• Title/Summary/Keyword: full-information

Search Result 3,671, Processing Time 0.031 seconds

A study for gain-controllable precision full-wave rectifier (이득-제어 가능한 정밀 전파 정류기에 관한 연구)

  • 이주찬;박동권;차형우
    • Proceedings of the IEEK Conference
    • /
    • 1999.06a
    • /
    • pp.1149-1152
    • /
    • 1999
  • A gain controllable precision full-wave rectifier for the measurements of small-signal voltage is presented. It consists of gain controllable inverter superdiode and noninverter superdiode. The results of simulation with PSpice and experiment on breadboard show that the proposed rectifier has the characteristic of precise rectification and amplification for small signal voltage.

  • PDF

FMSS를 이용한 사고분석 방법

  • Lee, Dong-Seop
    • Proceedings of the Korean Institute of Navigation and Port Research Conference
    • /
    • 2011.06a
    • /
    • pp.74-76
    • /
    • 2011
  • 다기능 선박조종시뮬레이터(Full-mission Shiphandling Simulator)를 이용한 사고분석 방법은 먼저 사고관련 정보기록을 수집하여 이에 맞는 항만/해역의 데이터베이스를 만들고 이를 바탕으로 사고 선박의 제원, 사진 및 기타정보를 토대로 일반적인 변수 값 기관 특성정보, Hydrodynamic 특성 변경과 선박의 외형에 따라 선박의 데이터베이스를 만들고, 시험운항을 통한 수치를 보정한다. 그리고 이 데이터베이스를 기초로 하여 시뮬레이션 시나리오를 만들어서 사고 당시를 재연하면서 그때, 그때의 상황의 자료를 수집하여 분석하게 된다.

  • PDF

Study on the Construction Method of QC LDPC Codes in ST-BICM Systems for Full Diversity (시공간 비트 인터리브된 부호화 변조 시스템에서 최대 다이버시티를 달성하기 위한 준순환 저밀도 패리티 검사 부호의 생성 연구)

  • Kim, Sung-Hwan
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • v.37 no.3A
    • /
    • pp.151-156
    • /
    • 2012
  • In this paper, design of quasi-cyclic(QC) low-density parity-check codes is proposed to have full diversity for space-time bit-interleaved coded modulation(ST-BICM) systems. Necessary and sufficient conditions that the proposed scheme has full diversity are proved as the condition that submatrices corresponding to the system part of codewords are invertible. And new construction method of binary invertible matrices for QC LDPC codes in ST-BICM systems are also proposed and modification for parity-check matrices are also explained.

Full-Duplex Communication in Cooperative Cognitive Radio Network (협력 인지 통신망에서의 전 이중 통신)

  • Park, Sangwoo;Song, Iickho;Lee, Seungwon
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • v.41 no.11
    • /
    • pp.1374-1379
    • /
    • 2016
  • In almost all schemes of cooperative cognitive radio networks (CCRN), the users transmit and receive signals in half-duplex mode. In this paper, a design of CCRN adopting the full-duplex (FD) technique is addressed. In order to enable FD communication among users in the CCRN, simultaneous transmitting and receiving antennas are employed for the secondary users. Preliminary results from analysis and numerical evaluation indicate that the proposed FD multiple-input-multiple-output CCRN framework can provide a performance gain over the conventional CCRN frameworks.

A Design of Linear State Observers for Motorized Seat Belt System (전동식 안전벨트 시스템의 선형 상태 관측기 설계)

  • Lee, Kang-Seok;Choi, Chin-chul;Lee, Woo-Taik
    • Transactions of the Korean Society of Automotive Engineers
    • /
    • v.20 no.3
    • /
    • pp.58-66
    • /
    • 2012
  • This paper describes a design and a verification of linear state observers for a motorized seat belt system to estimate state information such as angular velocity and load torque. The motorized seat belt system provides functions to protect passengers and improve passenger's convenience. To realize these functions, sensors which can measure an angular velocity and load torque are needed. By use of the linear state observer, state information can be estimated without sensors. The motorized seat belt system is analysed and represented as a state space model which contains load torque as an augmented state. By the developed state space model, a full and reduced order observer are designed and verified by experiments. The full and reduced order observer are also compared from points of view of execution time and noise robustness.

Systematic Development of Tomato BioResources in Japan

  • Ariizumi, Tohru;Aoki, Koh;Ezura, Hiroshi
    • Interdisciplinary Bio Central
    • /
    • v.3 no.1
    • /
    • pp.1.1-1.6
    • /
    • 2011
  • Recently, with the progress of genome sequencing, materials and information for research on tomato (Solanum lycopersicum) have been systematically organized. Tomato genomics tools including mutant collections, genome sequence information, full-length cDNA and metabolomic datasets have become available to the research community. In Japan, the National BioResource Project Tomato (NBRP Tomato) was launched in 2007, with aims to collect, propagate, maintain and distribute tomato bioresources to promote functional genomics studies in tomato. To this end, the dwarf variety Micro-Tom was chosen as a core genetic background, due to its many advantages as a model organism. In this project, a total of 12,000 mutagenized lines, consisting of 6000 EMS-mutagenized and 6000 gamma-ray irradiated M2 seeds, were produced, and the M3 offspring seeds derived from 2236 EMS-mutagenized M2 lines and 2700 gamma-ray irradiated M2 lines have been produced. Micro-Tom mutagenized lines in the M3 generation and monogenic Micro-Tom mutants are provided from NBRP tomato. Moreover, tomato cultivated varieties and its wild relatives, both of these are widely used for experimental study, are available. In addition to these bioresources, NBRP Tomato also provides 13,227 clones of full-length cDNA which represent individual transcripts non-redundantly. In this paper, we report the current status of NBRP Tomato and its future prospects.

A Fast Motion Estimation Algorithm using Probability Distribution of Motion Vector and Adaptive Search (움직임벡터의 확률분포와 적응적인 탐색을 이용한 고속 움직임 예측 알고리즘)

  • Park, Seong-Mo;Ryu, Tae-Kyung;Kim, Jong-Nam
    • Journal of KIISE:Information Networking
    • /
    • v.37 no.2
    • /
    • pp.162-165
    • /
    • 2010
  • In the paper, we propose an algorithm that significantly reduces unnecessary computations, while keeping prediction quality almost similar to that of the full search. In the proposed algorithm, we can reduces only unnecessary computations efficiently by taking different search patterns and error criteria of block matching according to distribution probability of motion vectors. Our algorithm takes only 20~30% in computational amount and has decreased prediction quality about 0~0.02dB compared with the fast full search of the H.264 reference software. Our algorithm will be useful to real-time video coding applications using MPEG-2/4 AVC standards.

Fast Motion Estimation Algorithm for H.264 Video Coding Standard (H.264 동영상 표준 부호화 방식을 위한 고속 움직임 추정 기법)

  • Yoon Sung-Hyun;Choi Kwon-Yul;Lee Seongsoo;Hong Min-Cheol
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • v.30 no.11C
    • /
    • pp.1091-1097
    • /
    • 2005
  • In this paper, we propose fast motion estimation algorithm. Local statistics of a motion vector is highly correlated to motion vectors of its neighboring blocks. According to the property, block-based motion search range is adaptively determined in order to reduce unnecessary search points. Based on the determined search range, motion vector is obtained by variable step search motion estimation. Experimental results show that comparing to Full search motion estimation, the motion searching points of proposed algorithm is reduced as much as $98\%$. Moreover, PSNR and Bit Rate are almost same to Full search method.

Die-to-Die Parasitic Extraction Targeting Face-to-Face Bonded 3D ICs

  • Song, Taigon;Lim, Sung Kyu
    • Journal of information and communication convergence engineering
    • /
    • v.13 no.3
    • /
    • pp.172-179
    • /
    • 2015
  • Face-to-face (F2F) bonding in three-dimensional integrated circuits (3D ICs), compared with other bonding styles, is closer to commercialization because of its benefits in terms of density, yield, and cost. However, despite the benefits that F2F bonding expect to provide, it's physical nature has not been studied thoroughly. In this study, we, for the first time, extract cross-die (inter-die) parasitic elements from F2F bonds on the full-chip scale and compare them with the intra-die elements. This allows us to demonstrate the significant impact of field sharing across dies in F2F bonding on full-chip noise and critical path delay values. The baseline method used is the die-by-die method, where the parasitic elements of individual dies are extracted separately and the cross-die parasitic elements are ignored. Compared with this inaccurate method, which was the only method available until now, our first-of-its-kind holistic method corrects the delay error by 25.48% and the noise error by 175%.

Generation scheme of elemental images for full-direction-curved integral imaging (전방향 커브형 집적 영상에서의 요소 영상의 제작 방법)

  • Shin Dong-Hak;Cho Byung-Chul;Kim Eun-Soo
    • Journal of the Korea Institute of Information and Communication Engineering
    • /
    • v.10 no.5
    • /
    • pp.905-909
    • /
    • 2006
  • Recently various types of curved integral imaging system have been reported for improvement of viewing angle. However, the optical implementation has been limited to only unidirectional system. In this paper, we propose a curved integral imaging (CII) system with additional use of a large-aperture ten in conventional II system and explain a generation scheme of elemental images in the proposed system. The proposed system provides full-directional curvature effect and has simple structure due to the use of well-fabricated flat devices. For the full-directional-curved II system, we perform my analysis based on Johns matrix and synthesize novel elemental images. To show the usefulness of synthesized elemental images, preliminary experiments were performed and some experimental results were presented.