• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.3 no.3
• /
• pp.107-116
• /
• 1983

This paper is concerned with the permeability through a decomposed granite soil layer which is influnced by change of grain sizes and crushed soils made by varied compaction energy. The change in the content of crushed soils can be described in terms of the ratio of surface area ($S_w{^{\prime}}/S_w $). The experiments were carried out to obtain the relationships of the coefficient of permeability(K) versus the optimum moisture content($w_{opt}$) by the variable head permeability test with the samples that were preapared by compaction test. The results are found as follows; (1) By the change in compaction energy, the crush ratio increased whereas the void ratio decreased with a larger maximum dry density running in parallel with the zero air void curve. (2) The ratio of surface area was $0.33(P)^{0.96}$ in $S_w{^{\prime}}/S_w $ with no relation to the compaction energy. (3) The grain size which produced the largest crush of soil particles ranged from 0.5 to 1 millimetre (4) The relationship of K versus $e^3$/1+e appeared as a straight line on the full-log-scale paper under the optimum moisture state. (5) As the compaction energy was larger, the passing percentage of #200-sieve grains increased linearly. The increment in the surface area ratio was deemed to have been caused by the decreased in the permeability.

• Proceedings of the KSR Conference
• /
• 2010.06a
• /
• pp.139-150
• /
• 2010

Recently, full-scale research about a passenger tube train system is being progressed as a next-generation transportation system in Korea in light of global green technology. The Korea Railroad Research Institute (KRRI) has commenced official research on the construction of a tube train system. In this paper, we studied various parameters of the tube train system such as the internal tube pressure, blockage ratio, and operating speed through computational analysis with a symmetric and elongated vehicle. This study was about the aerodynamic characteristics of a tube train that operated under standard atmospheric pressure (open field system, viz., ground) and in various internal tube environments (varying internal tube pressure, blockage ratio, and operating speed) with the same shape and operating speed. Under these conditions, the internal tube pressure was calculated when the energy efficiency had the same value as that of the open field train depending on various combinations of the operating speed and blockage ratio (the P-D relation). In addition, the dependence of the relation between the internal tube pressure and the blockage ratio (the P-${\beta}$ relation) was shown. Besides, the dependence of the relation between the total drag and the operating speed depending on various combinations of the blockage ratio and internal tube pressure (the D-V relation) was shown. Also, we compared the total (aerodynamic) drag of a train in the open field with the total drag of a train inside a tube. Then, we calculated the limit speed of the tube train, i.e., the maximum speed, for various internal tube pressures (the V-P relation) and the critical speed that leads to shock waves under various blockage ratios, which is related to the efficiency of the tube train (the critical V-${\beta}$ relation). Those results provide guidelines for the initial design and construction of a tube train system.

• Korean Journal of Environmental Agriculture
• /
• v.33 no.1
• /
• pp.57-62
• /
• 2014

BACKGROUND: Defoliation in grapevine cultivation is practically used to improve light environment within the canopy and thereby fruit quality. Effects of defoliation in five-year-old 'Pione' grapevine during cultivation with heating were investigated to find out optimum ratio of leaf area to fruit cluster weight (L/F). METHODS AND RESULTS: The grapevines were defoliated with berry-thinning 20 days after full bloom to provide various levels of L/F. At harvest, total leaf area values of fruit bearing branches were between 0.23 and $0.60m^2$. With increasing L/F, soluble solids and anthocyanin contents curvilinearly increased ($R^2=0.76^{**}$). At L/F over $0.6m^2/kg$, soluble solids content (SSC) leveled off. With increasing L/F, titratable acidity (TA) linearly decreased ($R^2=0.87^{**}$), but the ratio of SSC to TA linearly increased ($R^2=0.86^{**}$). Anthocyanin content was significantly correlated with SSC and the ratio of SSC to TA ($R^2=0.80^{**}$ and $0.82^{**}$, respectively). When total leaf area per fruit bearing branch was maintained $0.40m^2$, soluble solids and anthocyanin contents linearly decreased ($R^2=0.79^{**}$ and $0.85^{**}$, respectively), but TA linearly increased with increasing fruit cluster weight ($R^2=0.70^{**}$). Fruit was low in quality when the L/F was below $0.6m^2/kg$. CONCLUSION: L/F is recommended to be maintained at least $0.6m^2/kg$ in 'Pione' grapevine during cultivation with heating to produce higher-quality fruits.

• Journal of the Korea Concrete Institute
• /
• v.29 no.1
• /
• pp.43-51
• /
• 2017

As per current seismic design codes, diagonally reinforced coupling beams are restricted to coupling beams having aspect ratio below 4. However, a grouped diagonally reinforcement detail makes distribution of steel bars in the beam much harder, furthermore it may result in poor construction quality. This paper describes the experimental results of concrete coupling beam reinforced with high-strength steel bars (SD500 & SD600 grades). In order to improve workability for fabricating coupling beams, a headed large diameter steel bar was used in this study. Two full-scale coupling beams were fabricated and tested with variables of reinforcement details and aspect ratio. To reflect real behavior characteristic of the beam coupling shear walls, a rigid steel frame system with linked joints was set on the reaction floor. As a test result, it was noted that cracking and yielding of reinforcement were initially progressed at the coupling beam-to-shear wall joint, and were progressed to the mid-span of the coupling beam, based on the steel strain and failure modes. It was found that the coupling beams have sufficient deformation capacity for drift ratio of shear wall corresponding to the design displacement in FEMA 450-1. In this study, the headed horizontal steel bar was also efficient for coupling beams to exhibit shear performance required by seismic design codes. For detailed design for coupling beam reinforced with high-strength steel, however, research about the effect of variable aspect ratios on the structural behavior of coupling beam is suggested.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.53 no.4
• /
• pp.401-406
• /
• 2008

To select adoptable varieties in paddy soil with relatively high content of soil moisture, the growth characteristics and ginsenoside content of two-year-old ginseng was investigated in paddy soil with two types of drainage conditions such as poorly and imperfectly drained class, using 4 varieties, Cheonpoong (CP), Yeonpoong (YP), Hwangsookjong (HS) Jakyeongjong (JK). The ratio of survived plant in poor drainage conditions was higher than that in imperfect drainage conditions, and the ratio of discolored leaf in the former was lower than that in the latter. The ratio of survived plant was highest in HS, while lowest in YP. The ratio of discolored leaf was lowest in HS, while highest in YP among 4 varieties. Root weight per plant and yield were more distinctly decreased in poor drainage conditions than those in imperfect drainage conditions. Descending order of yield in poor drainage conditions was JK, CP, YP and HS, while CP, YP, JK and HS in imperfect drainage conditions. Varietal difference of rusty colored root was more distinct than that between poor and imperfect drainage conditions. The ratio of rusty colored root was relatively low in CP and JK, while high in YP and HS. Total ginsenoside content of two-year-old ginseng grown in poor drainage conditions was increased more than that in imperfect drainage conditions due to full growth of root. Regardless of different drainage conditions total ginsenoside content was highest in YP, while lowest in HS among 4 varieties, and there were no distinct difference between CP and JK.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.20 no.4
• /
• pp.7-11
• /
• 2006

In this paper, it is reported that film-bulk-acoustic resonator with high c-axis oriented AIN film on $Mo/SiO_2/Si(100)$ using metal-organic-chemical-vapor deposition was fabricated. The resonant frequency and anti-resonant frequency of the fabricated resonator were observed with 3.189[GHz] and 3.224[GHz], respectively. The quality factor and the effective electromechanical coupling coefficient(${k_{eff}}^2$) were measured with 24.7 and 2.65[%], respectively. The conditions of AIN deposition were substrate temperature of $950[^{\circ}C]$, pressure of 20Torr, and V-III ratio of 25000. A high c-axis oriented AIN film with $4{\times}10^{-5}[\Omega{cm}]$ resistivity of Mo bottom electrode and $4[^{\circ}]$ of AIN(0002) full-width at half-maximum(FWHM) on $Mo/SiO_2/Si(100)$ was grown successfully. The FWHM value of deposited AIN film is useful for the RF band pass filter specification for GHz-band wireless local area network.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.25 no.6
• /
• pp.533-540
• /
• 2012

Rubber laminated bearings with lead core are highly affected by changes in temperature because key materials which are rubber and lead have temperature dependencies. In this study, two full scale LRB(D800, S=5) are manufactured and temperature dependency tests on shear properties are accomplished. The shear properties at the 3rd cycle are used at $-10^{\circ}C$, $0^{\circ}C$, $10^{\circ}C$, $20^{\circ}C$, $30^{\circ}C$, $40^{\circ}C$ respectively. The double shear configuration, simultaneously testing two pieces, is applied for compression shear test in order to minimize the friction effects due to the test machine, described in ISO 22762-1:2010. Characteristic strength, post-yield stiffness, effective stiffness, equivalent damping ratio are estimated and presented coefficient due to the temperature changes.

• Journal of Korean Society on Water Environment
• /
• v.28 no.1
• /
• pp.63-70
• /
• 2012

This study was carried out to investigate change in influent concentration of domestic wastewater flowed from a newly constructed separate sewer system (SSS) and biological nutrients removal efficiency of a full scale Air-vent sequential batch reactor (SBR, $600m^3/d$). The average concentration of $BOD_5$, SS, T-N and T-P from SSS were 246.5 mg/L, 231.6 mg/L, 42.974 mg/L, 5.360 mg/L, respectively which corresponds to 2.2times, 1.2times, 1.8times and 2.1times higher than those from the conventional combined sewer system (CSS). The removal efficiency of $BOD_5$, SS, T-N, and T-P for the Air-vent SBR operated with influent from SSS averaged 99.1%, 99.0%, 91.2%, and 93.5%, respectively. Especially the respective nitrogen and phosphorus removal was 15% greater than that of the SBR operated with influent from CSS. Simultaneous nitrification and denitrification (SND) was observed in an aerobic reactor(II) as a result of DO concentration gradient developed along the depth by the Air-vent system. In order to achieve T-N removal greater than 90%, the C/N ratio should be over 6.0 and the difference between $BOD_5$ loading and nitrogen loading rate be over 100 kg/day (0.130 kg $T-N/m^3{\cdot}d$). Even with high influent T-P concentration of 5.360 mg/L from SSS (compared with 2.465 mg/L from CSS) T-P removal achieved 93.5% which was 15.5% higher than that of the SBR with influent from CSS. This is probably due to high influent $BOD_5$ concentration from SSS that could provide soluble carbon source to release phosphorus at anaerobic condition. In order to achieve T-P removal greater than 90%, the difference between $BOD_5$ loading and phosphorus loading rate should be over 100 kg /day (0.130 kg $T-N/m^3{\cdot}d$).

• Korean Journal of Agricultural Science
• /
• v.11 no.1
• /
• pp.85-93
• /
• 1984

This research was carried out to study the seed dormancy of radishes which were used for summer vegetation. The differences of dormancy of cultivars, maternal effects, the effect of full day length to mother plants, and the effects of chemical treatments for breaking the seed dormancy were considered for this study. These results sere summarized as follows; 1. The germination percentage of 7 cultlvars sown just after harvest were as follows;SP70-:0, PS11-:37.5, GJ75-:75.5, JD127-:77.5, YH85-:81.0, M55-:96.5, and JC73-:98.0%. 2. The dormany of $F_1$ seed of radish was severe when SP70-was used for mother plant. 3. Germination behavior was different by the maturity of plants grown for seed production. The dormancy of seed harvested from immature field-grown plants sown Nov. 10 was deeper than mature plants sown Mar. 22. 4. The germination ratio of tire seed of SP70-radish was increased by treatment of full day length to tire mother plant during full period of growing or since first flowering stage, while that was 0% by treatment since yellow ripening stage. 5. GA 200 ppm+thiourea 0.2% treatment was most effective for breaking of radish seed dormancy.

• Journal of Bio-Environment Control
• /
• v.17 no.4
• /
• pp.319-324
• /
• 2008

The sweet pepper (paprika) is one of the most important exported vegetable crops in Korea. This study evaluated the storability of sweet pepper fruits between 2 cultivars with different maturities under different storage conditions. The sweet peppers ('Special' and 'Fiesta') were grown in a rockwool hydroponic system, and harvested two different maturities: half-maturity and full-maturity levels. The sweet pepper fruits were stored in MA(non-ventilated) and non-MA(ventilated) conditions at 4 and $9^{\circ}C$ for 20 days. The storability of sweet pepper fruit was the highest in $4^{\circ}C$ MA conditions that remained 5% carbon dioxide and 10% oxygen during the storage. The ethylene concentration in MA condition showed $2{\sim}8{\mu}l/l$ regardless of storage temperatures, cultivars and maturities. The fruits packaged with non-ventilated film, showed lower weight loss, and higher firmness, and there was no different about decay ratio compared to the fruits packed ventilated film. The coloration of semi-matured fruit that colored 50% before storage progressed faster in non-ventilated packaging condition at $9^{\circ}C$, but their color did not changed as same as level of full-matured fruit. The electrolyte leakages and respiratory rate that estimated degree of chilling injury was highest in non-MA(ventilated) conditions of 'Special' full matured fruit placed at room temperature for 3 days following storage at $4^{\circ}C$ for 20 days. It may be suggested that sweet pepper fruit packed sealed (non-ventilated) film and stored at non-chilling temperature can be maintained better quality for long term storage.