• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.1B
• /
• pp.56-65
• /
• 2002

This paper proposes a novel transmit diversity technique, namely symbol split orthogonal transmit diversity (SS-OTD). In this technique, full path diversity and temporal diversity are achieved by combining orthogonal transmit diversity technique (OTD) technique with the symbol splitting method proposed by Meyer. Its performances is simulated for fundamental channels associated with the forward link of the IS-2000 system, and then compared with those of OTD and space-time spreading (STS). Our proposed method offers a 0.5-7.7dB performance improvement over OTD under various simulation environments and its performance is similar to STS. Moreover, compares with that of STS, the peak-to-average power ratio (PAR) of transmitted signals in SS-OTD is reduced by a maximal 1.35dB, which decreases the complexity of base station RF devices, such as power amplifiers. Thus, SS-OTD is comparable to STS in performance and superior to STS in the cost and efficiency of base station RF devices.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.11 no.2
• /
• pp.145-150
• /
• 2016

The capability of accurate positioning and tracking is necessary to implement an unmanned autonomous driving system. The moving-baseline GPS Technique is a promising candidate to mitigate positioning errors of conventional GPS system. It provides accurate positioning data based on the phase difference between received signals from multiple GPS antennas mounted on the same platform. In this paper, we propose a dual-band dual-circularly-polarized antenna suitable for the moving-baseline GPS. The proposed antenna operates at GPS L1 and L2 bands, and fed by the side of the antenna instead of the bottom. The antenna is firstly designed by calculating theoretical values of key parameters, and then optimized by means of 3D full-wave simulation software. Simulation and measurement results show that the optimized antenna offers 6.1% and 3.7% bandwidth at L1 and L2, respectively, with axial ratio bandwidth of more than 1%. The size of the antenna is $73mm{\times}73mm{\times}6.4mm$, which is small and low-profile.

• Journal of Broadcast Engineering
• /
• v.16 no.5
• /
• pp.861-872
• /
• 2011

Many fast block-matching algorithms (BMAs) in motion estimation field reduce computational complexity by screening the number of checking points. Although many fast BMAs reduce computations, sometimes they should endure matching errors in comparison with full-search algorithm (FSA). In this paper, a novel fast BMA for constrained one-bit transform (C1BT)-based motion estimation is proposed in order to decrease the calculations of the block distortion measure. Unlike the classical fast BMAs, the proposed algorithm shows a new approach to reduce computations. It utilizes the binomial distribution based on the characteristic of binary plane which is composed of only two elements: 0 and 1. Experimental results show that the proposed algorithm keeps its peak signal-to-noise ratio (PSNR) performance very close to the FSA-C1BT while the computation complexity is reduced considerably.

• Journal of the Ergonomics Society of Korea
• /
• v.31 no.6
• /
• pp.757-764
• /
• 2012

Objective: The aim of this study is to find the optimal values of sliding factors which influence the mechanical emotion of users when they use sliding type mobile phones. Background: There are various researches that study the emotion of using mobile phones. They focus the correlation between emotion words and design factors and use the commercial products by the subjects in the experiment. However, it has a limit in finding the optimal point of emotional factors because we can search the restricted values in the mass production of the products. Therefore, we will find the optimal points by realizing the full range of the user's mechanical emotion. Method: First, we need to get the detailed factors which can describe the mechanical emotion in sliding up and down the mobile phone. Next, we find the control factors by considering the correlation between the factors of the sliding emotion and the possibility of quantitative design. To find the optimal points on the control factors, we make a sliding evaluation system which can help users feel the sliding mechanical emotion by realizing control factors. Finally, we find the optimal points by doing the experiment the system being used. Results: The critical values of the factors which are the main variables of this study are Open Max Force and Dead point Ratio. The optimal point of the Open Max Force is 200~250g/f, and the Dead point Ratio is 40~50%. Conclusion: In this study we develop the sliding evaluation system to realize the control factors of the sliding type phone and find the optimal values of the critical factors. Application: The results can be used as the criteria for designing sliding type phone.

• Proceedings of the SAREK Conference
• /
• 2009.06a
• /
• pp.272-278
• /
• 2009

The characteristics of hybrid type absorption chiller are studied numerically to use a waste hot water effectively. In the case of the full load, the concentration and temperature of LiBr solution are increase about $11^{\circ}C$, 1.3% respectively at the single effect generator by hot water. As a result, the heat of the high temperature generator are decrease, so the energy can be saved. As the partial load decreased the consumption ratio of fuels are decreased and the reduction ratio of fuels are increased. The variation of COP with the inlet temperature of hot water is higher than that of the flow rate of hot water. The effect of mean temperature difference with solution and hot water of the generator are higher that of flow rate of hot water, it can effect on COP which is sensitive to heat of generator.

• Safety and Health at Work
• /
• v.8 no.2
• /
• pp.162-168
• /
• 2017

Background: Pelvic ring fractures (PRFs) may influence the daily activities and quality of life of the injured. The aim of this retrospective study was to explore the functional outcomes and factors related to return to work (RTW) after PRF. Methods: During the years 2003-2012, 282 injured individuals aged 20-55 years on the date of the accident, were hospitalized and treated for PRFs in a large tertiary hospital in Athens, Greece. One hundred and three patients were traced and contacted; 77 who were on paid employment prior to the accident gave their informed consent to participate in the survey, which was conducted in early 2015 through telephone interviews. The questionnaire included variables related to injury, treatment and activities, and the Majeed pelvic score. Univariate and multiple regression analyses were used for statistical assessment. Results: Almost half of the injured (46.7%) fully RTW, and earning losses were reported to be 35% after PRF. The univariate analysis confirmed that RTW was significantly related to accident site (labor or not), the magnitude of the accident's force, concomitant injuries, duration of hospitalization, time to RTW, engagement to the same sport, Majeed score, and complications such as limp and pain as well as urologic and sexual complaints (p < 0.05 for all). On multiple logistic regression analysis, the accident sustained out of work (odds ratio: 6.472, 95% confidence interval: 1.626-25.769) and Majeed score (odds ratio: 3.749, 95% confidence interval: 2.092-6.720) were identified as independent predictive factors of full RTW. Conclusion: PRFs have severe socioeconomic consequences. Possible predictors of RTW should be taken into account for health management and policies.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.23 no.1
• /
• pp.78-89
• /
• 1999

Clothes enhance visual images through the interaction between space and background of the wearer. The influence of background is important as that of the clothes when the observer understands the images. We look at fashion pictures used as important as that various backgrounds are presented depending on the image of the clothes. The clothing the model wears in the pictures takes on shape and space which supports the clothes. The background interact to from the whole image. The background has an important influence on the delivery of image for the clothes. However when the clothes are presented in the background there are some cases that all or parts of clothes can be shown. We must consider the composition ratio of the clothes and background which influences the whole image of the clothing. These interactions and influences on the whole image in regards to clothing background and the ratio will be the focus of this study. clothing was Modern Mannish Casual, Feminine, Ground was decided artificial setting 1 natural setting 1, indoor setting 1, artificial setting 2, natural setting 2, indoor setting 2, Percentage of Clothing was 80% , 140%, 200%,. Thus visual stimulus were 72 pictures that were combined Clothing Ground and Percentage of Clothing, the main survey of questionary consisted of their evaluation of the Picture image combined Clothing and Ground by 30 semantic differential bi-polar scales and the subjects were 50 students majoring in clothing and textile. The data analyzed by factor analysis MCA, MDS, The major finding were as follows : 1) As a result of factor analysis, 5 factors -Attractiveness Hardness and softness Cuteness Attention Cool and Warm factor were found out as constructing factors the Picture image combined Clothing and Ground 2) According to multidimensional positioning map were presented in a stimulus position the perceptive image differed in degree of similarity as a ground construction of stimulus in spite of same clothing image. It will aid in choosing the most beneficial background for any clothing brand. It will enhance the picture images to their full potential in any advertising medium.

• Journal of the Korean Ceramic Society
• /
• v.46 no.4
• /
• pp.392-396
• /
• 2009

AlON was fabricated by the pressureless reaction sintering of $Al_2O_3$-AlN powder mixtures. The ratio of AlN to $Al_2O_3$ as well as various sintering aids were the main variables for this study. The optimum ratio of AlN in the $Al_2O_3$-AlN mixture was approximately 35.0 mol%. For the sintering aids, only when a small amount of MgO was added together with $Y_2O_3$ and BN, AlON specimens could be sintered to a full density with negligible pores and high transparency. Other combinations of $Y_2O_3$, BN, CaO and MgO resulted in enough pores in the sintered specimens to have in-line transmittance only between 0% and 30%. The in-line transmittance reached over 80% after sintering at $1975^{\circ}C$ for 10 h for the specimen containing 0.15 wt% MgO, 0.08 wt% $Y_2O_3$ and 0.02 wt% BN.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.18 no.8
• /
• pp.970-976
• /
• 2007

This paper presents a novel polar transmitter architecture with a 2-bit sigma-delta modulator. In the proposed architecture, the 2-bit sigma-delta modulator is introduced to suppress quantization noise of conventional sigma-delta modulator. The power amplifier configuration is also modified in a binary form to accommodate the 2-bit digitized envelope signal. The Ptolemy simulation results of the proposed structure show that the spectral property is greatly improved in full transmit band of EDGE system. The fine quantization scheme of the 2-bit modulator lowers the noise level by 10dB without increasing the over-sampling ratio, which may be obtained if the over-sampling ratio increases twofold. Dynamic range is also enhanced up to 5dB owing to the new form of the power amplifier in the transmitter.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.65 no.6
• /
• pp.1083-1088
• /
• 2016

25.8kV GIS part generated by sensors to measure contact an inflow of noise depending on the extent of the measured discharge occurs often not easy. Partial discharge signal measurement sensor suitable for developing a more useful measurements at the scene to this, partial discharge waveform analysis developed a sensor, and to utilize forSensor on the development of the most important is VSWR decided to (voltage standing wave ratio) voltage standing-wave ratio less than 1.5 and decided less than at the full spectrum bands that are measured, this time Return loss, as measured value by absolute criteria 14.0 dB produced the sensor, designed to or more. UHF 1.5~0.5 GHz bandwidth spectrum to be measured in GIS. UHF bands were designed to be able to measure the best signal. Recently, 25.8kV GIS production company has been increasing variety of GIS were made open spacer in partial discharge in accordance with the not very easy to detect the signal. The sensor is designed height of four cm external spacer is attachment GIS in an influx of outside noise measurement, and be so manufactured as to facilitate the least we've done. Also, since partial discharge which occur can measure the frequency of the 170kV GIS external partial-discharge signals that occur at the scene of insulation applied to the spacer. Features, and also derived good results using global positioning. Also measured discharge point about sensors that are stable and the reliability of the development and local substation equipment failure occurring signal analysis through the discharge for the prevention of widely. There should be to believe that used.