• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.21 no.1
• /
• pp.59-71
• /
• 2008

In this paper, a software framework that integrates computational and experimental simulation has been developed to simulate and test a large-scale structural system under earthquake loading. The proposed software framework does not need development of the computer codes for both dynamic and static simulations. Any general-purpose software can be utilized with a main control module and interface APIs. This opens up a new opportunity to facilitate use of sophisticated finite elements into hybrid simulation regime to enhance accuracy and efficiency of simulations. The software framework described in the paper is modular and uses object oriented programming concepts. A series of illustrative examples demonstrate that the system is fully-functional and is capable of running any number of experimental and/or analytical components.

• Journal of Power Electronics
• /
• v.13 no.3
• /
• pp.390-399
• /
• 2013

As a result of the depletion of fossil fuels and environmental contamination, it has become important to use renewable energy. For the stable utilization of renewable energy sources, energy storage devices must be used. In addition, renewable and distributed power sources with energy storage devices must operate stably under grid-connected mode. This paper proposed dynamic response modeling for renewable power generation systems including a charger/discharger with an energy storage device in order to derive a method to guarantee stable operation while fully utilizing the energy from the energy storage device. In this paper, the principle operation and design guidelines of the proposed scheme are presented, along with a performance analysis and simulation results using MATLAB and PSIM. Finally, a hardware prototype of a 1kW power conditioning system with an energy storage device has been implemented for experimental verification of the proposed converter system.

• Journal of Powder Materials
• /
• v.14 no.4
• /
• pp.251-255
• /
• 2007

This work is to report not only the effect of rapid solidification of $MgZn_{4.3}Y_{0.7}$ alloys on the micro-structure, but also the extrusion behavior on the materials properties. The average grain size of the atomized powders was about $3-4{\mu}m$. The alloy powders of $Mg_{97}Zn_{4.3}Y_{0.7}$, consisted of I-Phase (Icosahedral, $Mg_{3}Zn_{6}Y_{1}$) as well as Cubic structured W-Phase ($Mg_{3}Zn_{3}Y_{2}$), which was finely distributed within ${\alpha}-Mg$ matrix. The oxide layer formed along the Mg surface was about 48 nm in thickness. In order to study the consolidation behavior of Mg alloy powders, extrusion was carried out with the area reduction ratio of 10:1 to 20:1. As the ratio increased, fully deformed and homogeneous microstructure could be obtained, and the mechanical properties such as tensile strength and elongation were simultaneously increased.

• Korean Institute of Interior Design Journal
• /
• v.18 no.1
• /
• pp.89-98
• /
• 2009

As the quality of life Increases, most people are much interested in their health. The latest knowledge and concepts are newly employed and consistently extended in the field of medical facilities as well. The purpose of this study is to investigate space-structural features of dental clinics, to analyze space components in two aspects, the function and the moving path, to provide with base materials for interior design research, and, as a result, to contribute to the improvement of dental clinics. The visitor survey method was implemented in five dental offices haying opened since 2000. The survey results show that each area is distributed as follows; the consultation room is the largest, the waiting space is secondly largest, and the facility area of medical assistance and administration is the smallest. The consultation space can be designed as semi-opened or opened. Considering moving paths, each should not be too long for the communication between doctors and patients, and for the effective medical examination and treatment. The survey indicates medical assistants have the longest moving path because they fully utilize every space. Based on the survey results described above, more systematic in-depth studies should be performed in the future.

• Journal of Information Processing Systems
• /
• v.7 no.4
• /
• pp.581-594
• /
• 2011

Due to the recent advancement of networking and high-performance computing technologies, scientists can easily access large-scale data captured by scientific measurement devices through a network, and use huge computational power harnessed on the Internet for their analyses of scientific data. However, visualization technology, which plays a role of great importance for scientists to intuitively understand the analysis results of such scientific data, is not fully utilized so that it can seamlessly benefit from recent high-performance and networking technologies. One of such visualization technologies is SAGE (Scalable Adaptive Graphics Environment), which allows people to build an arbitrarily sized tiled display wall and is expected to be applied to scientific research. In this paper, we present a multi-application controller for SAGE, which we have developed, in the hope that it will help scientists efficiently perform scientific research requiring high-performance computing and visualization. The evaluation in this paper indicates that the efficiency of completing a comparison task among multiple data is increased by our system.

• Journal of KIISE:Information Networking
• /
• v.33 no.6
• /
• pp.461-472
• /
• 2006

In this paper, we propose a novel on-demand multicasting algorithm, 'Durable Distance Vector Multicasting(DDVM),' for Mobile Ad hoc Network(MANET). DDVM has a more efficient routing-control complexity than Link State Routing(LSR) and with the smaller complexity, DDVM provides a high delivery ratio for MANET with high mobility by adapting to dynamic topological changes. This is achieved by adding 'combined path durability' statistic into the routing-control information of Distance Vector Routing(DVR). The routing-path duration statistic is computed in a fully distributed manlier at each node in the network based on only local information from neighbour nodes. We show by simulation studies the effectiveness of DDVM compared with On-demand Multicast Routing Protocol(ODMRP).

• Journal of Korea Multimedia Society
• /
• v.18 no.1
• /
• pp.35-41
• /
• 2015

SDN(Software Defined Networking) has been considered as a new future computer network architecture and DDoS(Distributed Denial of Service) is the biggest threat in the network security. In SDN architecture, we present the technique to defend the DDoS SYN Flooding attack that is one of the DDoS attack method. First, we monitor the Backlog queue in order to reduce the unnecessary monitoring resources. If the Backlog queue of the certain server is occupied over 70%, the sFlow performs packet sampling with the server address as the destination address. To distinguish between the attacker and the normal user, we use the source address. We decide the SYN packet threshold using the remaining Backlog queue that possible to allow the number of connections. If certain sources address send the SYN packet over the threshold, we judge that this address is attacker. The controller will modify the flow table entry to block attack traffics. By using this method, we reduce the resource consumption about the unnecessary monitoring and the protection range is expanded to all switches. The result achieved from our experiment show that we can prevent the SYN Flooding attack before the Backlog queue is fully occupied.

• Journal of Power System Engineering
• /
• v.22 no.6
• /
• pp.28-35
• /
• 2018

The large-eddy simulation (LES) was carried out to evaluate the instantaneous vector and vorticity profiles of a small-size axial fan (SSAF) at the operating point of full-flowrate. The downstream flow of the SSAF exhibits a shorter axial flow when not fully developed, especially the stronger vortex appears at the edge near the flow end. On the other hand, the downstream flow of the SSAF exhibits a longer axial flow, and the weaker vortex appears at the edge near the flow end when the flow is sufficiently developed. Moreover, in the downstream of the SSAF, a periodic and intermittent flow pattern appears at the edge showing the axial flow, and the instantaneous vorticity contour lines showing the form of a circle group are distributed at specific intervals from the downstream region of the blade tip, which is considered to be the result of the intermittency phenomenon influenced by the number of blades and the number of revolutions.

• Journal of the Korean Society for Heat Treatment
• /
• v.34 no.5
• /
• pp.218-225
• /
• 2021

In this study, damping capacities were comparatively investigated for Mg-9%Al alloy with as-cast (AC) and fully discontinuous precipitates (DPs) microstructures, respectively. The DPs microstructure was obtained by solution treatment at 678 K for 24 h, followed by furnace cooling to RT. The AC microstructure was typically characterized by partially divorced eutectic β(Mg₁₇Al₁₂) phase particles distributed along the α-(Mg) matrix cell boundaries. The DPs microstructure showed lamellar morphology consisting of α and β thin layers with various interlamellar spacings. The DPs microstructure had better damping capacity than the AC microstructure in the strain-amplitude independent region, while in the strain-amplitude dependent region, the damping behavior was reversed. In view of the microstructural features of AC and DPs, the lower concentration of Al in the α-(Mg) phase for the DPs microstructure and the lower β phase number density for the AC microstructure would be responsible for the higher damping capacities in the strain-amplitude independent and strain-amplitude dependent regions, respectively.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.31 no.4
• /
• pp.440-450
• /
• 2021

Objectives: This study aims to investigate whether working environment measurement institutions(WEMIs) are conducting safety and health education, risk assessment, and oversight of special management materials, and whether working environment measurement and special medical examinations are being conducted as prescribed in the Occupational Safety and Health Act(OSHA). Methods: In of February 2021, a questionnaire was prepared and distributed to 33 WMEIs registered with the Ministry of Employment and Labor(MoEL) in Busan and Gyeongsangnam-do Province. The responses were collected and then analyzed. Results: The findings show that 5 WEMIs(15%) complied fully with OSHA. Risk assessment was conducted by 13 WMEIs(39%) and safety education by 11 WMEIs(33%). Eighteen WMEIs(55%) conducted working environment measurement, and 29 WMEIs(88%) conducted special medical examinations. The implementation rate of the risk assessment in the health industry(85%) was higher than the one in the special technology industry(11%)(p<0.05). The implementation rate of the special medical examination in the examiners(54%) was not as high as the one in the analysts(91%)(p<0.05). Conclusions: The MoEL needs to check whether basic OSHA requirements are being observed during regular inspections by WEMIs. These findings indicate that it is necessary to prepare a plan to improve the rate of compliance with OSHA regulations.