• Journal of Korean Institute of Industrial Engineers
• /
• v.35 no.2
• /
• pp.141-149
• /
• 2009

As the number of personal computers installed in vehicles increases, a touchpad often used in a labtop computer can be used for the control of an in-vehicle information system (IVIS). Using a touchpad to control the system allows the user to select among large amount of information with a single touch of dragging. For safety and convenience of a driver, the touchpad could be placed on a steering wheel. This research is designed to calculate the most efficient Control-Response Ratio (C/R ratio) for the menu interaction of a touchpad on a steering wheel. Since the menu pointer's rate of movement and proper C/R ratio is determined by the amount of selected information, the amount of displayed information and the movement of a menu pointer was chosen to be independent variables. The dependent variables are a user's preference and task completion time. Two factor full factorial within subject design was used 16 subjects. The investigation revealed that the amount of selected information increased with increasing C/R ratio. The movement of the pointer became slower as the amount of information increased. The best C/R ratio was calculated for each amount of information and preference regression of the user's preference was drawn accordingly. Through this research, the automobile interior designer can benefit from the guidelines suggested for the touchpad control.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.12 no.3
• /
• pp.1-12
• /
• 2009

This study aims to analyze the existing problem of geo-spatial information maintenance and then, show maintenance strategies suitable for new integrated environments. We look for AS-IS which is provider-centered, top-down, and also drive implications from analyzing oversea best practice. For analyzing of geo-spatial maintenance pattern, we polled about 20 local governments and private enterprise to find out AS-IS of geo-spatial information and result in maintenance pattern and component. From this, we suggest 4 kinds of strategies. This study shows the strategy not only which decide the question about the problem of existing geo-spatial maintenance but which find a way of combining and utilizing all geo-spatial information which is 8 criteria basic geographical information. This is a win-win program of all organization which produce, construct, make full use of national geo-spatial information.

• Journal of the Korean BIBLIA Society for library and Information Science
• /
• v.32 no.3
• /
• pp.265-284
• /
• 2021

This study is to present improvement plans by examining how Korean literature house websites provide information services. Seventy-nine Korean literature houses out of eighty-eight members of the Korean Literature House Association were studied, except nine that did not construct websites. Three core elements, including website style, literary works information and writer information, together with thirteen sub-elements, were derived from precedent studies. As a result, it was found that 90% of the literature houses were operating websites, but the classification criteria for the literary works and cataloguing rules were not unified, and literature information was not provided sufficiently. Thus, this study suggested improvement plans such as support to build a website, developing cataloging guidelines for literature houses, providing more full-text literature and providing information about literary works and writer.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.15 no.10
• /
• pp.3729-3749
• /
• 2021

At present, deep convolution network-based salient object detection (SOD) has achieved impressive performance. However, it is still a challenging problem to make full use of the multi-scale information of the extracted features and which appropriate feature fusion method is adopted to process feature mapping. In this paper, we propose a new adjacency auxiliary network (AANet) based on multi-scale feature fusion for SOD. Firstly, we design the parallel connection feature enhancement module (PFEM) for each layer of feature extraction, which improves the feature density by connecting different dilated convolution branches in parallel, and add channel attention flow to fully extract the context information of features. Then the adjacent layer features with close degree of abstraction but different characteristic properties are fused through the adjacent auxiliary module (AAM) to eliminate the ambiguity and noise of the features. Besides, in order to refine the features effectively to get more accurate object boundaries, we design adjacency decoder (AAM_D) based on adjacency auxiliary module (AAM), which concatenates the features of adjacent layers, extracts their spatial attention, and then combines them with the output of AAM. The outputs of AAM_D features with semantic information and spatial detail obtained from each feature are used as salient prediction maps for multi-level feature joint supervising. Experiment results on six benchmark SOD datasets demonstrate that the proposed method outperforms similar previous methods.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.21 no.4
• /
• pp.408-416
• /
• 2010

A study on the calibration of an X-band HPS(Hongik Polarimetric Scatterometer) system for ground-based operation is presented in this paper. In order to calibrate the scatterometer system, the degree of its distortions are analyzed by comparison between theoretical- and measured-values using the theoretically well-known calibration targets such as a metal sphere, a trihedral corner reflector(CR) and a metal cylinder. The calibration works in the field conditions depend on the precise and stable measurements of those calibration target. we present a measurement technique, so-called, an automatic 2-D target-scanning technique, using the incidence-angle(${\xi}-$ and ${\phi}-$ directions) control of HPS system. Then, we used STCT(Single-Target Calibration Technique) and GCT(General Calibration Technique) to calibrate a distortion of the scatterometer system, and measured the polarimetric RCS(Radar Cross Section) and phase-difference of a trihedral-CR as a test-target to verify the accuracy of the calibration technique. Then, three different types(i.e., 10, 20, 30 cm) of trihedral-CR were used. we obtained the error ranges about ${\pm}1.0$dB, ${\pm}0.5$ dB in a polarimetric RCS and about $-20^{\circ}{\sim}0^{\circ}$ and ${\pm}5^{\circ}$ in the co-polarized phase-difference by using the GCT and STCT, respectively.

• Atmosphere
• /
• v.16 no.1
• /
• pp.19-31
• /
• 2006

The purpose of this study is to develop the statistical model to predict sea level pressure of typhoon period in south coast of the Korean Peninsula. Seven typhoons, which struck south coast of the Korean Peninsula, are selected for this study, and the data for analysis include the central pressure and location of typhoon, and sea level pressure and location of 19 observing site. Models employed in this study are the first order regression, the second order regression and the neural network. The dependent variable of each model is a 3-hr interval sea level pressure at each station. The cause variables are the central pressure of typhoon, distance between typhoon center and observing site, and sea level pressure of 3 hrs before, whereas the indicative variable reveals whether it is before or after typhoon passing. The data are classified into two groups - one is the full data obtained during typhoon period and the other is the data that sea level pressure is less than 1000 hPa. The stepwise selection method is used in the regression model while the node number is selected in the neural network by the Schwarz's Bayesian Criterion. The performance of each model is compared in terms of the root-mean square error. It turns out that the neural network shows better performance than other models, and the case using the full data produces similar or better results than the case using the other data.

• The KIPS Transactions:PartC
• /
• v.9C no.1
• /
• pp.73-78
• /
• 2002

In WATM networks, in order to perform dynamic slot allocation required slots of mobile terminals are estimated based on DP (Dynamic Parameter) reflecting characteristics of traffic. In VBR (Variable Bit Rate) traffic, slot allocation is done at MT considering both time-dependent characteristics and QoS (Quality of Service) requirements. In this paper, DPs-buffer state information and buffer state change-are transmitted through in-band signaling. BS (Base Station) performs dynamic slot allocation considering traffic characteristics of each MT (Mobile Terminal), in other words, buffer state information informs the potentiality of 'buffer full state'to BS if MT buffer is over the specific threshold value and buffer state change notifies change in buffer state of incoming cells to MT. If buffer state information is equal to 'low (more than threshold)' and 'abrupt increase' it generates 'buffer full' state cell transmission delay or cell loss might occur. At this time BS should assign additional slots to MT, and then MT consumes cells in its buffer. In simulation, the proposed scheme shows better performance in cell delay and loss than EPSA (Estimation-Prorated Slot Assignment) in-band scheme.

• International Journal of Precision Engineering and Manufacturing
• /
• v.4 no.5
• /
• pp.27-33
• /
• 2003

G-code, another name of ISO6983, has been a popular commanding language for operating machine tools. This G-code, however, limits the usage of today's fast evolving high-performance hardware. For intelligent machines, the communications between machine and CAD/CAM departments become important, but the loss of information during generating G-code makes the production department isolated. The new standard for operating machine tools, named STEP-NC is just about to be standardized as ISO14649. As this new standard stores CAD/CAM information as well as operation commands of CNC machines, and this characteristic makes this machine able to exchange information with other departments. In this research, the new CNC machine operated by STEP-NC was built and tested. Unlike other prototypes of STEP-NC milling machines, this system uses the STEP-NC file in XML file form as data input. This machine loads information from XML file and deals with XML file structure. It is possible for this machine to exchange information to other databases using XML. The STEP-NC milling machines in this research loads information from the XML file, makes tool paths for two5D features with information of STEP-NC, and machines automatically without making G-code. All software is programmed with Visual $C^{++}$, and the milling machine is built with table milling machine, step motors, and motion control board for PC that can be directly controlled by Visual $C^{++}$ commands. All software and hardware modules are independent from each other; it allows convenient substitution and expansion of the milling machine. Example 1 in ISO14649-11 having the full geometry and machining information and example 2 having only the geometry and tool information were used to test the automatic machining capability of this system.

• The Korean Journal of Financial Studies
• /
• v.2 no.2
• /
• pp.315-344
• /
• 1995

The relationship of information flow and market price formation are central to the basic tenets of financial economics. Whereas information is usually treated as being either public or private(monopolistic), most empirical studies focus on the price effects of public announcements. More recent research has centered more on the role of private information, such as insider trading, in efficient pricing and whether such trading increases investor welfare. Typically, 'insider trading' refers to an officer that trades in his/her company's shares. Insider trading, however, also refers to anyone who generates private, albeit costly, information concerning a stock's fundamental value. Normally, such insider activity is more difficult to ascertain. One way in which negative information is revealed is through short-selling activity, especially the monthly short-interest positions reported by the national stock exchanges. Diamond and Verrecchia(1987) provide a theoretical paradigm that predicts a negative price adjustment upon announcement of n company's monthly short interest, if the short interest displays an unusual increase and is correlated with negative information that is not yet public. Empirical studies of the short-run, negative price effect predicted by Diamond and Verrecchia find mixed results. One explanation is that the time period studied is too short for the market to absorb the informational content of these announcements. One reason is that these announcements are an ambiguous signal that requires more individuals and time to collect and act on the same information before full revelation occurs or before the implicit information becomes publicly known. This 'long delayed reaction' also serves as a motivation for related research on the wealth effect of mergers, share repurchases, and initial equity offerings in which long-run performance differs from the initial, short-run reaction to such announcements or offerings.

• International Commerce and Information Review
• /
• v.17 no.1
• /
• pp.193-214
• /
• 2015

This study was conducted to explore the impact of the strategic supply chain orientation on the supply chain performance of raw materials export-import firms. In addition, this study analyzed the mediated effect of innovation and information sharing between the strategic supply chain orientation and supply chain performance of the firms. In the research model of this study considered the strategic supply chain orientation, innovation, information sharing and supply chain performance as the characteristics of the raw materials export-import firms by dividing the learning performance and market performance. The sample firms be analyzed were 445 firms. The 7 hypothesis including moderated effect were analyzed by using LISREL as structural equation modeling. According to the path analysis, the strategic supply chain orientation had a positive impact on the innovation activity. However, it did not have a positive influence on the information sharing. In the analysis of the mediated effect, the innovation activity of supply chain showed a full mediated effect between the strategic supply chain orientation and the information sharing. And the information sharing showed a partial mediated effect between the strategic supply chain orientation of these firms and the supply chain performance.