• Asia pacific journal of information systems
• /
• v.20 no.3
• /
• pp.139-166
• /
• 2010

The supply chain management (SCM) systems have emerged as strong managerial tools for manufacturing firms in enhancing competitive strength. Despite of large investments in the SCM systems, many companies are not fully realizing the promised benefits from the systems. A review of literature on adoption, implementation and success factor of IOS (inter-organization systems), EDI (electronic data interchange) systems, shows that this issue has been examined from multiple theoretic perspectives. And many researchers have attempted to identify the factors which influence the success of system implementation. However, the existing studies have two drawbacks in revealing the determinants of systems implementation success. First, previous researches raise questions as to the appropriateness of research subjects selected. Most SCM systems are operating in the form of private industrial networks, where the participants of the systems consist of two distinct groups: focus companies and vendors. The focus companies are the primary actors in developing and operating the systems, while vendors are passive participants which are connected to the system in order to supply raw materials and parts to the focus companies. Under the circumstance, there are three ways in selecting the research subjects; focus companies only, vendors only, or two parties grouped together. It is hard to find researches that use the focus companies exclusively as the subjects probably due to the insufficient sample size for statistic analysis. Most researches have been conducted using the data collected from both groups. We argue that the SCM success factors cannot be correctly indentified in this case. The focus companies and the vendors are in different positions in many areas regarding the system implementation: firm size, managerial resources, bargaining power, organizational maturity, and etc. There are no obvious reasons to believe that the success factors of the two groups are identical. Grouping the two groups also raises questions on measuring the system success. The benefits from utilizing the systems may not be commonly distributed to the two groups. One group's benefits might be realized at the expenses of the other group considering the situation where vendors participating in SCM systems are under continuous pressures from the focus companies with respect to prices, quality, and delivery time. Therefore, by combining the system outcomes of both groups we cannot measure the system benefits obtained by each group correctly. Second, the measures of system success adopted in the previous researches have shortcoming in measuring the SCM success. User satisfaction, system utilization, and user attitudes toward the systems are most commonly used success measures in the existing studies. These measures have been developed as proxy variables in the studies of decision support systems (DSS) where the contribution of the systems to the organization performance is very difficult to measure. Unlike the DSS, the SCM systems have more specific goals, such as cost saving, inventory reduction, quality improvement, rapid time, and higher customer service. We maintain that more specific measures can be developed instead of proxy variables in order to measure the system benefits correctly. The purpose of this study is to find the determinants of SCM systems success in the perspective of vendor companies. In developing the research model, we have focused on selecting the success factors appropriate for the vendors through reviewing past researches and on developing more accurate success measures. The variables can be classified into following: technological, organizational, and environmental factors on the basis of TOE (Technology-Organization-Environment) framework. The model consists of three independent variables (competition intensity, top management support, and information system maturity), one mediating variable (collaboration), one moderating variable (government support), and a dependent variable (system success). The systems success measures have been developed to reflect the operational benefits of the SCM systems; improvement in planning and analysis capabilities, faster throughput, cost reduction, task integration, and improved product and customer service. The model has been validated using the survey data collected from 122 vendors participating in the SCM systems in Korea. To test for mediation, one should estimate the hierarchical regression analysis on the collaboration. And moderating effect analysis should estimate the moderated multiple regression, examines the effect of the government support. The result shows that information system maturity and top management support are the most important determinants of SCM system success. Supply chain technologies that standardize data formats and enhance information sharing may be adopted by supply chain leader organization because of the influence of focal company in the private industrial networks in order to streamline transactions and improve inter-organization communication. Specially, the need to develop and sustain an information system maturity will provide the focus and purpose to successfully overcome information system obstacles and resistance to innovation diffusion within the supply chain network organization. The support of top management will help focus efforts toward the realization of inter-organizational benefits and lend credibility to functional managers responsible for its implementation. The active involvement, vision, and direction of high level executives provide the impetus needed to sustain the implementation of SCM. The quality of collaboration relationships also is positively related to outcome variable. Collaboration variable is found to have a mediation effect between on influencing factors and implementation success. Higher levels of inter-organizational collaboration behaviors such as shared planning and flexibility in coordinating activities were found to be strongly linked to the vendors trust in the supply chain network. Government support moderates the effect of the IS maturity, competitive intensity, top management support on collaboration and implementation success of SCM. In general, the vendor companies face substantially greater risks in SCM implementation than the larger companies do because of severe constraints on financial and human resources and limited education on SCM systems. Besides resources, Vendors generally lack computer experience and do not have sufficient internal SCM expertise. For these reasons, government supports may establish requirements for firms doing business with the government or provide incentives to adopt, implementation SCM or practices. Government support provides significant improvements in implementation success of SCM when IS maturity, competitive intensity, top management support and collaboration are low. The environmental characteristic of competition intensity has no direct effect on vendor perspective of SCM system success. But, vendors facing above average competition intensity will have a greater need for changing technology. This suggests that companies trying to implement SCM systems should set up compatible supply chain networks and a high-quality collaboration relationship for implementation and performance.

• Journal of the Korean Chemical Society
• /
• v.40 no.6
• /
• pp.427-435
• /
• 1996

The structures of fully dehydrated $Ca^{2+}$- and $Cs^+$-exchanged zeolite X, $Ca_{35}Cs_{22}Si_{100}Al_{92}O_{384}$($Ca_{35}Cs_{22}$-X; a=25.071(1) $\AA)$ and $Ca_{29}Cs_{34}Si_{100}Al_{92}O_{384}$($Ca_{29}Cs_{34}$-X; a=24.949(1) $\AA)$, have been determined by single-crystal X-ray diffraction methods in the cubic space group Fd3 at $21(1)^{\circ}C.$ Their structures were refined to the final error indices $R_1$=0.051 and $R_2$=0.044 with 322 reflections for $Ca_{35}Cs_{22}$-X, and $R_1$=0.058 and $R_2$=0.055 with 260 reflections for $Ca_{29}Cs_{34}$-X; $I>3\sigma(I).$ In both structures, $Ca^{2+}$ and $Cs^+$ ions are located at five different crystallographic sites. In dehydrated $Ca_{35}Cs_{22}$-X, sixteen $Ca^{2+}$ ions fill site I, at the centers of the double 6-rings(Ca-O=2.41(1) $\AA$ and $O-Ca-O=93.4(3)^{\circ}).$ Another nineteen $Ca^{2+}$ ions occupy site II (Ca-O=2.29(1) $\AA$, O-Ca-O=118.7(4)') and ten $Cs^+$ ions occupy site II opposite single six-rings in the supercage; each is $1.95\AA$ from the plane of three oxygens (Cs-O=2.99(1) and $O-Cs-O=82.3(3)^{\circ}).$ About three $Cs^+$ ions are found at site II', 2.27 $\AA$ into sodalite cavity from their three-oxygen plane (Cs-O=3.23(1) $\AA$ and $O-Cs-O=75.2(3)^{\circ}).$ The remaining nine $Cs^+$ ions are statistically distributed over site Ⅲ, a 48-fold equipoint in the supercages on twofold axes (Cs-O=3.25(1) $\AA$ and Cs-O=3.49(1) $\AA).$ In dehydrated $Ca_{29}Cs_{34}$-X, sixteen $Ca^{2+}$ ions fill site I(Ca-O=2.38(1) $\AA$ and $O-Ca-O=94.1(4)^{\circ})$ and thirteen $Ca^{2+}$ ions occupy site II (Ca-O=2.32(2) $\AA$, $O-Ca-O=119.7(6)^{\circ}).$ Another twelve $Cs^+$ ions occupy site II; each is $1.93\AA$ from the plane of three oxygens (Cs-O=3.02(1) and $O-Cs-O=83.1(4)^{\circ})$ and seven $Cs^+$ ions occupy site II'; each is $2.22\AA$ into sodalite cavity from their three-oxygen plane (Cs-O=3.21(2) and $O-Cs-O=77.2(4)^{\circ}).$ The remaining sixteen $Cs^+$ ions are found at III site in the supercage (Cs-O=3.11(1) $\AA$ and Cs-O=3.46(2) $\AA).$ It appears that $Ca^{2+}$ ions prefer sites I and II in that order, and that $Cs^+$ ions occupy the remaining sites, except that they are too large to be stable at site I.

• Journal of Intelligence and Information Systems
• /
• v.24 no.4
• /
• pp.137-154
• /
• 2018

Animal infectious diseases, such as avian influenza and foot and mouth disease, occur almost every year and cause huge economic and social damage to the country. In order to prevent this, the anti-quarantine authorities have tried various human and material endeavors, but the infectious diseases have continued to occur. Avian influenza is known to be developed in 1878 and it rose as a national issue due to its high lethality. Food and mouth disease is considered as most critical animal infectious disease internationally. In a nation where this disease has not been spread, food and mouth disease is recognized as economic disease or political disease because it restricts international trade by making it complex to import processed and non-processed live stock, and also quarantine is costly. In a society where whole nation is connected by zone of life, there is no way to prevent the spread of infectious disease fully. Hence, there is a need to be aware of occurrence of the disease and to take action before it is distributed. Epidemiological investigation on definite diagnosis target is implemented and measures are taken to prevent the spread of disease according to the investigation results, simultaneously with the confirmation of both human infectious disease and animal infectious disease. The foundation of epidemiological investigation is figuring out to where one has been, and whom he or she has met. In a data perspective, this can be defined as an action taken to predict the cause of disease outbreak, outbreak location, and future infection, by collecting and analyzing geographic data and relation data. Recently, an attempt has been made to develop a prediction model of infectious disease by using Big Data and deep learning technology, but there is no active research on model building studies and case reports. KT and the Ministry of Science and ICT have been carrying out big data projects since 2014 as part of national R &D projects to analyze and predict the route of livestock related vehicles. To prevent animal infectious diseases, the researchers first developed a prediction model based on a regression analysis using vehicle movement data. After that, more accurate prediction model was constructed using machine learning algorithms such as Logistic Regression, Lasso, Support Vector Machine and Random Forest. In particular, the prediction model for 2017 added the risk of diffusion to the facilities, and the performance of the model was improved by considering the hyper-parameters of the modeling in various ways. Confusion Matrix and ROC Curve show that the model constructed in 2017 is superior to the machine learning model. The difference between the2016 model and the 2017 model is that visiting information on facilities such as feed factory and slaughter house, and information on bird livestock, which was limited to chicken and duck but now expanded to goose and quail, has been used for analysis in the later model. In addition, an explanation of the results was added to help the authorities in making decisions and to establish a basis for persuading stakeholders in 2017. This study reports an animal infectious disease prevention system which is constructed on the basis of hazardous vehicle movement, farm and environment Big Data. The significance of this study is that it describes the evolution process of the prediction model using Big Data which is used in the field and the model is expected to be more complete if the form of viruses is put into consideration. This will contribute to data utilization and analysis model development in related field. In addition, we expect that the system constructed in this study will provide more preventive and effective prevention.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.14
• /
• pp.1-40
• /
• 1973

There is a general tendency to increase nitrogen level in rice production to insure an increased yield. On the other hand, percentage of ripened grains is getting decreased with such an increased fertilizer level. Decreasing of the percentage is one of the important yield limiting factors. Especially the newly developed rice variety, 'Tongil' is characterized by a relatively low percentage of ripened grains as compared with the other leading varieties. Therefore, these studies were aimed to finding out of some measures for the improvement of ripening in rice. The studies had been carried out in the field and in the phytotron during the period of three years from 1970 to 1972 at the Crop Experiment Station in Suwon. The results obtained from the experiments could be summarized as follows: 1. The spikelet of Tongil was longer in length, more narrow in width, thinner in thickness, smaller in the volume of grains and lighter in grain weight than those of Jinheung. The specific gravity of grain was closely correlated with grain weight and the relationship with thickness, width and length was getting smaller in Jinheung. On the other hand, Tongil showed a different pattern from Jinheung. The relationship of the specific gravity with grain weight was the greatest and followed by that with the width, thickness and length, in order. 2. The distribution of grain weight selected by specific gravity was different from one variety to another. Most of grains of Jinheung were distributed over the specific gravity of 1.12 with its peak at 1.18, but many of grains of Tongil were distributed below 1.12 with its peak at 1.16. The brown/rough rice ratio was sharply declined below the specific gravity of 1.06 in Jinheung, but that of Tongil was not declined from the 1.20 to the 0.96. Accordingly, it seemed to be unfair to make the specific gravity criterion for ripened grains at 1.06 in the Tongil variety. 3. The increasing tendency of grain weight after flowering was different depending on varieties. Generally speaking, rice varieties originated from cold area showed a slow grain weight increase while Tongil was rapid except at lower temperature in late ripening stage. 4. In the late-tillered culms or weak culms, the number of spikelets was small and the percentage of ripened grains was low. Tongil produced more late-tillered culms and had a longer flowering duration especially at lower temperature, resulting in a lower percentage of ripened grains. 5. The leaf blade of Tongil was short, broad and errect, having light receiving status for photosynthesis was better. The photosynthetic activity of Tongil per unit leaf area was higher than that of Jinheung at higher temperature, but lower at lower temperature. 6. Tongil was highly resistant to lodging because of short culm length, and thick lower-internodes. Before flowering, Tongil had a relatively higher amount of sugars, phosphate, silicate, calcium, manganese and magnesium. 7. The number of spikelets of Tongil was much more than that of Jinheung. The negative correlation was observed between the number of spikelets and percentage of ripened grains in Jinheung, but no correlation was found in Tongil grown at higher temperature. Therefore, grain yield was increased with increased number of spikelets in Tongil. Anthesis was not occurred below 21$^{\circ}C$ in Tongil, so sterile spikelets were increased at lower temperature during flowering stage. 8. The root distribution of Jinheung was deeper than that of Tongil. The root activity of Tongil evaluated by $\alpha$-naphthylamine oxidation method, was higher than that of Jinheung at higher temperature, but lower at lower temperature. It is seemed to be related with discoloration of leaf blades. 9. Tongil had a better light receiving status for photosynthesis and a better productive structure with balance between photosynthesis and respiration, so it is seemed that tongil has more ideal plant type for getting of a higher grain yield as compared with Jinheung. 10. Solar radiation during the 10 days before to 30 days after flowering seemed enough for ripening in suwon, but the air temperature dropped down below 22$^{\circ}C$ beyond August 25. Therefore, it was believed that air temperature is one of ripening limiting factors in this case. 11. The optimum temperature for ripening in Jinheung was relatively lower than that of Tongil requriing more than $25^{\circ}C$. Air temperature below 21$^{\circ}C$ was one of limiting factors for ripening in Tongil. 12. It seemed that Jinheung has relatively high photosensitivity and moderate thermosensitivity, while Tongil has a low photosensitivity, high thermosensitivity and longer basic vegetative phase. 13. Under a condition of higher nitrogen application at late growing stage, the grain yield of Jinheung was increased with improvement of percentage of ripened grains, while grain yield of Tongil decreased due to decreasing the number of spikelets although photosynthetic activity after flowering was. increased. 14. The grain yield of Jinheung was decreased slightly in the late transplanting culture since its photosynthetic activity was relatively high at lower temperature, but that of Tonil was decreased due to its inactive photosynthetic activity at lower temperature. The highest yield of Tongil was obtained in the early transplanting culture. 15. Tongil was adapted to a higher fertilizer and dense transplanting, and the percentage of ripened grains was improved by shortening of the flowering duration with increased number of seedlings per hill. 16. The percentage of vigorous tillers was increased with a denser transplanting and increasing in number of seedlings per hill. 17. The possibility to improve percentage of ripened grains was shown with phosphate application at lower temperature. The above mentioned results are again summarized below. The Japonica type leading varieties should be flowered before August 20 to insure a satisfactory ripening of grains. Nitrogen applied should not be more than 7.5kg/10a as the basal-dressing and the remained nitrogen should be applied at the later growing stage to increase their photosynthetic activity. The morphological and physiological characteristics of Tongil, a semi-dwarf, Indica $\times$ Japonica hybrid variety, are very different from those of other leading rice varieties, requring changes in seed selection by specific gravity method, in milling and in the cultural practices. Considering the peculiar distribution of grains selected by the method and the brown/rough rice ratio, the specific gravity criterion for seed selection should be changed from the currently employed 1.06 to about 0.96 for Tongil. In milling process, it would be advisable to bear in mind the specific traits of Tongil grain appearance. Tongil is a variety with many weak tillers and under lower temperature condition flowering is delayed. Such characteristics result in inactivation of roots and leaf blades which affects substantially lowering of the percentage of ripened grains due to increased unfertilized spikelets. In addition, Tongil is adapted well to higher nitrogen application. Therefore, it would be recommended to transplant Tongil variety earlier in season under the condition of higer nitrogen, phosphate and silicate. A dense planting-space with three vigorous seedlings per hill should be practiced in this case. In order to manifest fully the capability of Tongil, several aspects such as the varietal improvement, culural practices and milling process should be more intensively considered in the future.he future.

• MISULJARYO - National Museum of Korea Art Journal
• /
• v.96
• /
• pp.239-260
• /
• 2019

This paper examines the circulation and dissemination of painting during and after the nineteenth century through a case study on the One Hundred Fans paintings produced as decorative folding screens at the time. One Hundred Fans paintings refer to depictions of layers of fans in various shapes on which pictures of diverse themes are drawn. Fans and paintings on fans were depicted on paintings before the nineteenth century. However, it was in the nineteenth century that they began to be applied as subject matter for decorative paintings. Reflecting the trend of enjoying extravagant hobbies, fans and paintings on fans were mainly produced as folding screens. The folding screen of One Hundred Fans from the collection of the Museum am Rothenbaum Kulturen und Künste der Welt (hereafter Rothenbaum Museum) in Germany was first introduced to Korean in the exhibition The City in Art, Art in the City held at the National Museum of Korea in 2016. Each panel in this six-panel folding screen features more than five different fans painted with diverse topics. This folding screen is of particular significance since the National Museum of Korea holds the original drawings. In the nineteenth century, calligraphy and painting that had formerly been enjoyed by Joseon royal family members and the nobility in private spaces began to spread among common people and was distributed through markets. In accordance with the trend of adorning households, colorful decorative paintings were preferred, leading to the popularization of the production of One Hundred Fans folding screens with pictures in different shapes and themes. A majority of the Korean collection in the Rothenbaum Museum belonged to Heinrich Constantin Eduard Meyer(1841~1926), a German businessman who served as the Joseon consul general in Germany. From the late 1890s until 1905, Meyer traveled back and forth between Joseon and Germany and collected a wide range of Korean artifacts. After returning to Germany, he sequentially donated his collections, including One Hundred Fans, to the Rothenbaum Museum. Folding screens like One Hundred Fans with their fresh and decorative beauty may have attracted the attention of foreigners living in Joseon. The One Hundred Fans at the Rothenbaum Museum is an intriguing work in that during its treatment, a piece of paper with the inscription of the place name "Donghyeon" was found pasted upside down on the back of the second panel. Donghyeon was situated in between Euljiro 1-ga and Euljiro 2-ga in present-day Seoul. During the Joseon Dynasty, a domestic handicraft industry boomed in the area based on licensed shops and government offices, including the Dohwaseo (Royal Bureau of Painting), Hyeminseo (Royal Bureau of Public Dispensary), and Jangagwon (Royal Bureau of Music). In fact, in the early 1900s, shops selling calligraphy and painting existed in Donghyeon. Thus, it is very likely that the shops where Meyer purchased his collection of calligraphy and painting were located in Donghyeon. The six-panel folding screen One Hundred Fans in the collection of the Rothenbaum Museum is thought to have acquired its present form during a process of restoring Korean artifacts works in the 1980s. The original drawings of One Hundred Fans currently housed in the National Museum of Korea was acquired by the National Folk Museum of Korea between 1945 and 1950. Among the seven drawings of the painting, six indicate the order of their panels in the margins, which relates that the painting was originally an eight-panel folding screen. Each drawing shows more than five different fans. The details of these fans, including small decorations and patterns on the ribs, are realistically depicted. The names of the colors to be applied, including 'red ocher', 'red', 'ink', and 'blue', are written on most of the fans, while some are left empty or 'oil' is indicated on them. Ten fans have sketches of flowers, plants, and insects or historical figures. A comparison between these drawings and the folding screen of One Hundred Fans at the Rothenbaum Museum has revealed that their size and proportion are identical. This shows that the Rothenbaum Museum painting follows the directions set forth in the original drawings. The fans on the folding screen of One Hundred Fans at the Rothenbaum Museum are painted with images on diverse themes, including landscapes, narrative figures, birds and flowers, birds and animals, plants and insects, and fish and crabs. In particular, flowers and butterflies and fish and crabs were popular themes favored by nineteenth century Joseon painters. It is noteworthy that the folding screen One Hundred Fans at the Rothenbaum Museum includes several scenes recalling the typical painting style of Kim Hong-do, unlike other folding screens of One Hundred Fans or Various Paintings and Calligraphy. As a case in point, the theme of "Elegant Gathering in the Western Garden" is depicted in the Rothenbaum folding screen even though it is not commonly included in folding screens of One Hundred Fans or One Hundred Paintings due to spatial limitations. The scene of "Elegant Gathering in the Western Garden" in the Rothenbaum folding screen bears a resemblance to Kim Hong-do's folding screen of Elegant Gathering in the Western Garden at the National Museum of Korea in terms of its composition and style. Moreover, a few scenes on the Rothenbaum folding screen are similar to examples in the Painting Album of Byeongjin Year produced by Kim Hong-do in 1796. The painter who drew the fan paintings on the Rothenbaum folding screen is presumed to have been influenced by Kim Hong-do since the fan paintings of a landscape similar to Sainsam Rock, an Elegant Gathering in the Western Garden, and a Pair of Pheasants are all reminiscent of Kim's style. These paintings in the style of Kim Hong-do are reproduced on the fans left empty in the original drawings. The figure who produced both the original drawings and fan paintings appears to have been a professional painter influenced by Kim Hong-do. He might have appreciated Kim's Painting Album of Byeongjin Year or created duplicates of Painting Album of Byeongjin Year for circulation in the art market. We have so far identified about ten folding screens remaining with the One Hundred Fans. The composition of these folding screens are similar each other except for a slight difference in the number and proportion of the fans or reversed left and right sides of the fans. Such uniform composition can be also found in the paintings of scholar's accoutrements in the nineteenth century. This suggests that the increasing demand for calligraphy and painting in the nineteenth century led to the application of manuals for the mass production of decorative paintings. As the demand for colorful decorative folding screens with intricate designs increased from the nineteenth century, original drawings began to be used as models for producing various paintings. These were fully utilized when making large-scale folding screens with images such as Guo Ziyi's Enjoyment-of-Life Banquet, Banquet of the Queen Mother of the West, One Hundred Children, and the Sun, Cranes and Heavenly Peaches, all of which entailed complicated patterns. In fact, several designs repeatedly emerge in the extant folding screens, suggesting the use of original drawings as models. A tendency toward using original drawings as models for producing folding screens in large quantities in accordance with market demand is reflected in the production of the folding screens of One Hundred Fans filled with fans in different shapes and fan paintings on diverse themes. In the case of the folding screens of One Hundred Paintings, bordering frames are drawn first and then various paintings are executed inside the frames. In folding screens of One Hundred Fans, however, fans in diverse forms were drawn first. Accordingly, it must have been difficult to produce them in bulk. Existing examples are relatively fewer than other folding screens. As discussed above, the folding screen of One Hundred Fans at the Rothenbaum Museum and its original drawings at the National Museum of Korea aptly demonstrate the late Joseon painting trend of embracing and employing new painting styles. Further in-depth research into the Rothenbaum painting is required in that it is a rare example exhibiting the influence of Kim Hong-do compared to other paintings on the theme of One Hundred Fans whose composition and painting style are more similar to those found in the work of Bak Gi-jun.