• Journal of the Korean Wood Science and Technology
• /
• v.48 no.4
• /
• pp.503-512
• /
• 2020

Using Na₂CO₃ versus NaCl as chemical activator, we compared the quality of activated carbon produced from oil palm fronds as raw material. These activators were selected for comparison because both are readily available and are environmentally friendly. In the manufacturing, we used Indonesian National Standard (SNI 06-3730-1995) parameters. For the quality comparison, we determined activated-carbon yield, moisture, ash, volatiles, and fixed-carbon contents; and adsorption capacity of iodine. The best characteristics, assessed by morphological surface analysis and Fourier transform infrared (FTIR) spectral analysis, were observed in the carbon activated by Na₂CO₃ at an activator concentration of 10% and carbonization temperature of 400 ℃. The results were as follows: activated-carbon yield, 84%; water content, 8.80%; ash content, 2.20%; volatiles content, 14.80%; fixed-carbon content, 68.60%; and adsorption capacity of iodine, 888.51 mg/g. Identification using the FTIR spectrophotometer showed the presence of the functional groups O-H, C=O, C=C, C-C, and C-H in the Na₂CO₃-activated carbon.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.47 no.6
• /
• pp.66-72
• /
• 2015

This study was conducted to investigate the effects of optical brightening agents (OBA) on the chemical degradation characteristics of paper cellulose during humid heating aging. Three different types of OBAs were applied to a filter paper by dipping it in OBA solutions whose concentrations were controlled to 1% and 2%. The filter papers with an OBA were artificially aged at $80^{\circ}C$ and 65% RH, and the changes in pH of paper and viscosity of cellulose were evaluated. Their functional groups were also analyzed by ATR-FTIR (at-tenuated total reflectance fourier transform infrared spectroscopy). It was found that OBAs influenced the chemical degradation of paper cellulose during humid heating aging. Higher concentration of OBA solutions accelerated the degradation of paper cellulose. Especially, after aging for 12 days, the paper cellulose treated with the tetra-type OBA were the most significantly aged among the three types of OBAs. It was assumed that pH of OBA solutions affected the aging characteristics.

• Applied Science and Convergence Technology
• /
• v.23 no.4
• /
• pp.187-191
• /
• 2014

Indium oxide ($In_2O_3$) nanorods (NRs) which can be expected to increase the device performance in various electronic and electrochemical applications were prepared on carbon fibers via an electrochemical deposition (ED) method. During the ED, the indium hydroxide ($In(OH)_3$) NRs were well grown and firmly attached onto the carbon fibers. After that, they were changed into $In_2O_3$ by dehydration through a thermal annealing. The morphological and structural properties were investigated using field-emission scanning electron microscope images. The crystallinity of as-prepared sample was evaluated by X-ray diffraction. The Fourier transform infrared results confirm that the functional groups are present in the $In_2O_3$ NRs. This facile process of metal oxide nanostructures on carbon fiber can be utilized for flexible electronic and energy related applications.

• Journal of the military operations research society of Korea
• /
• v.25 no.2
• /
• pp.15-30
• /
• 1999

A number of combat simulation models are scattered and the analytic solution approaches have experienced very difficult computational efforts. Today´s computer communication technology let people to do many unrealistic things possible and the use of those technologies is becoming increasingly prevalent throughout the military operation. Both DIS and ADS are welled defined computer aided military simulations. This study discusses a simulation of stochastic combat network modeling through Internet space. We have developed two separate simulation models, one for clients and another for server, and validated for conducting studies with these models. The object-oriented design was necessary to define the system entities and their relationship, to partition functionality into system entities, and to transform functional metrics into realizations derived from system component behaviors. Heterogeneous forces for each side are assumed at any battle node. The time trajectories for mean number of survivors and combat history at each node, some important combat measures, and relative difference computations between models were made. We observe and may conclude that the differences exit and some of these are significant based on a limited number of experiments.

• Broadcasting and Media Magazine
• /
• v.11 no.1
• /
• pp.68-77
• /
• 2006

The Cognitive Radio (CR) technology is a promising solution for exploiting the limited spectrum resources and providing flexibility of spectrum usage. Future interactive broadcasting service can be realized by utilizing CR concept, since the up-link return channel can be found by the spectrum sensing method, which is core functional block of the CR system. In this paper, the spectrum sensing technologies of CR system is presented. First the system architecture of the CR with spectrum sensing block is presented. The suggested spectrum sensing technique consists of the coarse and the fine spectrum sensing. The coarse spectrum sensing technique adopted the wavelet transform to provide the multi-resolution sensing feature - Multi-Resolution Spectrum Sensing (MRSS). The fine spectrum sensing technique uses the beneficial properties of the autocorrelation function Analog Auto-Correlation (AAC). The simulation results for the proposed sensing technologies are presented for various incumbent signals.

• Mass Spectrometry Letters
• /
• v.1 no.1
• /
• pp.9-12
• /
• 2010

Trimethylboroxine (TMB) is a six-membered ring compound containing Lewis acidic boron and Lewis basic oxygen atoms that can bind halide anion and alkali metal cation, respectively. We employed Fourier transform ion cyclotron resonance spectroscopy to study the gas-phase binding of $LiBrLi^+$ and $F^-(KF)_2$ to TMB. TMB forms association complexes with both $LiBrLi^+$ and $F^-(KF)_2$ at room temperature, providing direct evidence for the ditopic binding. Interestingly, the $TMB{\cdot}F^-(KF)_2$ anion complex is formed 33 times faster than the $TMB{\cdot}Li^+BrLi$ cation complex. To gain insight into the ditopic binding of an ion pair, we examined the structures and energetics of $TMB{\cdot}Li^+$, $TMB{\cdot}F^-$, $TMB{\cdot}LiF$ (the contact ion pair), and $Li^+{\cdot}TMB{\cdot}F^-$ (the separated ion pair) using Hartree-Fock and density functional theory. Theory suggests that $F^-$ binds more strongly to TMB than $Li^+$ and the contact ion-pair binding ($TMB{\cdot}LiF$) is more stable than the separated ion-pair binding ($Li^+{\cdot}TMB{\cdot}F^-$).

• Journal of the Korean Society of Clothing and Textiles
• /
• v.14 no.1 s.33
• /
• pp.55-67
• /
• 1990

This is a review on the longitudinal transformation of the Japanese trousers, which is prepared as a pre-study for the comparative analysis of the forms of Korean and Japanese folk trousers. The special traits of the Japanese trousers are found to be as follows: 1) The Japanese trousers seem to have their root in the Northern-Asian or Schithian culture. 2) While the ancient forms of Japanese trousers, esp., those of the 8C before include the same types as Korean folk trousers, the Medieval and Recent era trousers quite differ and transform themselves into the unique Japanese type. 3) All Japanese trousers can largely be classified into formal and functional trousers. Formal trousers play important role as one of the ceremonial wardrobe and are treated rather as an outermost-wear than as an inner-wear. 4) The formal trousers have skirt-like features with much fullness as are presented in many deep pleats, long crotch lines and long sashes connected to the belt; the femine trousers even omit crotch line. 5) The principal forms of Japanese trousers consist of I, $\wedge,\;\wedge$; the $\lambda$ form of Korean and Chinese type had never existed. 6) Varieties of the composite type of Japanese-Western style appear among the trousers of recent time.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.19 no.9
• /
• pp.868-872
• /
• 2006

In this work, the effects of the corona treatment on surface properties of semiconducting silicone rubber were investigated in terms of contact angles, ATR-FTIR(Attenuated total reflection fourier transform infrared spectroscopy) and XPS(X-ray photoelectron spectroscopy). And the adhesive characteristics were studied by measuring the T-peel strengths. Based on chemical analysis, the surface modification can be mainly ascribed to the creation of chemically active functional groups such as C-O, C=O and C-OH on semiconducting silicone surface. This oxidized rubber layer is inorganic silica-like structure of Si bound with three to four oxygen atoms ($SiOx,\;x=3{\sim}4$. The Corona treatment produces an increase in joint strength that is maximum for 10 min treatment. However, due to brittle property of this oxidized layer, the highly oxidized layer from too much extended treatment could be act as a weak point, decreasing the adhesion strength.

• Journal of the Microelectronics and Packaging Society
• /
• v.27 no.2
• /
• pp.27-32
• /
• 2020

Robust and hydrophobic tetraethoxysilane (TEOS) based silica aerogel was synthesized by supercritical alcohol drying with surface modification using the phenyl based silica co-precursor (PTMS). The aerogels were synthesized by hydrolysis and polycondensation reaction in which TEOS and PTMS in methanol were reacted together in presence of oxalic acid and ammonium hydroxide as the catalysts. Supercritical alcohol dried PTMS/TEOS composite silica aerogel were examined for the hydrophobicity, chemical interaction, surface morphology, and textural characteristics. The hydrophobic silica-based aerogels were characterized by Fourier transform infrared spectroscopy to investigate the presence of functional groups and chemical bonds. The prepared silica demonstrates hydrophobicity (76°-149°), a high specific surface area (398 ㎡/g to 739 ㎡/g). The present investigation provides a simple approach to synthesize hydrophobic and thermally stable silica aerogels.

• ETRI Journal
• /
• v.27 no.4
• /
• pp.341-354
• /
• 2005

The adaptation of video according to the heterogeneous and dynamic resource constraints on networks and devices, as well as on user preferences, is a promising approach for universal access and consumption of video content. For optimal adaptation that satisfies the constraints while maximizing the utility that results from the adapted video, it is necessary to devise a systematic way of selecting an appropriate adaptation operation among multiple feasible choices. This paper presents a general conceptual framework that allows the formulation of various adaptations as constrained optimization problems by modeling the relations among feasible adaptation operations, constraints, and utilities. In particular, we present the feasibility of the framework by applying it to a use case of rate adaptation of MPEG-4 video with an explicit modeling of adaptation employing a combination of frame dropping and discrete cosine transform coefficient dropping, constraint, utility, and their mapping relations. Furthermore, we provide a description tool that describes the adaptation-constraint-utility relations as a functional form referred to as a utility function, which has been accepted as a part of the terminal and network quality of service tool in MPEG-21 Digital Item Adaptation (DIA).