• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.7 no.1
• /
• pp.75-83
• /
• 2008

In this paper, we propose an efficient algorithm that assigns single temporary IPv4 address and port number to improve efficiency of IPv4 address that is allocated in DSTM service. And, we have analyzed the elementary functions for DSTM and have designed the functional modules. Also, we have implemented the DTI interface for encapsulation and decapsulation of IPv6 packets. The performance analysis and comparison are investigated whether the appropriate interworking service is possible or not. Our observation results show that the performance of IPv4 over IPv6 tunneling is suitable to DSTM service due to the reduction of delay by eliminating checksum calculations in the header of IPv6 tunneling.

• Journal of the Korean Institute of Telematics and Electronics C
• /
• v.34C no.2
• /
• pp.29-37
• /
• 1997

A new algorithm and parallel architecture for high-speed complex number multiplication is presented, and a prototype chip based on the proposed approach is designed. By employing redundant binary (RB) arithmetic, an N-bit complex number multiplication is simplified to two RB multiplications (i.e., an addition of N RB partial products), which are responsible for real and imaginary parts, respectively. Also, and efficient RB encoding scheme proposed in this paper enables to generate RB partial products without additional hardware and delay overheads compared with binary partial product generation. The proposed approach leads to a highly parallel architecture with regularity and modularity. As a results, it results in much simpler realization and higher performance than the classical method based on real multipliers and adders. As a test vehicle, a prototype 8-b complex number multiplier core has been fabricated using $0.8\mu\textrm{m}$ CMOS technology. It contains 11,500 transistors on the area of about $1.05 \times 1.34 textrm{mm}^2$. The functional and speed test results show that it can safely operate with 200 MHz clock at $V_{DD}=2.5 V$, and consumes about 90mW.

• ETRI Journal
• /
• v.38 no.5
• /
• pp.847-857
• /
• 2016

Broadcasting services such as multi/single channel HDTV and 3DTV/2DTV use a multi-channel encoder that changes the bitrate and composition of the video service depending on the time. However, this type of multi-channel encoder could cause a longer latency owing to the variable bitrate and relatively bigger size of the buffers, which results in the same delay as in 3DTV even for a conventional DTV service. On the other hand, systems built based on separate encoders, each of which is optimized for the target service, might not have such latency problems. Nevertheless, there might be a distortion problem in the image and sound at the time of a switchover between two encoders with different output bitrates and group of picture structures. This paper proposes a system that can realize a seamless video service conversion using two different video encoders optimized for each video service. An overall functional description of the video service change control server, which is a main control block for the proposed system, is also provided. The experiment results confirm the seamless switchover and reduced broadcasting latency of DTV services compared with a broadcasting system composed of a multi-channel encoder system.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.49 no.7
• /
• pp.581-588
• /
• 2021

This paper deals with a beam scheduling method in fighter interleaving mode. Not only the priority of tasks but also operational requirements that air-to-ground and air-to-air search tasks should be executed alternatively are established to maximize high-quality of situational awareness. We propose a real-time heuristic beam scheduling method that is advanced from WMDD to satisfies the requirements. The proposed scheduling method is implemented in a simulation environment resembling the task processing mechanism and measurement model of a radar. Performance improvement in terms of task delay time is observed.

• Current Optics and Photonics
• /
• v.4 no.6
• /
• pp.477-482
• /
• 2020

Recently, one of the authors has been reported an optically tunable fiber Bragg grating (FBG) with a photomechanical polymer. It was based on a typical FBG with a downsized diameter of 60 ㎛, coated with azobenzene-containing polymer material. Azobenzene is a well-known reversibly photomechanical stretchable material under ultraviolet (UV) light. The small part of the functional-coating region on the FBG absorbed UV light, which pulled the UV-exposed part of the grating. It was selectable as tunable FBG or tunable chirped FBG, by adjusting the position of UV exposure on the grating. As proof of concept for the tunable FBG device, the characteristics just including UV-induced center-wavelength shift and spectral-width changes of the device were reported. In this paper, we report for the first time that the microactuator makes it possible to control the spectral shape of the FBG reflection, according to the specifications (shape and intensity) of the UV beam that reaches the FBG coated with the azobenzene polymer. In addition, we provide the group-delay profiles for the chirped FBG, so that the sign of its dispersion (normal or anomalous) can be tailored by simply selecting the moving direction of the UV light's displacement in the experiment.

• Journal of Korea Multimedia Society
• /
• v.24 no.3
• /
• pp.494-507
• /
• 2021

As service design becomes more common, various user research methods and tools such as cultural probes and contextual inquiry are being used to grasp the user's experience and needs. These methodologies have the advantage of being able to derive various insights through direct observation and investigation, but have disadvantages in that problems such as time and space constraints, cost occurrence, and delay in the service development process may occur. In addition, it is difficult to conduct actual observations, face-to-face investigations, and interviews due to COVID-19, which has recently spread rapidly around the world. Accordingly, prior to the digitization of cultural probes, I would like to suggest the direction of digital tools. First, after grasping the concept of service design and user research through literature research, the necessity of user research in service design was confirmed. After that, the necessity of digitalizing user research was confirmed by extracting functional elements that could be understood and digitalized about the cultural probes methodology, and analyzing previous studies using existing mobile-based survey techniques. Finally, we confirmed the direction of digital tools through user interviews through cultural probes.

• Journal of the Korean Society for Railway
• /
• v.19 no.4
• /
• pp.456-467
• /
• 2016

Wireless Access in Vehicular Environments (WAVE) communication technology, which provides vehicleto-vehicle and vehicle-to-infrastructure communication and offers safe and convenient service, has been developed for application to an Intelligent Transport System (ITS). This paper provides field test results on a study of the feasibility of WAVE technology application to railway communication systems. A test railway communication system based on WAVE technology has been built along the Daebul line and a newly developed EMU. Field tests have been carried out according to the communication function requirements for LTE - R. The test results show that the railway communication system based on WAVE technology meets the functional requirements: maximum transmission length is 730m, maximum transfer delay is 5.69ms, and maximum interruption time is 1.36s; other tests including throughput test, video data transmission test, VoIP data test, and channel switching test also produced results that meets the functional requirements. These results suggest that WAVE technology can be applied to the railway communication system, enabling Vehicle-to-Wayside communication.

• Childhood Kidney Diseases
• /
• v.4 no.1
• /
• pp.69-76
• /
• 2000

Purpose: The Pathogenesis of primary noctllrnal enuresis(PNE) is still controversial. Genetic factor and maturational delay of micturition reflex including arousal disorder, lack of nocturnal Arginine Vasopressin(AVP) release and functional bladder capacity have been suggested. We analyzed the risk factors of PNE. Methods: Fifty five children with PNE (20 enuretics diagnosed at school physical examination of the first grade students at Mok-Dong Elementary School and 35 enuretics (Age 6-7 year) diagnosed at Ewha Womans University Mok Dong Hospital) and 221 control students without PNE at school physical examination were included. Genetic, stress and developmental factors, arousability, water intake, urine volume, maximun voiding volume and daytime voiding dysfunction were compared. Results: 1) There was no significant difference between PNE and control group in sex ratio, birth order, percentage of working mothers, parental and child personality, age to start walking, school record and duration of sleep. 2) Family history in the PNE group was significantly higher than control group ($20.0\%\;vs\;2.7\%$)(P<0.05). 3) The difficulty in arousal in the PNE group was significantly more common than the control group ($70.9\%\;vs\;54.3\%$)(P<0.05). 4) Nocturnal water intake in the PNE group was significantly greater than the control group ($330{\pm}158.2\;mL\;vs\;235{\pm}129.5\;mL$). Nocturnal urine volume in the PNE group was significantly greater than the control group ( $390{\pm}61.5\;mL\;vs\;140{\pm}43.2\;mL$)(P<0.05). Daily water intake and daily urine volume did not significantly differ between the two groups. 5) Maximum urine volume per void in the PNE group was significantly lower than the control group ($107{\pm}35.9\;mL\;vs\;236{\pm}41.3\;mL$). Daytime voiding dysfunction in the PNE group was significantly more common than the control group ($80.0\%\;vs\;57.9\%$). The voiding frequency in the PNE group was significantly greater than the control group ($7.0{\pm}3.6\;vs\;5.4{\pm}1.6$)(P<0.05). Conclusion: In addition to genetic factors and maturational delay of micturition reflex (difficulty in arousal, nocturnal polyuria and decreased functional bladder capacity) nocturnal polydypsia was found to be the important risk factors fur PNE. So nocturnal fluid restriction should be encouraged as the first-line management of PNE.

• Journal of Life Science
• /
• v.23 no.12
• /
• pp.1460-1470
• /
• 2013

To examine whether miscellaneous cereal grains have an antithrombotic effect, we investigated the anticoagulant activity of 80% ethanol extracts from eleven selected miscellaneous cereal grains. The 80% ethanol extract of hwanggeumchal sorghum (Sorghum bicolor) showed the highest anticoagulant activity, followed by that of green foxtail millet grains, in terms of thrombin time (TT). When the ethanol extract of hwanggeumchal sorghum was sequentially fractionated with n-hexane, methylene chloride, ethyl acetate, and n-butanol, the majority of the TT-inhibitory activity was detected in the hexane and methylene chloride fractions. Whereas aspirin (final conc. 480 ${\mu}g/ml$) prolonged TT by 2-fold, the ethanol extract, hexane fraction, and methylene chloride fraction in the same dose prolonged TT by 2.2-fold, 2.9-fold, and 2.5-fold, respectively. The ethanol extract of hwanggeumchal sorghum could delay activated partial thromboplastin time (APTT) as well as prothrombin time (PT). Although the APTT-inhibitory activity of the ethanol extract was mainly partitioned into the hexane and methylene chloride fractions, the PT-inhibitory activity of the ethanol extract was solely partitioned into the hexane fraction. The APTT- and PT-inhibitory activities of these organic solvent fractions were more potent than those of the control warfarin (final conc. 3.13 mg/ml). The TT-inhibitory activity of the ethanol extract was heat-stable and acid-stable. The ethanol extract, hexane fraction, and methylene chloride fraction of hwanggeumchal sorghum appeared to possess a direct fibrinolytic activity toward fibrin clotting. These results show that hwanggeumchal sorghum can exert anticoagulant and fibrinolytic effects and, thus, have the potential to be applicable as antithrombotic dietary sources.

• International Commerce and Information Review
• /
• v.1 no.2
• /
• pp.145-165
• /
• 1999

With the rapid spreading of the internet that is based on the development of the information network system, the paradigms of "internet round" and "cyber" are given much weight in the notion of "market." Especially, the cyber shopping for the individuals is developing rapidly creating the new life style, and also in the domestic economy the cases of building and running the cyber shopping malls are increasing. The purpose of this study is to analyse the customers' shopping styles that can be shown when the customers purchase physical goods or digital goods at the B to C EC and find the way to activate the shopping malls by controlling the factors which influence the trade. The result of the study is as follows: First, to analyse the acting style of the customers at the B to C EC, it is searched whether there is any relationship between the purchasing goods, which are divided into physical goods and digital goods. There was a cross analysis between the first factor of the five factors of the purchase decision or delay at the B to C EC and the goods type. The result of the analysis is that the purchase decision factor is different according as what type of goods is purchased. On the other hand, the purchase delay factor has no relation with the goods type. Second, the fact that the cyber shopping activities are quite different according to sexuality, age, academic background, or occupation suggests that these factors are very important to the strategy for the market-specification of the B to C EC marketing construction. The result shown in this study is sure to give great help to figure out the improvement strategies and the market-specialization strategies to accelerate the B to C EC marketing. On the side of the strategies for the improvement of the goods services, more attention should be given to the functional side for the improvement of the reliability of the goods service such as capacity, technique, and quality. And the activities of the customers are so different according to the vital statistics that the way to cope with the changeability properly should be considered.