• 한국신뢰성학회지:신뢰성응용연구
• /
• 제1권1호
• /
• pp.9-15
• /
• 2001

This paper modelled the fail-safe control logic through the frequency coding input and designed the 3-out of-6 self checker using the error detect coding method of information redundancy. In addition, this paper also peformed the reliability parallel numeric analysis regarding single module between fail-safe. control logic module and TMR(Triple Modular Redundancy), therefore, we achieved the result that the fail-safe control logic increases a functional reliability because of decreasing system waste cost and functional overhead rather than the existing hardware redundancy method.

• 항공우주기술
• /
• 제4권2호
• /
• pp.79-87
• /
• 2005

본 논문은 차세대 위성을 위한 탑재컴퓨터 구조, 설계에 대한 논문이다. 차세대 위성용 탑재 컴퓨터는 MCMERC32SC CPU를 사용하고 중앙 집중 처리 구조를 채택하고 있다. 이를 위해 PM32 Module, TC-TM Module, IO Module 및 Power Module로 구성되어 있다. 각 Module간의 통신은 IEEE-1355 DS/DE(SpaceWire) 통신 방식을 채택하였다. 간단한 cross-strap 방법을 사용함으로서 모듈들의 잉여성 관리와 재사용성 증가를 손쉽게 할 수 있도록 하고 있다.

• Kyungpook Mathematical Journal
• /
• 제43권4호
• /
• pp.481-487
• /
• 2003

In this paper we study the Hyers-Ulam-Rassias stability of Popoviciu's functional equation in Banach modules over a Banach algebra.

• 충청수학회지
• /
• 제17권1호
• /
• pp.29-45
• /
• 2004

We prove the Cauchy-Rassias stability of cyclic functional equations in Banach modules over a unital $C^*$-algebra.

• ETRI Journal
• /
• 제19권3호
• /
• pp.141-168
• /
• 1997

The base station (BS) in the CDMA Mobile System (CMS) connects calls through the radio interface and is designed to provide mobile subscribers with high quality service in spite of mobile subscribers motions. The BS consists of multiple base station transceiver subsystems (BTSs), a base station controller (BSC) and a base station manager (BSM). This paper is concerned with the BSC and the BSM. The BSC is located between the BTSs and the mobile switching center (MSC) connected with the public network, and to mobile subscribers via the BTSs. The BSM provides operator-interfaces per the BS and takes responsibility of operation and maintenance (OAM) of the BS. Design of the BSC is based on two module types: functional module and unit module. The functional module is used to support new services easily and the unit module to increase the system capacity economically. Both modular types are easily achieved by inserting the corresponding modules to the system. Particularly, in order to efficiently support the soft handover which is one of CDMA superior advantages, the BSC adopts a large high-speed Packet switch connecting up to 512 BTSs, and thus mobile subscribers can be provided with soft handover in high probability. The BSM is based on a commercial workstation to support OAM functions efficiently and guarantee high reliability of the functions. The BSM uses graphical user interface (GUI) for efficient OAM functions of the BS.

• Journal of Microbiology and Biotechnology
• /
• 제31권8호
• /
• pp.1183-1189
• /
• 2021

Autodisplay of a multimeric protein complex on a cell surface is limited by intrinsic factors such as the types and orientations of anchor modules. Moreover, improper folding of proteins to be displayed often hinders functional cell surface display. While overcoming these drawbacks, we ultimately extended the applicability of the autodisplay platform to the display of a protein complex. We designed and constructed a cell surface attachment (CSA) system that uses a non-covalent protein-protein interaction. We employed the high-affinity interaction mediated by an orthogonal cohesin-dockerin (Coh-Doc) pair from Archaeoglobus fulgidus to build the CSA system. Then, we validated the orthogonal Coh-Doc binding by attaching a monomeric red fluorescent protein to the cell surface. In addition, we evaluated the functional anchoring of proteins fused with the Doc module to the autodisplayed Coh module on the surface of Escherichia coli. The designed CSA system was applied to create a functional attachment of dimeric α-neoagarobiose hydrolase to the surface of E. coli cells.

• 한국경영과학회:학술대회논문집
• /
• 대한산업공학회/한국경영과학회 2002년도 춘계공동학술대회
• /
• pp.625-631
• /
• 2002

A module design aims to develop product architecture that consists physically detachable units such as module. To develop the system of module design, this paper suggests the methodology of part grouping, evaluation of modularization of a product for improving modularization. To determine modules, module concept is proposed to satisfy the objectives of a modular design. Therefore, there are functional, structural, and process modularizations in a modular concept. Module grouping can be accomplished by using an optimization model that maximizes the sum of the weighting. The present study proposes the p-median model and the direct clustering technique. The optimal clustering solution can be obtained by comparing two clustering techniques. To find the best solution among part groups, evaluation of modularization is performed based on the concept of module design. For the evaluation of modularization, evaluation criteria of modularization are used in the matrix table.

• 한국전기전자재료학회논문지
• /
• 제28권9호
• /
• pp.602-606
• /
• 2015

This paper presents a ZigBee wireless communication system for remote diagnosis in overhead distribution power lines. The system is divided in three parts in the functional aspect - a host computer module, a remote controller module and a diagnostic system module. The host computer module designed as USB interface transmits control signals and receive data measured by sensor. The remote controller module operates the diagnostic system. Diagnostic system module communicates with internal main controller and host computer USB. Multiple communication channel is adopted for simultaneous operations of several diagnostic system. Dedicated protocol for each module is developed. The system is designed with a focus on low cost and small size suitable for lightweight and small diagnostic system.

• 대한원격탐사학회지
• /
• 제24권5호
• /
• pp.417-425
• /
• 2008

An image-based atmospheric correction software ATC is implemented using MATLAB and SML (Spatial Modeler Language in ERDAS IMAGINE), and it was tested using Landsat TM/ETM+ data. This ATC has two main functional modules, which are composed of a semiautomatic type and an automatic type. The semi-automatic functional module includes the Julian day (JD), Earth-Sun distance (ESD), solar zenith angle (SZA) and path radiance (PR), which are programmed as individual small functions. For the automatic functional module, these parameters are computed by using the header file of Landsat TM/ETM+. Three atmospheric correction algorithms are included: The apparent reflectance model (AR), one-percent dark object subtraction technique (DOS), and cosine approximation model (COST). The ACT is efficient as well as easy to use in a system with MATLAB and SML.

• Journal of Microbiology and Biotechnology
• /
• 제13권4호
• /
• pp.613-619
• /
• 2003

The polyketide backbone of rifamycin B is assembled by the type I rifamycin polyketide synthase (PKS) encoded by the rifA-rifE genes. In order to produce novel analogs of rifamycin via engineering of the PKS genes, inactivation of the ${\beta}-ketoacyl:acyl$ carrier protein reductase (KR) domain in module 8 of rifD, by site-specific mutagenesis of the NADPH binding site, was attempted. Module 8 contains a nonfunctional dehydratase (DH) domain and a functional KR domain that is involved in the reduction of the ${\beta}-carbonyl$ group, resulting in the C-21 hydroxyl of rifamycin B. This mutant strain produced linear polyketides, from tetraketide to octaketide, which were also produced by a rifD-disruption mutant as a consequence of premature termination of the polyketide assembly. Another attempt to replace the DH domain of module 7, which has been considered nonfunctional, with a functional homolog derived from module 7 of rapamycin-producing PKS also resulted in the production of linear polyketides, including the heptaketide intermediate and its precursors. Premature release of the carbon chain assembly intermediates is an unusual property of the rifamycin PKS. that is not seen in other PKSs such as the erythromycin PKS.