• JSTS:Journal of Semiconductor Technology and Science
• /
• v.17 no.1
• /
• pp.7-14
• /
• 2017

Due to the recent advances in Phage-Change Memory (PCM) technologies, a new memory hierarchy of computer systems with PCM is expected to appear. In this paper, we present a new page replacement policy that adopts PCM as a high speed swap device. As PCM has limited write endurance, our goal is to minimize the amount of data written to PCM. To do so, we defer the eviction of dirty pages in proportion to their dirtiness. However, excessive preservation of dirty pages in memory may deteriorate the page fault rate, especially when the memory capacity is not enough to accommodate full working-set pages. Thus, our policy monitors the current working-set size of the system, and controls the deferring level of dirty pages not to degrade the system performances. Simulation experiments show that the proposed policy reduces the write traffic to PCM by 160% without performance degradations.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.17 no.4
• /
• pp.561-567
• /
• 2017

This paper presents a 4-channel common-cathode VCSEL driver array operating up to 6.25 Gb/s per channel for the applications of HDMI 2.0 active optical cables. The proposed VCSEL driver consists of an input buffer, a modified Cherry-Hooper amplifier as a pre-driver, and a main driver with pre-emphasis to drive a common-cathode VCSEL diode at high-speed full switching operations. Particularly, the input buffer merges a linear equalizer not only to broaden the bandwidth, but to reduce power consumption simultaneously. Measured results of the proposed 4-channel VCSEL driver array implemented in a $0.13-{\mu}m$ CMOS process demonstrate wide and clean eye-diagrams for up to 6.25-Gb/s operation speed with the bias current 2.0 mA and the modulation currents of $3.1mA_{PP}$. Chip core occupies the area of $0.15{\times}0.1{\mu}m^2$ and dissipate 22.8 mW per channel.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2001.04a
• /
• pp.358-362
• /
• 2001

Environmental Product Life Cycle Management is an activity for defining and describing the product, process of activity environmentally. The activity involves the full life cycle stages of the product; evaluating environmental releases at each stage, determining the aggregate and specific impacts of the releases, developing opportunities to effect environmental improvements. This paper presents a methodological approach for database modeling to build Product Life Cycle Management system and show a set of database modeling. Additionally, a key issue for database is the quality of the provided information.

• Proceedings of the Zoological Society Korea Conference
• /
• 2001.10a
• /
• pp.213.3-214
• /
• 2001

No Abstract, See Full Text

• Journal of Information Display
• /
• v.3 no.1
• /
• pp.22-26
• /
• 2002

Three-dimensional dynamic display system based on computer-generated integral imaging is discussed and its feasibility is verified via some basic experiments. Integrated images observed from different viewing points are seen to have full parallax and the animated 3D image was implemented successfully. Moreover, using large size Fresnel lens array was found to helps widen viewing angle and to make the system more practical.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.34D no.10
• /
• pp.53-59
• /
• 1997

In this paper, we present a 20 GHz low-loss dual-mode channel filter designed by using mode matching method. The performance of dual-mode channel filter mainly depends on iris characteristics. Therefore the exact design of iris is the key point to get good frequncy response of the filter. MOde matching technique is widely used ot design several kinds of waveguide filters because it is simple in theory and can easily calculate the scattering matrices at the discontinuities with simple structure like iris coupled filters. Additionally the effect for finite thickness of the iris in the dual-mode cavity iflter is analyzed by te full-wave method, providing the exact filter implementation without trial and error.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.34S no.1
• /
• pp.26-35
• /
• 1997

In this paper, a VHDL implementation method for the internet protocol (IP) placed on top of ATM, so called IP over ATM, is presented. The proposed implementation method employs a parallel processing architecture to reduce the processing time and offers 155.52Mbps (STM-1) interface with the full-duplex mode for the ATM-based network. Furthermore, in order to minimize the search time for the table look-up, a LANCAM-based structure combining the routing table with the ATMARP table is proposed. The VHDL simulation results show that this proposed method can transmit (receive) at 155.52Mbps with delays of 48.5 clocks (29.5clocks).

• 한국정보통신설비학회:학술대회논문집
• /
• 2009.08a
• /
• pp.203-207
• /
• 2009

WiBro(Mobile WiMAX) has gained momentum as a top candidate to deliver the dream of full mobile wireless internet. To save cost and time in WiBro network design, simulation tool has to deploy powerful and useful analysis functions. If path loss model is more accurate, the reliability of analysis result of simulation tool will be much improved. So we emphasize on the importance of pathloss model in WiBro network design in this paper. For this, we introduce to three kinds of pathloss models(SUI, SCM, SCM-E) supposed properly models in WiBro RF (Radio Frequency) environment. Also we treat from basic theory to practical substance on the pathloss model to adopt WiBro network design/optimization. Finally, we describe about wireless network analysis tool named 'CellPLAN(R)' and techniques possible to improvethe accuracy of pathloss model.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.12 no.3
• /
• pp.388-395
• /
• 2009

Surveillance Radar System for naval vessels is a primary core sensor for command and fire control, and provides CFCS(Command and Fire Control System) information for 3-D surveillance and fire control. It's composed of Antenna, Transmitter/Receiver, Signal Processor, and Air drier, which are installed on and under deck. They should be designed and produced in order to endure at any operating circumstances. This paper analyzes load of a driving part for driving the antenna considering factors under external operating circumstances, and proposes a condition of load for maintaining fixed RPM through analyzing internal load of the driving part, and how to reduce the load to meet the condition. This paper is verified through experimental studies.

• Journal of Information Display
• /
• v.12 no.4
• /
• pp.179-190
• /
• 2011

A complete analysis of the color-viewing-angle properties of different displays is presented herein using color-viewing-angle measurements made with a Fourier-optics system. The color gamut in the CIE u'v' chromatic plane was computed for all the viewing angles. The introduction of the lightness using the $L^*a^*b^*$ color space allowed a more precise analysis of the emissive properties of each display. The displays can be directly compared using a common reference. The viewing-angle dependence can be analyzed in full detail using the on-axis values as reference. The gravity center behavior and area of the color hull were computed for a more precise evaluation and comparison.