of damping force increased according to increased the number of individuals, but decreased according to the flow speed.

• Journal of the Korean Society of Laryngology, Phoniatrics and Logopedics
• /
• v.27 no.2
• /
• pp.108-113
• /
• 2016

Background and Objectives : After thyroidectomy, many patients experience problems report such things as reduced voice range and vocal fatigue, swallowing problems without superior and recurrent laryngeal nerve injury. The purpose of this study was to evaluate voice and swallowing problems before and after thyroid surgery without laryngeal nerve injury. Materials and Methods : Ninety-three patients who underwent thyroidectomy without laryngeal nerve injury and completed the follow-up evaluations were studied between June 2013 and December 2015. Each evaluation was performed preoperatively, as well as 1 week, 1 month postoperatively. Analysis was performed including voice handicap index (VHI), dysphagia handicap index (DHI), and acoustic voice analysis. Results : Patients show significant variation of parameters in the fundamental frequency (F), maximal phonation time (MPT), shimmer, jitter and soft phonation index (SPI) early after operation, and most of them showed recovery of parameters after 1month of operation. Perceptive complaint of voice and swallowing also showed significant decreased after operation (p<0.005). After 1month of operation, MPT, highest frequency and frequency ranges still showed significant decreased parameters. Comparing acoustic and perceptive parameters of total thyroidectomy and lobectomy, there was no significant changes between them except highest frequency (p=0.042). Conclusion : The results from both subjective and objective evaluations show voice and swallowing disturbance after thyroidectomy even in the absence of laryngeal nerve and provide patients information about the recovery process after surgery. Highest frequency parameter showed most significant changes after operation.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.6D
• /
• pp.951-960
• /
• 2006

Structural pavement analysis considering lateral loads of moving vehicle was carried out in order to simulate passing vehicle loads under various interface conditions. To verify of existing multi-layer elastic analysis of layer interface effect parameters, this study compared outputs by using ABAQUS, a three dimensional finite element program and KENLAYER, multi-layer elastic analysis as vertical load was applied to the surface of asphalt pavements. Pavement performance depending on interface conditions was quantitatively evaluated and fundamental study of layer interface effect parameters was performed in this study. As results of the study, if only vertical loads of moving vehicle is applied, subdivision of either fully bonded or fully unbonded is enough to indicate interface effect parameters. On the other hand, when lateral loads are applied with vertical loads, pavement behavior and performance are greatly changed with respect to layer interface conditions. The thinner thickness of the asphalt layer is and the smaller elastic moduli of the asphalt layer is, the more pavement behavior is influenced by interface conditions. In addition, regression analysis equation analytically computing tensile strain which was considered thicknesses and elastic moduli of the asphalt layer and layer interface effect parameters at the bottom of the asphalt layer was presented using database from numerical analyses on national pavement model sections.

• Journal of electromagnetic engineering and science
• /
• v.3 no.2
• /
• pp.118-125
• /
• 2003

This paper presents a 5.8-㎓ oscillator that uses a novel defected ground structure(DGS), which is etched on the metallic ground plane. As the suggested defected ground structure is the structure for mounting an active device, it is the roles of a feedback loop inducing a negative resistance as well as a frequency-selective circuit. Applying the feedback loop between the drain and the gate of a FET device produces precise phase conversion in the feedback loop. The equivalent circuit parameters of the DGS are extracted by using a three-dimensional EM simulation ,md simple circuit analysis method. In order to demonstrate a new DGS oscillator, we designed the oscillator at 5.8-㎓. The experimental results show 4.17 ㏈m output power with over 22 % dc-to-RF power efficiency and - 85.8 ㏈c/Hz phase noise at 100 KHz offset from the fundamental carrier at 5.81 ㎓.

• Food Science and Biotechnology
• /
• v.15 no.5
• /
• pp.664-671
• /
• 2006

Modeling the growth kinetics of lactic acid bacteria (LAB), one of the most valuable microbial groups in the food industry, has been actively pursued in order to understand, control, and optimize the relevant fermentation processes. Most modeling approaches have focused on the development of single population models. Primary single population models provide fundamental kinetic information on the proliferation of a primary LAB species, the effects of biological factors on cell inhibition, and the metabolic reactions associated with cell growth. Secondary single population models can evaluate the dependence of primary model parameters, such as the maximum specific growth rate of LAB, on the initial external environmental conditions. This review elucidates some of the most important single population models that are conveniently applicable to the LAB fermentation analyses. Also, a well-defined mixed population model is presented as a valuable tool for assessing potential microbial interactions during fermentation with multiple LAB species.

• Journal of Surface Science and Engineering
• /
• v.41 no.5
• /
• pp.199-204
• /
• 2008

Indium tin oxide (ITO) has been commonly used as an anode for organic light emitting diode (OLED), because of its relatively high work function, high transmittance, and low resistance. The ITO was mostly deposited by capacitive type DC or RF sputtering. In this study we introduced a new facing target sputtering method. On applying this new sputtering method, the effect of fundamental deposition parameters such as substrate heating and post etching were investigated in relation to the resultant I-V-L characteristics of OLED. Three kinds of ITOs deposited at room temperature, at $400^{\circ}C$ and at $400^{\circ}C$ with after surface modification by $O_2$ plasma etching were compared. The OLED on ITO deposited with substrate heating and followed by etching showed better I-V-L characteristics, which starts to emit light at 4 volts and has luminescence of $65\;cd/m^2$ at 9 volts. The better I-V-L characteristics were ascribed to the relevant surface roughness with uniform micro-extrusions and to the equi-axed micromorphology of ITO surface.

• Journal of Astronomy and Space Sciences
• /
• v.25 no.2
• /
• pp.77-86
• /
• 2008

Large survey observations such as the EROS, the MACHO and the OGLE projects have discovered a large number of eclipsing binaries in the extra galaxies and published their light curves. The light curves of the eclipsing binaries provide fundamental stellar parameters so that accumulation of the light curves will be very useful for the research of the stellar astronomy. However it requires a lot of time to analyze the light curves. Therefore we developed new method to analyze the large number of light curves in the relatively short time period and found the photometric solution by analyzing the light curves of 20 eclipsing binaries, whose mass ratio can be determined by photometic method, in the Small Magellan Cloud.