• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.2B
• /
• pp.240-249
• /
• 2004

For the effective IP-based service implementation in the wireless network environment, involvement of IP-related technologies in wireless networks is inevitable and globally unique IPv6 address allocation to the mobile node has become an important issue. In the 3GPP's address allocation mechanism, IPv6 address allocation procedure is performed by the GGSN, which is normally located far from the mobile nodes. This causes IPv6 address allocation time delay and traffics to be longer and increased in the core network, respectively. In this paper, we propose a new IPv6 address allocation mechanism that is performed by Node B located in RAN. The proposed IPv6 address allocation mechanism can provide IPv6 addresses to mobile nodes within a more reduced time than existing 3GPP's IPv6 address allocation mechanism, and co-operates with existing mechanism as an overlay model to improve reliability of wireless networks. And, for implementation of the proposed address allocation mechanism, it needs not to change the structure of current wireless networks except for the some functional addendum of Node B.

• Pediatric Gastroenterology, Hepatology & Nutrition
• /
• v.21 no.3
• /
• pp.196-202
• /
• 2018

Purpose: Treatment of chronic constipation and fecal impaction is usually outpatient and requires high or frequent doses of laxatives. However, there are children who fail outpatient treatments, sometimes repeatedly, and are ultimately hospitalized. We sought to compare the characteristics of the children who failed outpatient treatment and needed inpatient treatment vs those who achieved success with outpatient treatment, in an effort to identify attributes that might be associated with a higher likelihood towards hospitalization. Methods: In this retrospective cohort study, we reviewed the medical records of all patients aged 0 to 21 years, with chronic functional constipation and fecal impaction seen in the pediatric gastroenterology clinic over a period of 2 years. Results: Total of 188 patients met inclusion criteria. While 69.2% were successfully treated outpatient (referred to as the outpatient group), 30.9% failed outpatient treatment and were hospitalized (referred to as the inpatient group). The characteristics of the inpatient group including age at onset of $3.6{\pm}3.6years$ (p=0.02); black ethnicity (odds ratio [OR] 4.31, 95% confidence interval [95% CI] 2.04-9.09); p<0.001); prematurity (OR 2.39, 95% CI 1.09-5.26; p=0.02]; developmental delay (OR 2.20, 95% CI 1.12-4.33; p=0.02); overflow incontinence (OR 2.26, 95% CI 1.12-4.53, p=0.02); picky eating habits (OR 2.02, 95% CI 1.00-4.08; p=0.04); number of ROME III criteria met: median 4, interquartile range 3-5 (p=0.04) and $13{\pm}13.7$ constipation related prior encounters (p=0.001), were significantly different from the outpatient group. Conclusion: Identification of these characteristics may be helpful in anticipating challenges and potential barriers to effective outpatient treatment.

• Sleep Medicine and Psychophysiology
• /
• v.3 no.2
• /
• pp.65-76
• /
• 1996

Natural sleep pattern and its physiology in childhood are much different from those in adulthood. Several aspects of clinical evaluation for sleepiness in childhood are more difficult than in adulthood. These difficulties are due to several factors. First, excessive sleepiness in childhood do not always develop functional impairments. Second, objective test such as MSLT may not be reliable since it is hard to be certain that the child understand instructions. Third, sleepiness in children is often obscured by irritability. paradoxical hyperactivity, or behavioral disturbances. Anseguently, careful clinical evaluation is needed for the sleepy children. Usual causes of sleepiness in children are the disorders that induce insufficient sleep such as sleep apnea syndrome, schedule disorder, underlying medical and psychiatric disorder, and so forth. After excluding such factors, we can diagnose the hypersomnic disorders such as narcolepsy, Kleine-Levin syndrome, and idiopathic central nervous system hypersomnia. Among the variety of those causes of sleepiness, I reviewed the clinical difference of narcolepsy and obstructive sleep apnea syndrome in childhood compared with in adulthood. Recognition of the childhood narcolepsy is difficult because even severely sleepy children often do not develop pathognomic cataplexy and associated REM phenomena until much later. Since childhood narcolepsy give srise to many psychological, academical problem. Practicers should be concerned about these aspects. Childhood obstructive sleep apnea syndrome is different from adult obstructive sleep apnea syndrome too. Several aspects such as pathophysiology. clinical feature, diagnostic criteria, complication, management, and prognosis differ from those in the adult syndrome. An important feature of childhood obstructive sleep apnea syndrome is the variety of severe complications such as behavioral disorders, cognitive impairment, cardiovascular symptoms, developmental delay, and ever death. Fortunately, surgical interventions like adenotosillectomy or UPPP are more effective for Childhood OSA than adult form. CPAP is a "safe, effective, and well-tolerated" treatment modality too. So if early detection and proper management of childhood OSA were done, the severe complication would be prevented or ever cured.

• Journal of the Institute of Convergence Signal Processing
• /
• v.12 no.4
• /
• pp.322-332
• /
• 2011

In this paper, we introduce the 1st performance evaluation of VLBI Correlation Subsystem (VCS) main product, which is core system of Korea-Japan Joint VLBI Correlator (KJJVC). The main goal of the 1st performance evaluation of VCS main product is that the perfection of overall system will be enhanced after checking the unsolved part by performing the experiments towards various test items at the manufacturer before installation of field. The functional test was performed by including the overflow problem occurred in the FFT re-quantization module due to the insufficient of effective bit at the VCS trial product in this performance test of VCS main product. Through the performance test for VCS main product in the factory, the problem such as FFT re-quantization discovered at performance test of VCS trial product in 2008 was clearly solved and the important functions such as delay tracking, daly compensation, and frequency bining were added in this VCS main product. We also confirmed that the predicted correlation results (fringe) was obtained in the correlation test by using real astronomical observed data(wideband/narrow band).

• Molecules and Cells
• /
• v.39 no.9
• /
• pp.669-679
• /
• 2016

N-acetyl-D-glucosamine kinase (GlcNAc kinase or NAGK) primarily catalyzes phosphoryl transfer to GlcNAc during amino sugar metabolism. Recently, it was shown NAGK interacts with dynein light chain roadblock type 1 (DYNLRB1) and upregulates axo-dendritic growth, which is an enzyme activity-independent, non-canonical structural role. The authors examined the distributions of NAGK and NAGK-dynein complexes during the cell cycle in HEK293T cells. NAGK was expressed throughout different stages of cell division and immunocytochemistry (ICC) showed NAGK was localized at nuclear envelope, spindle microtubules (MTs), and kinetochores (KTs). A proximity ligation assay (PLA) for NAGK and DYNLRB1 revealed NAGK-dynein complex on nuclear envelopes in prophase cells and on chromosomes in metaphase cells. NAGK-DYNLRB1 PLA followed by Lis1/NudE1 immunostaining showed NAGK-dynein complexes were colocalized with Lis1 and NudE1 signals, and PLA for NAGK-Lis1 showed similar signal patterns, suggesting a functional link between NAGK and dynein-Lis1 complex. Subsequently, NAGK-dynein complexes were found in KTs and on nuclear membranes where KTs were marked with CENP-B ICC and nuclear membrane with lamin ICC. Furthermore, knockdown of NAGK by small hairpin (sh) RNA was found to delay cell division. These results indicate that the NAGK-dynein interaction with the involvements of Lis1 and NudE1 plays an important role in prophase nuclear envelope breakdown (NEB) and metaphase MT-KT attachment during eukaryotic cell division.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.71-71
• /
• 2012

As the critical dimensions of integrated circuits are scaled down, the line width and spacing between the metal interconnects are made smaller. The dielectric film used as insulation between the metal lines contributes to the resistance-capacitance (RC) time constant that governs the device speed. If the RC time delay, cross talk and lowering the power dissipation are to be reduced, the intermetal dielectric (IMD) films should have a low dielectric constant. The introduction of Cu and low-k dielectrics has incrementally improved the situation as compared to the conventional $Al/SiO_2$ technology by reducing both the resistivity and the capacitance between interconnects. Some of the potential candidate materials to be used as an ILD are organic and inorganic precursors such as hydrogensilsequioxane (HSQ), silsesquioxane (SSQ), methylsilsisequioxane (MSQ) and carbon doped silicon oxide (SiOCH), It has been shown that organic functional groups can dramatically decrease dielectric constant by increasing the free volume of films. Recently, various inorganic precursors have been used to prepare the SiOCH films. The k value of the material depends on the number of $CH_3$ groups built into the structure since they lower both polarity and density of the material by steric hindrance, which the replacement of Si-O bonds with Si-$CH_3$ (methyl group) bonds causes bulk porosity due to the formation of nano-sized voids within the silicon oxide matrix. In this talk, we will be introduce some properties of SiOC(-H) thin films deposited with the dimethyldimethoxysilane (DMDMS: $C_4H_{12}O_2Si$) and oxygen as precursors by using plasma-enhanced chemical vapor deposition with and without ultraviolet (UV) irradiation.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.23 no.6
• /
• pp.1526-1537
• /
• 1998

The split-screen function on the multipoint control unit(MCU) which is usually using processing method based on pixel domain has many problems for manipulating the video signal in real-time. Although the researches and the developements to cope ith such problems are processing, these have too complex architecture to implement and are limited to method for H.261 video signal. In this paper, we propose a new mechanism for split-screen that can actually apply to ISO/IEC MPEG video standard. The new method that is proposed in this paper do the processes in complete compression domain, thus it is suitable for the application of real-time multipoint multimedia communication service. By simple interpreting and manipulating the MPEG video element stream, the split-screen functional module can be implemented easily and the result of the procedures does not accompany image degradation at all. Finally, the complexity of implementation, the aspect for processing delay and the loss of image quality as compared to that resulting in the case of applying the previous split-screen method has been investigated. And it is confirmed that the proposed mechanism has a significant advantage as a split-screen method.

• Journal of the Korean Magnetics Society
• /
• v.25 no.1
• /
• pp.22-26
• /
• 2015

In this paper, a magneto-inductive wave generated in a chain of LC resonators fabricated with Ni-Zn ferrite cores and chip capacitors is presented. RF signal propagates to neighbor resonator one by one as a consequence of the magnetical coupling between two resonators in the device. The magnetical coupling is due to the mutual inductances along the chain of resonators. So, the signal amplitude (${\approx}$ coupling intensity) is dependent of the mutual inductance which can be adjusted by applied magnetic field. In order to demonstrate the device, some experiments have been carried out systemically. The transmission characteristics of a magneto-inductive wave could be controlled by applied external magnetic field. The device composed of 5 resonators; the center frequencies were estimated to be 32 MHz and 38 MHz with the external magnetic flux density of 75 Oe and 222 Oe, respectively. We expect that the reported results could open a promising way to a high variety of applications in one- and two-dimensional functional devices, such as transducers, delay lines, power dividers and couplers.

• The Journal of Society for e-Business Studies
• /
• v.4 no.1
• /
• pp.87-101
• /
• 1999

To operate the automatic devices of manufacturing process more effectively and to solve the needs of the resource sharing, network technology is applied to the control devices located in common manufacturing zone and operated by connecting them. In this paper, functional standard of the network layers are set as physical and data link layer of IEEE 802.2, 802.4, and VMD application layer and ISO-CIM reference model. Then, they are divided as minimized architecture, designed as group objects which perform group management and service objects which organizes and operates the group. For the stability in this network, this paper measures the variation of data packet length and node number and analyzes the variated value of the waiting time for the network operation. For the method of the analysis, non-exhausted service method are selected, and the arrival rates of the each data packet to the nodes that are assumed to form a Poission distribution. Then, queue model is set as M/G/1, and the analysis equation for waiting time is found. For the evalution of the performance, the length of the data packet varies from 10 bytes to 100 bytes in the operation of the group management network, the variation of the wating time is less than 10 msec. Since the waiting time in this case is less than 10 msec, response time is fast enough. Furthermore, to evaluate the real time processing of the group management network, it shows if the number of nodes is less than 40, and the average arrival time is less than 40 packet/sec, it can perform stable operation even taking the overhead such as software delay time, indicated packet service, and transmissin safety margin.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.18 no.1
• /
• pp.61-68
• /
• 1996

In Fibrous dysplasia(FD) of the jaws, the majority of cases can await the cessation of growth before surgical intervention, and it seems prudent to delay surgery whenever possible until growth has ceased. In craniofacial FD, however, the dangers of dystopia, dystopia and loss of vision may require early surgery to prevent or control cranio-orbital complications. Delaying surgery in those circumstances may be significantly detrimental to such patients. Conservative surgical management of FD is widely practised and we advocate an extension to this conservative treatment by combining surgical recontouring with appropriate osteotomies if indicated, to achieve an optimal esthetic and functional results in craniofacial FD. One case will be presented to illustrate the feasiblility of such combined treatment, to report the uneventful healing of osteotomies in the FD of the jaws, and to demonstrate the use of titanium miniplate fixation in dysplastic bone. The other case had expansile disease of the left facial and fronto-temporal bones and osteolytic change left mandible. This patient complained of severe spontaneous bleeding of left mandibular premolar area and it was suspected as central hemangioma of the left mandible and craniofacial FD. Angiogram disclosed generalized dilation of the external carotid artery and its branches, especially terminal branches of the left facial and inferior alveolar arteries. But no specific abnormalities, such as A-V shunt, venous lake, or early venous drainage, was seen. So it was diagnosed craniofacial FD with hypercellularity and generalized bony recontouring was performed via coronal and transoral approaches.