• Journal of the Korean Society for Library and Information Science
• /
• v.38 no.1
• /
• pp.173-197
• /
• 2004

It is searched that 56 out of 185 university libraries(30.2%) has adopted 'subject specialization' organization. This 'subject specialization' emerged when university libraries began to care about their users and services for them more than other factors in planning and structuring their organization. The number of university libraries which try to adopt that organization has been continuously increasing. To settle 'subject specialization' in the university libraries under Korea's proper condition and to maximize its effect, each library should consider one's own conditions and step the reasonable procedure in adopting that system. Considering the similar condition which the university libraries in Korea face such as shortage of material support, 'Mixed Model of subject specialization" is reasonable, which means in whole structure of library function-oriented organization is adopted and in Reference Service, subject specialization is adopted. However, the ideal and final destination of Korea's university libraries is the adoption of 'Full subject specialized model": it can be reached when they are supported by sufficient human resources and good conditions.

• Journal of the Korean Ceramic Society
• /
• v.40 no.5
• /
• pp.481-487
• /
• 2003

A technique for determination of proportions of char, coal ana coke is needed in order to monitor pulverized coal injection performance in operating blast furnace. Quantitative X-ray powder diffraction analysis can be applied to the problem providing that structural information on carbonaceous materials, coal, char, coke and their mixture are known. Chars were prepared from a coal at different temperatures (1000∼1400$^{\circ}C$) and were characterised by X-Ray powder Diffraction (XRD). The XRD result gave crystallite size (height Lc and diameter, La), aromaticity, number of (002) plane in carbon, and d-spacing. As a result, with increasing heat treat temperature of char, Lc$_{(002)}$, La$_{(10)}$ and number of (002) plane in carbon were increased, and d-spacing and FWHM(Full With Half Maximum) were decreased. Result of prediction of amount of char from the mixtures (char, coke and ore) based on the Lc$_{(002)}$ information of two mixtures (coke and char) showed very close values expected.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.26 no.10
• /
• pp.932-935
• /
• 2015

This paper proposes a rectifier using bootstrapping and active body biasing in $0.11{\mu}m$ RF CMOS process. The proposed rectifier employs the full-wave rectifying structure with cross coupling and increases the power conversion efficiency by reducing the threshold voltage and leakage current using bootstrapping and active bias biasing. Also, it has been designed to be applied to a wide range of applications from 13.56 MHz used in wireless power transmission to 915 MHz used in RFID. As a measured result, 80 % of power conversion efficiency is obtained when the input power is 0 dBm at $10k{\Omega}$ load resistance and 13.56 MHz. Also 40 % of power conversion efficiency is shown in 915 MHz.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.27 no.3
• /
• pp.229-238
• /
• 2016

In this paper, we have studied isolation enhancement using a suppression of surface wave to improve performance of array antenna. To reduce isolation between elements of array antenna, perfect magnetic conductor(PMC) and SOFT-surface is designed and located at center of ground plane, isolation and gain is simulated by commercial full wave simulator(HFSS). As a result, isolation of more than 40 dB and gain improvement of 2.2 dBi are obtained at E-plane array in case of both PMC and SOFT-surface. At H-plane array, air coupling is dominant compared to coupling by surface wave. It is conclude that this study is useful for design of compact array antenna and performance improvement of array antenna.

• Journal of Advanced Marine Engineering and Technology
• /
• v.29 no.7
• /
• pp.713-721
• /
• 2005

A marine diesel engine should realize optimal operation efficiency while reducing NOx, PM (Particulate Matters) and other emissions. Fuel injection systems that use electronic control can become an effective means of achieving that objective. However. it still needs some accurate and instant information in order to bring its ability into full potential while sailing on the sea. The important information of them are a shaft torque and continuous combustion pressures of all cylinders. The shaft torque and the propeller thrust described in this paper are measured at an intermediate shaft by using a unique principle that one of two electromagnet coils oscillates a vibrating strip which the length changes with force and the other coil picks up the change of the frequency of the vibrating strip. For further reference, the shaft power meter multiplied the torque by the shaft revolution has already had about 750 sets of sales performance. The research presented in this paper started about ten years ago and is concerned with the development of a combustion pressure sensor that uses the same principle. Recently, the pressure sensor which bears continuous operation has been developed after a hard struggle, that is, the system that consists of a shaft horsepower meter, a propeller thrust meter and a combustion pressure sensor has been completed and has been shown to be reliable. This paper describes the configuration of this system, the material of the combustion pressure sensor, the principle of that, and the improving point of the sensor, and, we finally consider the use of this system.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.36 no.8
• /
• pp.791-801
• /
• 2012

We performed an assessment of wearing, purchasing, satisfaction, and the fit of brassieres according to body and breast type for college women to provide basic data on the manufacture of an ergonomic brassiere. The classifications of domed and conical breast type or projecting and conical breast type were unclear. Flat breast were dissatisfied with the shape of small and flat, and drooping breast were dissatisfied with the shape of big, projected, and drooping. In purchasing a brassiere, the majority of subjects were ignorant of their brassiere size, and over 80% of the subjects bought a brassiere without trying it on. Over 50% of those surveyed said they found it difficult to buy a well-fitted brassiere, particularly for the flat and drooping breast type. Over 70% of those surveyed wore a brassiere of 3/4 cup size, the slim body type wore a brassiere of 1/2 cup size; however, the obese body type wore a brassiere of full-cup size. The flat-breast or slim-body wore a brassiere of a thick pad type but projecting-breast or drooping breast wore brassiere of a thin pad type. Many of the subjects wore an unfitted brassiere in cup size and under bust size. In the classification of breast type, there were slight differences between the breast type that they recognized and the breast type that they were shown. There were distinctions in function, satisfaction, and fitness based on breast type. Therefore, the development of an ergonomic brassiere should considered the characteristics of breast type for fitness and comfort.

• Journal of the Society of Disaster Information
• /
• v.14 no.2
• /
• pp.219-229
• /
• 2018

Purpose: This research proposes an optimization model for effective evacuation routing and scheduling of civilians near the border area when full-scale war threats heighten. Method: To reflect the reality, administrative unit network is created using Kruscal's Algorithm, Harmony Search, CCRP based on the geographical features, population, and traffic data of real cities, and then, optimal civilian evacuation routes are found. Results: Optimal evacuation routes and schedules are computed by repetitive experiments, and it is found that the scenario that minimizes the average civilian evacuation time is effective for the civilian evacuation plan. Conclusion: By using the civilian evacuation plan this research proposes, at the time of establishing the actual civilian evacuation plan, quantitative analysis is used for the effective plan making rather than only depending.

• Journal of the Korean Society for Library and Information Science
• /
• v.42 no.2
• /
• pp.189-208
• /
• 2008

This study aims to deane prototypes of professional librarians as well as their job requirements by analyzing international demands for librarianship. Demands analysis starts with examining librarian job posting websites in the US, UK and Canada, followed by inquiring incumbent librarians in Korea. As for the job requirements. the study parallels definitions by IFLA and ALA with job announcements by hiring institutions. As a result, we identified 21 professional librarian prototypes by subject(7), task(12) and object(2), and defined the job requirements as 1) MLS or equivalent school knowledge with undergraduate degree of library science, and/or at least six years of relevant business experience, or 2) at least nine-rear experience as a second-level full-time librarian with two-rear experience and/or professional training in the job relevant field.

• Proceedings of the KSRS Conference
• /
• 1999.11a
• /
• pp.80-83
• /
• 1999

An efficient modeling and management of a large amount of surface data for a wide rage of geographic information play an important role in determining the functionality of 3D geographic information system. It has been put many efforts to design and manage an effective way to enhence the manipulation of the data by considering geometry type and data structures. Recently, DEM(Data Elevation Model) and TIN(Triangulated Irregular Network) are used for representing surface data. In this paper, we propose a 3D data processing method. The method utilizes the major properties of DEM and TIN, respectively. Furthermore, by approximating DEM with a TIN of an appropriate resolution, we can support a fast and realistic surface modeling. We implement the structure with the following 4 level stages. The first is an optimal resolution of DEM which represent all of wide range of geographic data. The second is the full resolution DEM which is a subarea of original data generated by user's selection in our implemeatation. The third is the TIN approximation of this data with a proper resolution determined by the relative position with the camera. And the last step is multi-resolution TIN data whose resolution is dynamically decided by considering which direction user take notice currently. Specially, the TIN of the last step is designed for realtime camera navigation. By using the structure we implemented realtime surface clipping, efficient approximation of height field and the locally detailed surface LOD(Level of Detail). We used the initial 10-meter sampling DEM data of Seoul, KOREA and implement the structure to the 3D Virtual GIS based on the Internet.

• Proceedings of the Korean Society of Near Infrared Spectroscopy Conference
• /
• 2001.06a
• /
• pp.1627-1627
• /
• 2001

In this study, a newly constructed optical measurement system, whose main components were a parametric tunable laser and a near infrared photoelectric multiplier, was applied to detection of the information for the inside of Satsuma mandarin using time-of-flight near infrared spectroscopy (TOF-NIRS). The combined effects on the time resolved profile of sample diameter, sugar content, the wavelength of the laser beam, and the detection position of transmitted light were investigated in detail. The samples used were Satsuma mandarin (Citrus unshu $M^{ARC}$.) (location: Wakayama, Japan) having the diameters of 50-84 mm. The sugar content measured by a refractometer varied from 9.9 to 16.3 Brix%. Equator of sample was irradiated vertically with the pulsed laser, and transmitted output power was measured on the restricted position of the equator using the optical fiber cable. The sampling time and the number of averaging the output power were 100 ns and 100 times, respectively. The variation of the attenuance of peak maxima At, the time delay of peak maxima t and the variation of full width at half maximum w were strongly dependent on the detection position and the wavelength of the laser beam. At, t and w increased gradually as the sample diameter increased to be much absorbed and vigorously scattered. On the other hand, each optical parameter had a tendency to increase as the sugar content increased. Such behavior was remarkable when the transmitted light was detected at the side face of a sample. When we apply TOF-NIRS to detection of the information for the inside of fruit with high moisture content like Satsuma mandarin, it is very important to give attention to the difference in the scattered light within tissues and the semi-straightly propagated light. Furthermore, we tried to express the resulting phenomena by using a model samples composed of water, sucrose, and milk. The variation of the time resolved profile is strongly governed by the combination of the light absorption component, scattering medium, and refractive index.