• International Journal of Precision Engineering and Manufacturing
• /
• v.4 no.3
• /
• pp.55-61
• /
• 2003

The form accuracy of parts has become an important parameter. Therefore, not only dimensional tolerance but also geometric tolerances are used in the design stage to satisfy the required quality and functions of parts. But the information on the machining conditions, which can satisfy the assigned geometric tolerance in do sign, is insufficient. The objectives of this research are to study the effects of the grinding parameters such as traverse speed, work speed, depth of cut, and dwell time on the after-ground workpiece shape, and to find out the major parameters among them The results are as follows; The effects of work speed and depth of cut on the workpiece shape are negligible compared with the effect of traverse speed. These is an optimal dwell time depending on the traverse speed. The optimal dwell time is decreasing as the traverse speed is increasing.

• Proceedings of the KSME Conference
• /
• 2001.06c
• /
• pp.327-332
• /
• 2001

An experimental design technique is developed for estimating the moments of system response functions. It is easy to implement and provides accurate results compared with other traditional methods. It is based on the work of Taguchi, later improved by D'Errico and Zaino. The existing experimental techniques, however, is applicable only for normally distributed cases. In this article the three-level Taguchi method is extended to obtain optimum choice for levels and weights to handle nonnormal distributions. A systematic procedure for reliability analysis is then proposed by using the Pearson system and the narrow system reliability bounds. Illustrative examples including a tolerance optimization problem are shown very accurate comparing with those by Monte-Carlo simulations and the first-order reliability method.

• 제어로봇시스템학회:학술대회논문집
• /
• 1993.10a
• /
• pp.959-964
• /
• 1993

We developed fault diagnosis fuzzy expert system for ACS(Advanced Control System). ACS is a DCS(Distributed Control System) with advanced control algorithm fault tolerance capabilities, fault diagnosis functions, and so on. Fuzzy expert system developed for an ACS in this paper gives an operator alarm signal depending on the state of process value and manipulated value, and the cause of alarm in real time. Simple experiment result with several rules for the-fault-diagnosis of drum level loop in Seoul-Power-Plant.

• Journal of Life Science
• /
• v.18 no.6
• /
• pp.891-896
• /
• 2008

The function of mast cells as effector cells in allergy has been extensively studied. Mast cells activated through high affinity IgE-receptor ($Fc{\varepsilon}RI$) release diverse mediators, and lead to smooth muscle constriction, vasodilation, increase of vascular permeability, leukocyte recruitment and activation, mucus secretion, and tissue proliferation and remodeling. However, various other immunological and non-immunological signals can lead to the activation of mast cells. In resent years, mast cells have been identified to be involved in a complex range of immune functions. Mast cells can be important as key players in the regulation of innate as well as adapted immune responses, and may influence the development of allergy, autoimmune disorder and peripheral tolerance. This review summarizes the recent advances in the understanding of effector functions of mast cells in immune responses.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2002.02a
• /
• pp.3-10
• /
• 2002

In this study on machine measuring system based on solid feature was developed. This system was applied with injection mold using 3 dimensional solid modeler for verification. Developed program include pre-processor, main processor, and post processor. In pre-processor there are functions which check intersection, simulate motion of probe and calculate measuring time. Main processor generates measuring path and output NC code in Unigraphics. In post-processor functions that include evaluation of undercut or overcut and display of measuring procedure are offered. In addition analysis module for quality control of measured data on manufactured product was developed with geometric and dimensional tolerance concept. As the result developed program could get stability of system, precision of product, rapidity and cost down of manufacturing process compared with before measuring process.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• v.4 no.3
• /
• pp.300-305
• /
• 2004

This paper concerns controller design for the Takagi-Sugeno (TS) fuzzy systems. The design method proposed in this paper is derived in the framework of the optimal control theory utilizing the piecewise quadratic optimal value functions. The major part of the proposed design procedure consists of solving linear matrix inequalities (LMIs). Since LMIs can be solved efficiently within a given tolerance by the recently developed interior point methods, the design procedure of this paper is useful in practice. A design example is given to illustrate the applicability of the proposed method.

• The Transactions of the Korea Information Processing Society
• /
• v.6 no.11S
• /
• pp.3340-3349
• /
• 1999

Supporting object group on distributed object system give merits such as load balancing, fault tolerance and high availability. In this paper, we describe a CORBA ORB that has been designed to support object group based on active replication. The ORB supports the operational model in which it uses the IIOP for communication between client and server and total ordered multicast protocol for consistency control among group members. And through extension of ORB, it provides functions required for support of object group. Since it provides transparency of object replication, the ORB is interoperable with the existing CORBA products. It make possible for existing server application to be easily extended to application supporting object group as adding interface functions which should be used for building applications is minimized. A prototype is implemented, and performance of the replicated object group is tested and compared with a single object invocation.

• Journal of KIISE:Computing Practices and Letters
• /
• v.13 no.7
• /
• pp.545-549
• /
• 2007

The Bio-Inspired System focuses on the creation of an effective system model for massive network applications and is being widely developed. However, the system has a problem-difficulty implementing three features in the system, which includes scalability, adaptability and survivability. To solve this problem, we designed an Ecogent as a multiple intelligence agent, and a Bio-platform to address the three features of scalability, adaptability and survivability. The Bio-Inspired System Platform consists of an ERS (Ecogent Runtime Services) Platform and a Bio-Platform. The ERS platform serves the basic functions of mobile agents, such as Registration, Life Cycle, Migration, Communication, Location and Fault Tolerance. The Bio-Platform includes the functions of Evolution Control and Stigmergy Control to address evolution and adaptation.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2022.10a
• /
• pp.283-283
• /
• 2022

Abiotic stresses such as high/low temperature, drought, salinity, and submergence directly or indirectly influence the physiological status and molecular mechanisms of rice which badly affect yield. Especially, the low temperature causes harmful influences in the overall process of rice growth such as uneven germination and the establishment of seedlings, which has become one of the main limiting factors affecting rice production in the world. It is of great significance to find the candidate genes controlling low-temperature tolerance during seed germination and study their functions for breeding new rice cultivars with immense low-temperature tolerance during seed germination. In this study, 120 lines of Cheongcheong/Nagdong double haploid population were used for quantitative trait locus analysis of low-temperature germinability. The results showed significant difference in germination under low different temperature conditions. In total, 4 QTLs were detected on chromosome 3, 6, and 8. A total of 41 genes were identified from all the 4 QTLs, among them, 25 genes were selected by gene function annotation and further screened through quantitative real time polymerase chain reaction. Based on gene function annotation and level of expression under low-temperature, our study suggested OsGPq3 gene as a candidate gene controlling viviparous germination, ABA and GA signaling under low-temperature. This study will provide a theoretical basis for marker-assisted breeding.

• Journal of Soil and Groundwater Environment
• /
• v.21 no.5
• /
• pp.16-24
• /
• 2016

A new strain of Pseudomonas sp. was isolated from mercury (Hg)-contaminated sites in Taiwan. This bacterium removed more than 80% of Hg present in the culture medium at 12 h incubation and was chosen for further analysis of the molecular mechanisms of Hg tolerance/removal abilities in this Pseudomonas sp. We used RNA-seq, one of the next-generation sequencing methods, to investigate the transcriptomic responses of the Pseudomonas sp. exposed to 60 mg/L of Hg²⁺. We de novo assembled 4,963 contigs, of which 10,533 up-regulated genes and 5,451 down-regulated genes were found to be regulated by Hg. The 40 genes most altered in expression levels were associated with tolerance to Hg stress and metabolism. Functional analysis showed that some Hg-tolerant genes were related to the mer operon, sulfate uptake and assimilation, the enzymatic antioxidant system, the HSP gene family, chaperones, and metal transporters. The transcriptome were analyzed further with Gene Ontology (GO) and Cluster of Orthologous Groups (COGs) of proteins and showed diverse biological functions and metabolic pathways under Hg stress.