• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.7C
• /
• pp.617-623
• /
• 2005

In this paper, new space-time block codes achieving full rate and full diversity for QAM and quasi-static Rayleigh fading channels when using 3 transmit antennas are proposed. These codes are constructed by serially concatenating the constellation rotating precoders with the Alamouti scheme like the conventional A-ST-CR code Computer simulations show that all of the proposed codes achieve the coding gains greater than the existing ST-CR code, in which the best has approximately 1.5dB and 3dB larger coding gains than the ST-CR code for QPSK and 16-QAM, respectively, at average SER= 10$^{-5}$.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.5C
• /
• pp.286-294
• /
• 2011

In most digital cameras, images are obtained by a sensor overlaid by the color filter array (CFA) such as Bayer, demanding a demosaicking procedure to rebuild the full resolution color images. However, due to the nature of sensor, it is necessary to consider denoising step to remove the noise. In this paper, we analyze demosaicking and denoising jointly and show that the proposed method can solve the denoising issue by simple manner, well suppress different level of noises. The proposed algorithm yields comparable performances measured by several image quality assessment (CPSNR, SCIELAB, and FSIM), while the computational cost is low.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.4A
• /
• pp.320-327
• /
• 2005

In this paper, compensation structures are proposed in the CPW directional couplers with finite-extent backed conductor for tight coupling. The proposed structures are realized T-shaped expanded slots and modified finite-extent backed conductor in CPW coupled structure. The T-shaped expanded slots was used to avoide reduced coupling and modified finite extent backed conductor of dumbbell shape was used to enhance directivity and matching. The designed CPW directional couplers at 1 GHz has good directivity without reducing coupling in simulation by EM solver based on full-wave analysis and measurements.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.45 no.8
• /
• pp.41-46
• /
• 2008

This paper conducts the research on the variation in the characteristics of the resonance and impedance of the metallic parallel plates due to the replacement of the normal dielectric substrate by the metamaterial. The ENG(${\epsilon}<0$), MNG(${\mu}<0}$) and DNG(${\epsilon},{\mu}<0$) types of metamaterial as well as the DPS(Double Positive) material are taken into consideration a full-wave modal analysis method known for accurate computation, as the SRR-kind of Lorentz model for permittivity and metal wire-periodic array-kind of Drude model for permeability, and the behaviors of parallel plates' resonance mode and impedance are observed. Based upon the observation, the design guidelines for the substrate can be addressed regrading how to suppress the parallel plates' spurious resonance modes that degrade the quality of the electronic equipment.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.15 no.5
• /
• pp.1111-1118
• /
• 2011

Several data from equipments on shipboard have been used for the safe navigation of ships. Due to the varieties of data, however, there may be difficulties to manage those data separately. Therefore, it can be effective to develop database for the integrated management of ship data. However, the database may become full soon because huge amount of data are saved continuously. To cope with this problem, this paper proposes multistage database which can always keep the database under full by means of sampling mechanism. To verify the functionality of the methodology, a prototype system has been implemented and tested.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.2
• /
• pp.445-452
• /
• 2010

In this paper, an attempt has been made to design the controller applicable for H.264 level3 encoder of baseline profile on full hardware basis. The designed controller module first stores the images supplied from CMOS Image Sensor(CIS) at main memory, and then reads or stores the image data in macroblock unit according to encoder operation. The timing cycle of the DMA controller required to process a macroblock is 478 cycles. In order to verify the our design, reference-C encoder, which is compatible to JM 9.4, is developed and the designed controller is verified by using the test vector generated from the reference C code. The number of cycle in the designed DMA controller is reduced by 40% compared with the cycle of using Xilinx MIG.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.13 no.3
• /
• pp.531-536
• /
• 2009

In this paper, we propose $256{\times}256$ pixel array fingerprint sensor with an advanced circuits for detecting. The pixel level simple detection circuit converts from a small and variable sensing current to binary voltage out effectively. We minimizes an electrostatic discharge(ESD) influence by applying an effective isolation structure around the unit pixel. The sensor circuit blocks were designed and simulated in standard CMOS $0.35{\mu}m$ process. Full custom layout is performed in the unit sensor pixel and auto placement and routing is performed in the full chip.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.1A
• /
• pp.101-108
• /
• 2007

There nay be collisions among beacons from several full function devices in IEEE 802.15.4 sensor networks. These collision of beacons may cause devices to lose time synchronization, and thus be unable to association. To solve this problem, the IEEE 802.15.4b defines a new Post Beacon Period(PBP), but it does not still alleviate the beacon collision problem. In this paper, we propose two automatic beacon alignment schemes that a node itself can decide its beacon start time using its short address that has been assigned during association. We also simulate and investigate our proposed automatic beacon collision avoidance schemes using NS-2 simulator.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2006.05a
• /
• pp.821-824
• /
• 2006

The purpose of this thesis is to grasp the actual conditions of enjoins the computer games of full 5 years old children in a kindergarten as basical datas to explore ways of program which protects overimmersion in the Internet games. we used 'The early children's actual renditions of enjoying the computer games' making up a question papers which are established questions by me based on the characteristic of research object and preceding research about diagnosis table of addicted internet in Young and passed confidence and propriety.

• Annual Conference of KIPS
• /
• 2018.10a
• /
• pp.889-891
• /
• 2018

가상현실 (Virtual Reality, VR) 컨텐츠가 다양해지면서 사용자들의 관심도 높아지고 있다. 초기 VR 컨텐츠는 헤드 마운티드 디스플레이 (Head Mounted Display, HMD)와 컨트롤러만 사용한다. 사용자의 요구가 높아지면서 현실적인 컨텐츠 구현을 위해서 사용자의 신체 움직임으로 제어하는 풀 바디 트래킹(Full Body Tracking) 기술이 도입되고 있다. 머리에 착용하는 HMD와 양손으로 제어하는 두 개의 컨트롤러 뿐만 아니라 모션캡쳐장비, 트래커 장비를 사용자의 다양한 위치에 착용시켜, 세밀한 움직임 트래킹이 가능해졌다. 본 연구에서 서브 모션 기반의 움직임 추적 방법과 이를 기반한 서브모션 시스템을 제안한다. 서브모션 시스템은 VR 컨텐츠에 사용되는 사용하는 센서 위치를 VR캐릭터의 대응되는 위치에 출력하는 방식이 아닌, 사용자의 움직임에 따라 다양한 센서 위치 변화를 인식하고, 이를 기반으로 VR에서 사전에 지정된 모션을 인식 및 출력한다. 사용자의 움직임을 세분화하여 각각의 연속된 서브모션들로 인식하고, 각각의 서브 모션에서 연속적으로 인식 가능한 서브 모션을 분기를 통해 정의하고 인식함으로써 다양하고 자유도 높은 모션 처리가 가능하다. 선행 기술들의 문제점인 고정된 데미지 방식 및 부자연스러운 모션을 해결하고 사용자에게 실제와 같은 동작을 취하도록 유도하여 몰입감등을 부여할 수 있다. 서브 모션들을 자동적으로 생성하는 시스템을 통해 풀 바디 트래킹 VR 컨텐츠에 적용 가능한 엔진을 연구 및 개발하여 해당 산업의 발전에 이바지하고자 한다.