• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.899-904
• /
• 2003

Tight integration of product design and process planning in the early design stage would make bigger impact as wider spectrum of design and manufacturing alternatives can be pursued and evaluated. Thus the development of systematic computer-based support for this integration is desirable. For this integration and process planning in the early design stage. the systematic method to synthesize shape of part from functional requirements is crucial. This research presents the methods of functional decomposition from overall function or product and synthesizing shape of part based on functional relations extracted from functional decomposition using planetary gear transmission system as an example.

• 한국지능정보시스템학회:학술대회논문집
• /
• 한국지능정보시스템학회 2001년도 The Pacific Aisan Confrence On Intelligent Systems 2001
• /
• pp.400-409
• /
• 2001

In conceptual design of engineering devices, a designer decomposes a required function into sub-functions, so-called functional decomposition, using a kind of functional knowledge representing achievement relations among functions. However, such knowledge about functionality of engineering devices is usually left implicit because each designer possesses it. Even if such knowledge is found in documents, it is often scattered around technical domains and lacks consistency. Aiming at capturing such functional knowledge explicitly and sharing it in design teams, we discuss its systematic description based on functional ontologies which provide common concepts for its consistent and generic description. We propose a new concept named “was of achievement” as a key concept for capturing such functional knowledge. Categorization of typical representations of the knowledge and its organization as is-a hierarchies are also discussed. The generic concepts representing functionality of a device in the functional knowledge are provided by the functional concept ontology, which makes the functional knowledge consistent and applicable to other domains. We also discuss development of a design supporting system using the systematized knowledge, called a functional was server. It helps human designers redesign an existing engineering device by providing a wide range of alternative ways of achievement of the required function in a manner suitable for the viewpoint of each designer and then facilitates innovative design.

• 한국군사과학기술학회지
• /
• 제2권2호
• /
• pp.52-60
• /
• 1999

By implementing the Systems Engineering process for the aircraft preliminary design, functional analysis study is performed, hence Functional Interface Data Flow(FIDF) and Functional Flow Block Diagram(FFBD) are generated. Based on FIDF and FFBD, allocable and non-allocable design/performance/RM＆S requirements are allocated to the appropriate levels. Weight and cost tracking and design margin management methodologies are studied and implemented for the balanced aircraft design.

• 한국의류산업학회지
• /
• 제13권1호
• /
• pp.1-6
• /
• 2011

Design patent is a type of industrial design right that is granted on the ornamental design of a functional item. We analyzed domestic design patents that were applied from 1965 until 2008, to the field of functional clothing. Since the year 2000 the number of design patents of functional clothing progressively increased. Design patents applied to the functional clothing field includes sport wear (47%), working clothes (34%), and leisure wear (19%). Design development of the sports wear from the latter half of 1990's has shown a continuously increasing tendency. The most patent applications belonged to the companies(51.4%), followed by individual applicants (46.6%), and the universities or laboratories had the least number of applications (2.0%). In case of working clothes or the leisure wear, the number of design applications focusing on the functional characteristic is higher than that of aesthetic characteristic, however, the number of design applications focusing on the aesthetic characteristic is higher in sportswear.

• 한국CDE학회논문집
• /
• 제12권2호
• /
• pp.118-125
• /
• 2007

Designer has recently required the supporting system to assist the design steps that are not simple and standardized. But, as it is often the case with many researches, the design support systems have the problems that the functional module's expansion and the flexible connection with the intelligent CAD System are insufficient. In this paper, we present a framework, EDSS Frame (Expanded Design Support System Frame) to improve in its problems. For the implementation of the EDSS Frame, we make the functional modules, the executable files and analyze a characteristic of the functional modules. Finally, we checked the cases that is generated. Through these works, we organize the algorithm of the running process in each cases. A user can make the process through the association of the functional modules. Also, we make the DLL files or algorithms for corresponding in change of the intelligent CAD System. User can make the additional file or algorithm for a new release of the intelligent CAD system. EDSS Frame can be used for the implementation of the design support system on a various fields, and assists a designer with the rapid reconstruction of the design support system through the continuous addition of the functional modules and the redefinition of the running process between the functional modules.

• 한국정밀공학회지
• /
• 제21권11호
• /
• pp.140-148
• /
• 2004

Tight integration of product design and process planning in the early design stage would make bigger impact as wider spectrum of design and manufacturing alternatives can be pursued and evaluated. Thus the development of systematic computer-based supporting for this integration if desirable. For this integration and process planning in the early design stage, the systematic method to synthesize shape of part from functional requirements is crucial. This research presents the methods of functional decomposition from overall function of product and synthesizing shape of part based on functional relations extracted from functional decomposition using planetary gear transmission system as an example.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2001년도 춘계학술대회 논문집
• /
• pp.622-626
• /
• 2001

Every design activity has a goal of satisfying a set of functional requirement. The commencement of a design, therefore, must have its foundation upon the identification of the functional requirements. Many of the design practices of the industrial examples can be categorized as design of small systems that are defined to have limited and fixed sets of functional requirements to be satisfied at all times. In the case of small systems it facilitates the construction of a knowledge-based system for a specific purpose to decompose the functional requirement and map ones in the lowest level into specific design features. When the number of design features is large, they need to be managed by groups. This paper suggests a grouping method for design process can be regarded as a series of selections of the predefined functional primitives according to the requirements and the preceding selections. An intelligent product design system for automatic transmission lever design is developed as an example.

• 한국실내디자인학회논문집
• /
• 제21권4호
• /
• pp.21-30
• /
• 2012

Interior space of modern society has a request for non-functional considerations as well as a need for function. French sociologist Jean Baudrillard defined this phenomenon as a dialectical relationship between the functional system and the non-functional system in his book "The System of Objects". The main goal of interior design is the pursuit of non-functional aspects which can satisfy emotional needs of human being without ignoring functional side. This means that designer should exceed the limitation of the functional system and overcome it by his own idea and method. Under this recognition, this paper tried to understand how Shiro Kuramata and Takashi Sugimoto accomplished the overcoming successfully. Sugimoto breaks through mechanical monotony introducing the non-functional objects into the functional system. His objects have power and form of the nature. They also shows traces of manufacture and labor. They works as media transferring old life and values. Sugimoto sometimes adopts the non-functional system such as collection, so it reveals time of collecting and arrangement of various objects. In contrast to Sugimoto, Kuramata erased the form of functional object and turned over the everydayness of the functional system. Instead, aesthetical phenomena substitutes form. Having doubts about the geometrical order of functional system, he opened a discourse for its meaning and limitation. However they have something in common which works as a blueprint for establishing subject's discourse. This discourse is comprised of their own memories of scenes. These subjects' discourse institute worlds through their design works based on each methodology. From the Heideggerian point of view, the worlds offer a foundation which allows the establishment of art in interior design.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2004년도 추계학술대회 논문집
• /
• pp.82-86
• /
• 2004

To cope with the challenge from global market characterized by frequent changes in requirements, manufacturing enterprise should be able to promptly adjust its manufacturing system accordingly. Therefore, it is important to provide manufacturing system designer with an appropriate methodology to (re-)design a manufacturing system subject to requirements change. Axiomatic design theory focuses design activity mainly on functional consideration rather than physical, and has been known as effective especially in the conceptual design phase. This paper introduces an approach to apply the axiomatic design principle to manufacturing system design. It is shown that a new design solution can be reached quickly by finding design parameters for the added or revised functional requirements and thus achieving a set of functional requirements as well as design parameters that satisfy the independence axiom. Some illustrative examples are also given.

• 복식
• /
• 제65권3호
• /
• pp.151-166
• /
• 2015

This research aims to study the needs of the trail runners as trail running has become a popular outdoor activity, and give suggestions for high functional outdoor menswear design that can satisfy the needs of the highly demanding taste of runners. The design development is as follows: 1) The design had to be made of lightweight material and be easily packable in all situations, and 2) we also considered the ergonomic and compact fit for activity, 3) the functional location of high functional fabric, 4) the reflective use and layering system giving a wide range of outdoor workout time and 5) the trend in 2016 S/S active sports and outdoor wear. Based on the above elements, the men's outdoor wear design has been developed for trail running in spring and summer. The design development includes a total of 7 items. The design focused on lightweight, availability of packaging, "comfortability" and freshness in activity, functional suitability of location of highly functional materials and the layering system to protect body temperature under the changing environment. In particular, the layering system was implemented to provide ventilation, and it was done in body parts that released the most body heat. Therefore, mesh materials were actively used on the side panel, sleeves and center of the back piece for necessary sweat emission without any problems and ventilation for trail running.