• Proceedings of the IEEK Conference
• /
• 2000.11d
• /
• pp.139-142
• /
• 2000

In this paper, the ADI (Adaptive De-interlacing) algorithm is proposed, which improves visually and subjectively horizontal and vertical edges of the image processed by the ELA(Edge Line-based Average) method. This paper also proposes a VLSI architecture for the proposed algorithm and designed the architecture through the full custom CMOS layout process. The proposed algorithm is verified using C and Matlab and implemented using 0.6$\mu\textrm{m}$ 2-poly 3-metal CMOS standard libraries. For the circuit and logic simulation, Cadence tool is used.

• Proceedings of the IEEK Conference
• /
• 2000.11d
• /
• pp.167-170
• /
• 2000

In this paper, we present a fast algorithm for the motion estimation using the efficient selection of an initial search position. In the method, we select the initial search position using the motion vector from the subsmpled images, the predicted motion vector from the neighbor blocks, and the (0,0) motion vector. While searching the candidate blocks, we use the spiral search pattern with the successive elimination algorithm(SEA) and the partial distortion elimination(PDE). The experiment results show that the complexity of the proposed algorithm is about 2∼3 times faster than the three-step search(TSS) with the PSNR loss of just 0.05［dB］∼0.1［dB］ than the full search algorithm PSNR. The search complexity can be reduced with quite a few PSNR loss by controling the number of the depth in the spiral search pattern.

• Proceedings of the IEEK Conference
• /
• 2000.11d
• /
• pp.57-60
• /
• 2000

This paper presents a new adaptive fast motion estimation algorithm along with its architecture. The conventional algorithm such as full - search algorithm, three step algorithm have some disadvantages which are related to the amount of computation, the quality of image and the implementation of hardware, the proposed algorithm uses spatial correlation and a slope of motion vector in order to reduce the amount of computation and preserve good image quality, The proposed algorithm is better than the conventional Block Matching Algorithm(BMA) with regard to the amount of computation and image quality. Also, we propose an efficient at chitecture to implement the proposed algorithm. It is suitable for real time processing application.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.29A no.11
• /
• pp.1-13
• /
• 1992

In this DQDB networks, erasure nodes may be allocated on the bus and release slots which already had been read by destination nodes. An important function of the erasure node must be to eliminate as many requests as erased slots used by downstream nodes. In the networks with priorities, following two additional issues must be solved : (1) accurately to guess for which priority the erased slots is to be used, and (2) to find in a short period a request of that priority to cancel. In this paper, we propose two erasure node algorithms based on elimination of the requests. In these algorithms, the requests are eliminated excessively at low load but optimum elimination can be achieved at full load. Simulation results show that these two algorithms have similar access delay to that of existing algorithms at low load and better performance at high load.

• Proceedings of the IEEK Conference
• /
• 2003.07c
• /
• pp.2733-2736
• /
• 2003

This paper proposes a dry-type active surface EMG electrode for the myoelectric prosthetic hand. The designed electrode is small size for embedding in the socket of prosthetic hand, and it has three leads including the reference of signal. To acquire EMG signal rejected the power noise, a precision differential amplifier and various filters such as the band pass filter band rejection filter, low pass and high pass filter are embedded on the electrode. The final output of the electrode is integrated absolute EMG (IEMG) obtained by full rectifier and moving average circuits. From experimental results using the implemented dry-type active surface EMG electrode, the proposed electrode is feasible for the myoelectric prosthetic hand.

• Proceedings of the IEEK Conference
• /
• 2003.07c
• /
• pp.2729-2732
• /
• 2003

This paper proposes a real-time method to recognize shoulder elevation motions by comparing EMG signals on the Levator scapulae muscles with double threshold values. To achieve real-time, we implement a EMG signal processing hareware embedded band-rejection filter, low-pass filter, full rectifier and moving average circuits. And a high speed microprocessor is used for implementing the double thresholds method. The available shoulder motions for the human-computer interface are elevation of left, right and both shoulders. From experimental results we show that the proposed real-time processing hardware and double thresholds method are useful for the real-time EMG-based human-computer interface.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.35S no.11
• /
• pp.37-43
• /
• 1998

This paper proposes a new echo canceller that can be used in a full-duplex digital subscriber loop modem. The proposed echo canceller uses a NLMS-based parallel adaptation NLMS (PA-NLMS) algorithm. The PA-NLMS algorithm that an estimate of the nonstationarity to additive noise ratio (NNR) gained from two distinct NLMS processes is used to select the value of NLMS convergence-controlling parameter has been developed. Numerical results based on computer simulation show that the proposed algorithm has a convergence rate approaching that of the fastest possible NLMS process while improving on its MAC performance considerably.

• Proceedings of the IEEK Conference
• /
• 2004.06b
• /
• pp.399-402
• /
• 2004

This paper presents a system-on-chip prototype implementing a full integration for a portable digital audio system. The chip is composed of a audio processor block to implements audio decoding and voice compression or decompression software, a system control block including 8-bit MCU core and Memory Management Unit (MMU) a low power 16-bit ${\Sigma}{\Delta}$ CODEC, two DC-to-BC converter, and a flash memory controller. In order to support other audio algorithms except Mask ROM type's fixed codes, a novel 16-bit fixed-point DSP core with the program-download architecture is proposed. Funker, an efficient power management technique such as task-based clock management is implemented to reduce power consumption for portable application. The proposed chip has been fabricated with a 4 metal 0.25um CMOS technology and the chip area is about 7.1 mm ${\times}$ 7.1mm with 100mW power dissipation at 2.5V power supply.

• IEIE Transactions on Smart Processing and Computing
• /
• v.2 no.5
• /
• pp.317-321
• /
• 2013

This paper proposes a detection algorithm for view reversal in a stereoscopic video using a disparity map and motion vector field. We obtain the disparity map of a stereo image was obtained using a specific stereo matching algorithm and classify the image into the foreground and background. Next, the motion vector field of the image on a block basis was produced using a full search algorithm. Finally, the stereo image was considered to be reversed when the foreground moved toward the background and the covered region was in the foreground. The proposed algorithm achieved a good detection rate when the background was covered sufficiently by its moving foreground.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.17 no.2
• /
• pp.186-191
• /
• 2017

An integrated pressure-sensor system was developed using the sensor-conditioning processes, which resulted in the optimum sensitivity of the pressure-sensor through the signal amplification, noise reduction, and level shift. Due to the specified characteristics among the components, such as operation range, the sensor output was generally limited compared to the full scale of the reading when coupled with other parts. Devices fabricated exhibited comparable characteristics with higher pressure sensitivity to that of the pressure sensor without sensor-conditioning process. In this work, the sensor resolution was at least enhanced at least by 25% using the sensor-conditioning processes.