• Proceedings of the IEEK Conference
• /
• 2003.07d
• /
• pp.1495-1498
• /
• 2003

This paper has been studied about designed digital-pen using PIC and Accelerometer and about calculated acceleration by the measure analog signal from accelerometer Finally, we calculate the coordinates and the tilt about the acceleration and discuss the possibility of using the digital-pen from cellular phone. And we discuss about the full-duplex communication of input data that displayed in cellular phone.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.30B no.5
• /
• pp.1-9
• /
• 1993

In this paper, we develop enhanced hypercube architectures and routing algorithms to realize arbitrary permutations in circuit switching. We prove that a hypercube is rearrangeable if one additional pair of links (one full-duplex communication line) is provided in only one dimesion of connections. We also prove that if each connection between two neighboring nodes consists of two pairs of links, the hypercube can handle two independent permutations simultaneously.

• Proceedings of the Korean Institute of Communication Sciences Conference
• /
• 1986.04a
• /
• pp.102-106
• /
• 1986

A digital telephone set for a voice/data PABX has been implemented with 3 semicustom IC`s, and one-chip microprocessor, etc. It adopts TCM(Time Compression Multiplexing) digital transmission method, and has the capacity of 144kb/s full-duplex digital transmission.

• Proceedings of the KIEE Conference
• /
• 2003.11c
• /
• pp.519-523
• /
• 2003

This paper describes the communication system of sequencing sorter. Generally sequencing sorter is a machine that sorts mails by delivery order. And designed sequencing sorter is composed of 5 physical modules. So, it is necessary to communicate with each module and to control this communication. A computer called Machine Management Computer, controls this. This paper is about the communication system with MMC and module controllers. This is PC-based, asynchronous full-duplex 4-wire serial systems. 3 protocol layers are presented and stop-and-wait flow control is adopted. Because designed sequencing sorter has to be operated high speed about 27,000 letters per hour, we analyzed the network traffic in the worst case. So, we could find that the communication system has to use above 115,200bps speed.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.13 no.2
• /
• pp.711-732
• /
• 2019

Many unmanned aerial vehicle (UAV) applications have been employed for performing data collection in facilitating tasks such as surveillance and monitoring objectives in remote and dangerous environments. In light of the fact that most of the existing UAV relaying applications operate in conventional half-duplex (HD) mode, a full-duplex (FD) based UAV relay aided wireless network is investigated, in which the UAV relay helps forwarding information from the source (S) node to the destination (D). Since the activated UAV relays are always floating and flying in the air, its channel state information (CSI) as well as channel capacity is a time-variant parameter. Considering decode-and-forward (DF) relaying protocol in UAV relays, the cooperative relaying channel capacity is constrained by the relatively weaker one (i.e. in terms of signal-to-noise ratio (SNR) or signal-to-interference-plus-noise ratio (SINR)) between S-to-relay and relay-to-D links. The channel capacity can be optimized by adaptively optimizing the transmit power of S and/or UAV relay. Furthermore, a hybrid HD/FD mode is enabled in the proposed UAV relays for adaptively optimizing the channel utilization subject to the instantaneous CSI and/or remaining self-interference (SI) levels. Numerical results show that the channel capacity of the proposed UAV relay aided wireless networks can be maximized by adaptively responding to the influence of various real-time factors.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.56 no.3
• /
• pp.629-631
• /
• 2007

In hands-free full-duplex communication systems, acoustic signals picked up by the microphones can be mixed with echo signals as well as noises, which may result in poor performance of the corresponding communication system. Also, the system performance may decrease further if the reverberation occurs since it is harder to estimate the impulse response of the demixing system. For blind source separation (BSS) in such cases, a time-frequency masking approach can be employed to separate undesired echo signals and noises, but, permutation ambiguities also should be solved for the echo cancellation. In this paper, we propose a new acoustic echo cancellation (AEC) approach utilizing the time-frequency masking and higher-order statistics, whereby a desired signal selection, based on coherence and third-order statistics (i.e., kurtosis), is introduced along with output signal normalization. Simulation results demonstrate that the proposed approach yields better echo and noise cancellation performances than the conventional AEC approaches.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2004.11a
• /
• pp.435-440
• /
• 2004

In this study, it is aimed to construct a remote home doctor system utilizing GIS technique. Remote home doctor system consists of three major compartments ; full-duplex communication system, visible communication system, and data backup system. On this system, a company request home doctor is connected with environment specialists and pollution control equipment company. The database in this system consists of spatial data and attribute data. Spatial data are made by topographic data and company location data. Attribute data consists in document data, status of company, products, amount of raw material used, odor discharge process, pollution discharge information and prevention equipments.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.10 no.3
• /
• pp.119-125
• /
• 2014

Echo cancellation is required for a dual-duplex high speed communication such as digital subscriber line(DSL), in order to allow each individual loop to operate in a full duplex fashion. Echo cancellation was one of the most difficult aspects of DSL design, requiring high linearity and total echo return loss in excess of 70 dB. For a long and rapidly changing echo response, if the echo is cancelled by an adaptive echo canceller, the echo canceller needs more taps and its performance is decreased. But if the response is divided into several responses, which response is estimated by a adaptive digital filter and combined, the computation complexities are decreased and the performance is increased. Therefore, the adaptive multi-stage echo canceller is proposed to decrease the computation complexity and increase the performance of echo return loss, in which the echo canceller is composed of several stage echo canceller estimating each divided echo response. Through computer simulations, this multi-stage echo canceller is verified to have merits for high speed communications such as DSL application.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.10
• /
• pp.3756-3760
• /
• 2010

In this paper we propose network design for power line communication of electric railway using messenger wire. we carried out feasibility study on the power line communication(PLC) using Contact wire and messenger wire which are required at electric railway. First of all, full-duplex data communication was implemented using coupler which is suspended on messenger wire at non-voltage state. We verified data transfer rate was found to be good, and then proposed a design example of PLC network as the main components for PLC. we will study continuously make an effort to verify on the network design of PLC for further study.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.2
• /
• pp.273-284
• /
• 2015

The feasibility conditions of interference alignment (IA) are analyzed for reverse duplex systems, in which one cell operates as downlink (DL) while the other cell operates as uplink (UL) assuming one-sid base station (BS) cooperation. Under general multiple-input and multiple-output (MIMO) antenna configurations, a necessary condition and a sufficient condition for one-shot linear IA are established, i.e., linear IA without symbol or time extension. In several example networks, optimal sum degrees of freedom (DoF) is characterized by the derived necessary condition and sufficient condition. For some special class of networks, a sufficient condition is established in a more compact expression, which also yields the necessary and sufficient condition. Simulation results demonstrate that the proposed IA does not only achieve larger DoF but also significantly improves the sum rate in the practical signal-to-noise ratio (SNR) regime.