• BMB Reports
• /
• 제52권4호
• /
• pp.227-238
• /
• 2019

GROWTH-REGULATING FACTORs (GRFs) are sequence-specific DNA-binding transcription factors that regulate various aspects of plant growth and development. GRF proteins interact with a transcription cofactor, GRF-INTERACTING FACTOR (GIF), to form a functional transcriptional complex. For its activities, the GRF-GIF duo requires the SWITCH2/SUCROSE NONFERMENTING2 chromatin remodeling complex. One of the most conspicuous roles of the duo is conferring the meristematic potential on the proliferative and formative cells during organogenesis. GRF expression is post-transcriptionally down-regulated by microRNA396 (miR396), thus constructing the GRF-GIF-miR396 module and fine-tuning the duo's action. Since the last comprehensive review articles were published over three years ago, many studies have added further insight into its action and elucidated new biological roles. The current review highlights recent advances in our understanding of how the GRF-GIF-miR396 module regulates plant growth and development. In addition, I revise the previous view on the evolutionary origin of the GRF gene family.

• 한국전기전자재료학회논문지
• /
• 제26권1호
• /
• pp.38-43
• /
• 2013

In this study we aims to examine the effects of $Co_3O_4$ and NiO doping on the defects and electrical properties in ZnO-$Bi_2O_3-Sb_2O_3$ (Sb/Bi=0.5) varistors. It seemed to form ${Zn_i}^{{\cdot}{\cdot}}$(0.20 eV) and ${V_o}^{\cdot}$(0.33 eV) as dominant defects in Co and Ni co-doped ZBS system, however only ${V_o}^{\cdot}$ appeared in Co- or Ni-doped ZBS. Even though the same defects it was different in capacitance (1.5~4.5 nF) and resistance ($0.3{\sim}9.5k{\Omega}$). The varistor characteristics were improved with Co and Co+Ni doping (non-linear coefficient, ${\alpha}$= 36 and 29, relatively) in ZBS. The various parameters ($N_d=1.43{\sim}2.33{\times}10^{17}cm^{-3}$, $N_t=1.40{\sim}2.28{\times}10^{12}cm^{-2}$, ${\Phi}b$=1.76~2.37 V, W= 98~118 nm) calculated from the C-V characteristics in our systems did not depend greatly on the type of dopant, which were in the range of a typical ZnO varistors. It should be derived a improved C-V equation carefully for more reliable parameters because the variation of the varistor capacitance as a function of the applied dc voltage is depend on the defect, frequency, and temperature.

• 대한전자공학회논문지SD
• /
• 제38권1호
• /
• pp.13-22
• /
• 2001

본 논문에서는 RF 회로의 3차원 적층 구조를 설계하고 RF 회로의 특성개선 효과를 살펴보았다. 3차원적 RF 회로를 구현하기 위하여 분할 설계 기준을 제안하였으며 이에 따라 RF 회로를 기능별, 동작 주파수별로 분할하여 구현하였다. 분할된 하위 모듈을 3차원으로 적층 연결할 수 있도록 PAA 입출력 단자구조를 이용하여 3차원 형태의 ITS RF 시스템을 제작하였다. 이에 따라 아날로그 신호와 디지털 신호, DC 전원이 혼재되어 있는 ITS(지능형 교통관제 시스템) 224MHz RF 모듈을 구성되는 회로를 특성 임피던스 정합과 시스템의 동작 안정도를 고려하여, 기능별로는 송신부, 수신부, PLL(Phase Locked Loop)부, 전원부로 분할하였고 주파수별로는 224MHz, 21.4MHz, 및 450kHz~DC의 주파수 대역으로 분할하여 설계하였다. RF 회로 모듈을 구현하는 과정에서 224MHz 대역에서 동작하는 송신부와 수신부 증폭회로는 설계치와 일치하는 18.9㏈, 23.9㏈의 이득, PLL부와 전원부는 위상 고정, 정전원 입력의 동작특성을 최대화시킬 수 있었다. 3차원 구조의 RF 모듈은 2차원의 평면구조의 단일 기판 구성방법과 비교하여 부피 및 배선길이에서 각각 76.9％, 28.4％를 감소시킨 $48cm^3$, 1.8cm를 나타내었고, 열적 성분인 최고 동작 온도특성은 37% 감소한 $41.8^{\circ}C$를 나타났다. PAA형 3차원 적층 구조는 고속 고밀도 저전력의 특성을 가지며, 저비용으로 구현할 수 있으며 RF 주파수 영역에서 각 모듈을 기능별, 주파수별로 모듈화해 제품의 기능을 가변적으로 변화시켜줄 수 있음을 알 수 있었고, RAA 형태의 입출력 단자로 연결함으로써 단일 양면 기판으로 구현되던 2차원적 RF 회로 모듈의 부피와 전기적 동작 특성과 열적 특성을 개선시킬 수 있었다.

• 한국전기전자재료학회논문지
• /
• 제25권11호
• /
• pp.878-885
• /
• 2012

In this study we aims to examine the co-doping effects of 1/3 mol% $Mn_3O_4+Co_3O_4$ (1:1) on the reaction, microstructure, and electrical properties such as the bulk defects and grain boundary properties of $ZnO-Bi_2O_3-Sb_2O_3$ (ZBS; Sb/Bi=0.5, 1.0, and 2.0) varistors. The sintering and electrical properties of Mn,Co-doped ZBS, ZBS(MCo) varistors were controlled by Sb/Bi ratio. Pyrochlore ($Zn_2Bi_3Sb_3O_{14}$) was decomposed and promoted densification at lower temperature on heating in Sb/Bi=1.0 by Mn rather than Co. Pyrochlore on cooling was reproduced in all systems however, spinel (${\alpha}$- or ${\beta}$-polymorph) did not formed in Sb/Bi=0.5. More homogeneous microstructure was obtained in $Sb/Bi{\geq}1.0$ In ZBS(MCo), the varistor characteristics were improved drastically (non-linear coefficient, ${\alpha}$=30~49), and seemed to form $Zn_i^{..}$(0.17 eV) and $V_o^{\bullet}$(0.33 eV) as dominant defects. From impedance and modulus spectroscopy (IS & MS), the grain boundaries have divided into two types, i.e. the one is tentatively assign to $ZnO/Bi_2O_3(Mn,Co)/ZnO$ (0.47 eV) and the other ZnO/ZnO (0.80~0.89 eV) homojunctions.

• Journal of Platform Technology
• /
• 제10권4호
• /
• pp.25-38
• /
• 2022

최근 국내에서는 무인항공기 간 상호 운용성을 확보하기 위해 STANAG-4586 기반의 한국형 무인항공기(UAV) 연동 프로토콜(K-4586)을 개발하고 있다. K-4586 기반 무인 항공기 체계(UAS)의 핵심 요소는 Core UAV Control System(CUCS), Vehicle Specific Module(VSM) 및 Data Link Interface(DLI), C4I 시스템으로 이루어져 있다. K-4586 기반 UAS에서 VSM과 CUCS는 UAV 연동을 위한 DLI 메시지 송수신 기능을 개별적으로 포함한다. Generator/Analyzer(G/A) 도구는 핵심 요소인 VSM 및 CUCS에 대한 프로토콜 적합성 검증을 위해 개발되는 도구이며, DLI 메시지 송수신 기능이 포함된 G/A 도구가 별도로 개발되어야 한다. K-4586 기반 핵심 응용프로그램(VSM, CUCS, DLI) 및 G/A 도구는 개발 주체 별로 독립적으로 개발될 수 있다. 만약 개발 주체 별로 DLI 메시지 모듈이 상이한 경우, 프로토콜 적합성 검증 범위 및 결과가 달라지며, 시스템 통합 시 문제가 발생할 수 있다. 본 연구에서는 K-4586 기반 핵심 응용프로그램과 프로토콜 적합성 검증 도구 개발에 필수적인 DLI 메시지 송수신 기능을 API 기반 공통 DLI 메시지 모듈로 구현하였다. 제안한 공통 DLI 메시지 모듈 적용 시, UAS 시스템 개발 기간 단축 및 비용 절감을 기대할 수 있으며, 프로토콜 적합성을 보장할 수 있다. 본 논문에서는 API 기반 공통 DLI 메시지 모듈에 대한 설계 및 구현 방법을 제시하고, 시험을 통한 기능 검증 결과를 기술한다.

• Molecules and Cells
• /
• 제27권3호
• /
• pp.271-277
• /
• 2009

Proteins interact with each other within a cell, and those interactions give rise to the biological function and dynamical behavior of cellular systems. Generally, the protein interactions are temporal, spatial, or condition dependent in a specific cell, where only a small part of interactions usually take place under certain conditions. Recently, although a large amount of protein interaction data have been collected by high-throughput technologies, the interactions are recorded or summarized under various or different conditions and therefore cannot be directly used to identify signaling pathways or active networks, which are believed to work in specific cells under specific conditions. However, protein interactions activated under specific conditions may give hints to the biological process underlying corresponding phenotypes. In particular, responsive functional modules consist of protein interactions activated under specific conditions can provide insight into the mechanism underlying biological systems, e.g. protein interaction subnetworks found for certain diseases rather than normal conditions may help to discover potential biomarkers. From computational viewpoint, identifying responsive functional modules can be formulated as an optimization problem. Therefore, efficient computational methods for extracting responsive functional modules are strongly demanded due to the NP-hard nature of such a combinatorial problem. In this review, we first report recent advances in development of computational methods for extracting responsive functional modules or active pathways from protein interaction network and microarray data. Then from computational aspect, we discuss remaining obstacles and perspectives for this attractive and challenging topic in the area of systems biology.

• 수산해양기술연구
• /
• 제40권2호
• /
• pp.126-131
• /
• 2004

On-machine automatic measuring software from 3-D solid modeler is generally applied to assess the functional performance of a final produce for computer numerical control (CNC) machine. Automatic measuring software may also be performed on individual components of CNC machine in which some functional aspect of the component must be examined and cannot be implicity determined by means of a mechanical inspection. The manufacturing specialist, combined with the appropriate software simulation, can not only create the commands to drive the virtual measuring but also can check for mistakes by viewing the computer graphics simulation of the tool cutting sequence.

• 전자공학회논문지A
• /
• 제32A권1호
• /
• pp.206-221
• /
• 1995

Metal-Metal Matrix(M$^{3}$) layout is a recently proposed layout style which uses minimum amount of poly wires for high speed operation. In this paper we propose a method of generating functional modules in M$^{3}$ layout style. In the proposed method the transistors and the input/output lines of the given circuit are first placed in M$^{3}$ layout style and then they are interconnected using two metal layers. We develop a new placement method by simulated annealing, and we modify the well known channel routing method for the interconnections. When we applied our method to several logic circuits, the area of the generated layout is smaller than the ones by the previously known method. Our results also compares favorably to the other layout styles like gate matrix layout.

• Kyungpook Mathematical Journal
• /
• 제48권4호
• /
• pp.529-543
• /
• 2008

It is shown that every almost linear mapping h : $A{\rightarrow}B$ of a unital PoissonC*-algebra A to a unital Poisson C*-algebra B is a Poisson C*-algebra homomorph when $h(2^nuy)\;=\;h(2^nu)h(y)$ or $h(3^nuy)\;=\;h(3^nu)h(y)$ for all $y\;\in\;A$, all unitary elements $u\;\in\;A$ and n = 0, 1, 2,$\codts$, and that every almost linear almost multiplicative mapping h : $A{\rightarrow}B$ is a Poisson C*-algebra homomorphism when h(2x) = 2h(x) or h(3x) = 3h(x for all $x\;\in\;A$. Here the numbers 2, 3 depend on the functional equations given in the almost linear mappings or in the almost linear almost multiplicative mappings. We prove the Cauchy-Rassias stability of Poisson C*-algebra homomorphisms in unital Poisson C*-algebras, and of homomorphisms in Poisson Banach modules over a unital Poisson C*-algebra.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2009년도 춘계학술대회 논문집
• /
• pp.74-77
• /
• 2009

Demands for high quality and productivity of precision mechanical parts are increasing greatly nowadays due to the rapid growth of information technologies and convergence industries. Therefore, core technologies for fabrication of precision mechanical parts are the fundamental issues, which are the precision machining, micro powder injection molding technologies, MR polishing, micro polymer processes, micro actuation modules and so on. These technologies are directly related to the mass production of high functional devices and machineries. Therefore, this study investigates the fabrication technologies of micro precision molds for advanced devices for possible commercialization in a near future.