• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.8B
• /
• pp.492-501
• /
• 2007

UMTS-WLAN interworking approach can make the best use of the advantages of both networks by eliminating the stand-alone defects of the two services. For the interworking mechanisms of WLANs and UMTS networks, two major solutions have been proposed, namely loose coupling and tight coupling. The loose coupling approach provides separate data paths for WLAN and UMTS. On the other hand, the tight coupling provides a full integration of the WLAN network and the UMTS core network. The loose coupling has been preferred due to the simplicity and less reconfiguration requirement. However, loose coupling is worse in seamless mobility, QoS provision, and network security. In order to lessen the problems involved in the UMTS-WLAN interworking approaches, we propose a new interworking network architecture and a fast vertical handover scheme by employing Mobility Anchor(MA) for interworking between the two different networks. MA can enable authentication and session initialization before L2 handover of the mobile terminal, so that the seamless and fast vertical handover become possible. Thru analysis and numerical experiments, we proved that the proposed scheme has been validated.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.12A
• /
• pp.991-997
• /
• 2009

Transmit beamforming is simple method to achieve the full diversity gain that is available in multiple antenna(MIMO) wireless systems. Unfortunately, the prior condition to achieve this gain requires perfect channel knowledge at both transmitter and receiver, which is impractical on account of limited feedback link. Therefore, for the practical system, codebook based feedback scheme is often employed, where the beamforming vector is selected from the codebook to maximize the output signal-to-noise ratio (SNR) at receiver, and the receiver only sends back the index of the best beamforming vector to the transmitter. In this paper we derive analytical expression of average bit error rate (BER) for the codebook based transmit beamforming MISO system over the feedback error channel. Using this analytical result, we present optimum codebook indexing scheme to improve the performance of this system. From some selected numerical examples we show that our proposed codebook indexing scheme can provide nonnegligible performance improvements in terms of average BER over the severe feedback error channel.

• The Transactions of the Korea Information Processing Society
• /
• v.5 no.4
• /
• pp.1014-1024
• /
• 1998

This paper describes the implementation of the asymmetric digital subscriber lines(ADSL) interface device function in ATM networks. The function of the ADSL interface devices has been achieved within a type of the ATM switch standard board. The board connected with the ADSL modem process the ATM physical layer function of data transfering asymmetrically. For the implementation of the board, we have modeled a worst case of the subscriber line conditions from the existing investigated results on the impairments such as crosstalk, impulse noise, and some important noises loaded to subscrber line. Also we have performed assessment tests in the full test environments. We have found that the board is met to the standard specification in condition with various test loops and the worst line conditions using an ADLS line simulator. And we confirmed that high-speed multimedia services are performed well with the ATM switch and the ADSL subscriber line. It is evaluted that this board can be used for high quality ADSL services through existed copper subscriber line.

• Journal of the Korean Society for Library and Information Science
• /
• v.48 no.3
• /
• pp.335-351
• /
• 2014

This study proposes a customized SNS operational strategy for special libraries based on a case study on the Ocean Science Library (OSL) of South Korea. The study conducted an in-depth analysis on an organizational structure, manpower, contents, and promotion. The outcome of SNS operational strategy deducted from this study can be categorized into several items, including: (1) a selection of an appropriate SNS channel, which meets the objective of the operation; (2) a formal division of works for SNS operation; (3) a designation of full-time managers and an establishment of a task force team; (4) a specialization of contents according to specific subjects; (5) on/off-line promotions focused on events, which encourage participations; (6) an improvement of contents through regular log analyses; and (7) a promotion of library website access through SNS, and so on. This research also suggested the strategies for the development of SNS operation: strengthening of communication and cooperation among librarians; distribution of academic and research outcomes of the umbrella organization; enhancement of a role as a communication channel between librarians and users, and carry out a role as a 'social curator.'

• Journal of the Korea Society of Computer and Information
• /
• v.19 no.9
• /
• pp.45-53
• /
• 2014

This paper suggests methods to chronicle and track the history of dialogues exchanged among characters to prevent logical errors of a story. As for stories that are long with many characters, especially in full-length novels and co-written stories, cognitive burden is imposed on a writer. If the writer has confused understanding of a character, then a logical error would enter the story. This would compromise completeness and integrity of writing. Against the backdrop, this paper shows how dialogues among characters are chronicled and tracked by using the aforementioned tracking methods through design of a writer support system that relieves a writer's cognitive burden while supporting the writing and through an analysis of existing novels. In addition, we showed the accuracy results of average 68.5% through the performance evaluation of the query used in the dialogue history tracking.

• Journal of the Korea Society of Computer and Information
• /
• v.18 no.9
• /
• pp.11-19
• /
• 2013

Most modern computer systems employ cache systems in order to alleviate the access time gap between processor and memory system. The power dissipated by the cache systems becomes a significant part of the total power dissipated by whole microprocessor chip. Therefore, power reduction in the cache system becomes one of the important issues. Partial tag cache is the system for the least power consumption. The main power reduction for this method is due to the use of small partial tag matching, not full tag matching. In this paper, we first analyze the previous regular partial tag cache systems and propose a new address matching mechanism by using locality buffer and address compression. In simulation results, the proposed model shows 18% power reduction in average, still providing same performance level, compared to regular cache.

• International Commerce and Information Review
• /
• v.15 no.3
• /
• pp.177-197
• /
• 2013

The updated International Standard Banking Practice(ISBP), International Chamber of Commerce Publication No. 745, was published to bring its contents in line with UCP 600. The ISBP 745 has dealt with A-Q that are commonly arising in the credit transactions and also explains in detail some of the articles of UCP 600 with the proper interpretation. The updated version ISBP 745 involved aligning it with UCP 600, making certain technical adjustments in expression of words such as "in conflict" instead of "inconsistent", etc. Despite the updated ISBP 745, there remains a question. Where the words "from" or "after" are used in regard to something other than a period of shipment or the maturity date of drafts, there is no guidance from the UCP as to its meaning. The party concerned in credit transactions is also required to have a full understanding of ISBP 745 and the articles of UCP 600 in order to acquire the documents preparation and examination facilitating the parties to minimize discrepancies.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.5
• /
• pp.1187-1193
• /
• 2014

This paper presents an effective motion estimation to improve the performance of the motion compensated temporal filtering (MCTF) which is a core part of the wavelet-based scalable video coding. The proposed scheme makes the motion vector field uniform by the modified median operation and the search strategies using adjacent motion vectors, in order to enhance the pixel connectivity which is significantly relevant to the performance of the MCTF. Moreover, the motion estimation with variable block sizes that reflects the features of frames is introduced for further correlation improvement of the motion vector field. Experimental results illustrate that the proposed method reduces the decomposed energy on the temporal high frequency subband frame up to 30.33% in terms of variance compared to the case of the full search with fixed block sizes.

• Journal of the Ergonomics Society of Korea
• /
• v.31 no.2
• /
• pp.371-377
• /
• 2012

Objective: The aim of this study is to investigate effect of driver's cognitive distraction on driver's physiological state and driving performance, and then to determine parameters appropriate for detecting the cognitive distraction. Background: Driver distraction is a major cause of traffic accidents and poses a serious threat to traffic safety due to ever increasing use of in-vehicle information systems and mobile phones during driving. Cognitive distraction, among four different types of distractions, prevents a driver from processing traffic information correctly and adapting to change in surround vehicle behavior in time. However, the cognitive distraction is more difficult to detect because it normally does not involve significant change in driver behavior. Method: A full-scale driving simulator was used to create virtual driving environment and situations. Participants in the experiment drove the driving simulator in three different conditions: attentive driving with no secondary task, driving and conducting secondary task of adding numbers, and driving and conducting secondary task of conversing with an experimenter. Parameters related with driver's physiological state and driving performance were measured and analyzed for their change. Results: The experiment results show that driver's cognitive distraction, induced by secondary task of addition and conversation during driving, increased driver's cognitive workload, and indeed brought change in driver's physiological state and degraded driving performance. Conclusion: The galvanic skin response, pupil size, steering reversal rate, and driver reaction time are shown to be statistically significant for detecting cognitive distraction. The appropriate combination of these parameters will be used to detect the cognitive distraction and estimate risk of traffic accidents in real-time for a driver distraction warning system.

• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.1444-1447
• /
• 2004

The vacuum-cleaner had made the burden of house chore lighten but the operation labour of a vacuum-cleaner had been so severe. Recently, the cleaning robot was producted to perfectly solve the cleaning labour of a house but it also was not successful because it still had a problem of mess-cleaning, which is the clean-up of big trash and the arrangement of newspapers, clothes, etc. The cleaning robot is to just vacuum dust and small trash and has no function to arrange and take away before the automatic vacuum-cleaning. For this reason, the market for the cleaning robot is not yet built up. So, we need a design method and technological algorithm of new automatic machine to solve the problem of mess-cleanup in house. In this paper, a Home Mess-Cleanup Robot(HMR), which has a practical function of the automatic mess-cleanup, is developed. It need functions of agile automatic navigation, novel manipulation system for mess-cleanup. The automatic navigation system has to be controlled for the full scanning of living room, to recognize the absolute position and orientation of the self, the precise tracking of the desired path, and to distinguish the mess object to clean-up from obstacle object to just avoid. The manipulation system, which is not needed in the vacuum-cleaning robot, must have the functions, how to distinguish big trash to clean from mess objects to arrange, how to grasp in according to the form of mess objects, how to move to the destination in according to mess objects and arrange them. Then, it should be an intelligent system so that the mess cleaning task can be autonomously performed in a wide variety of situations and environments. It need to also has the entertainment functions for the good communication between the human and HMR. Therefore, the Home Mess-cleanup Robot with Entertainmental Human Interface is developed in this paper. Finally, the good performance of the designed machine, HMR'4, is confirmed through the results of the mess clean-up and arrangement.