• Journal of Korean Society of Steel Construction
• /
• v.26 no.2
• /
• pp.133-142
• /
• 2014

Double split tee connection is a full strength-partial restrained connection that suitable for ordinary moment frame and special moment frame which demonstrates behavior characteristics depending on the stiffness ratio of columns and beams, changes in the geometric shape of the T-stub, number of fasteners and effect of panel zone. For the double split tee connection to ensure structurally safe behavior, it needs to exhibit sufficient strength, stiffness and ductile capacity. This study sought to investigate the effects of the moment-rotation angle relationship of the double split tee connection and to evaluate the initial rotational stiffness of the double split tee connection depending on changes in the geometric shape of the T-stub. To this end, two different double split tee connection specimens are experimented which designed to change geometric parameter values (${\alpha}^{\prime}$) of the T-stub, and a three-dimensional finite element analysis was performed.

• Journal of IKEEE
• /
• v.7 no.1 s.12
• /
• pp.32-42
• /
• 2003

In this paper, radiation pattern of rectangular microstrip patch antenna with anisotropy substrates and superstrate is studied by using a rigorous full-wave approach and a moment method calculation. Dyadic Green's function is derived for selected anisotropy material by constitutive relation. From these results, integral equations of electric fields are formulated. The electric field integral equations are discretized into the matrix form by applying Galerkin's moment method and then the current coefficients are obtained.. After solving the current coefficients, the far-zone electric field in spherical coordinates can be obtained by using the stationary phase method. To verify the validity of numerical result, we compare our result with existing one and get a good agreement between them. From the numerical results, the radiation patterns for variation of uniaxial superstrate thickness, anisotropy ratio of substrate and superstrate layer are presented and analyzed.

• Journal of the Korean Society of Safety
• /
• v.30 no.6
• /
• pp.18-25
• /
• 2015

Computational study of a gravity current prior to the backdraft was conducted using fire dynamic simulator (FDS). Various initial conditions of mixture compositions and compartment temperature as well as four opening geometries (Horizontal, Door, Vertical, and Full opening) were considered to figure out their effects on the gravity current. The density difference ratio (${\beta}$) between inside and outside of compartment, the gravity current time ($t_{grav}$) and velocity ($v_{grav}$), and non-dimensional velocity ($v^*$) were introduced to quantify the flow characteristics of the gravity current. Overall fluid structure of the gravity current at the fixed opening geometry showed similar development process for different ${\beta}$ conditions. However, $t_{grav}$ for entering air to reach the opposed wall to the opening geometry increased with ${\beta}$. Door, Vertical, and Horizontal openings where openings are attached on the ground showed similar development process of the gravity current except for Horizontal opening, which located on the middle of the opening wall. The magnitude of $v_{grav}$ at fixed ${\beta}$ was, from largest to smallest, Full > Vertical > Door > Horizontal, but it depended on both the size and location of the opening. On the other hand, $v^*$ was found to be independent to ${\beta}$, and only depended on the geometry of the opening.

• Journal of Labour Economics
• /
• v.30 no.1
• /
• pp.109-137
• /
• 2007

One of the key features of the Korean labor market is that, even though the central axis of employment has shifted from manufacturing sector to service sector, the ratio of part-time work is very low. Its major reasons are low wage rate, insufficient fringe benefits including social insurance, and deficient job security, even though part-time work has positive characteristics. This study examines whether part-time work would be a decent one and an alternative to full-time work by answering two questions: one is who chooses part-time work and another is whether part-time work is satisfactory. Analyses of 3,971 wage workers in the 8th wave of the Korea Labor and Income Panel Survey reveal that, as expected, part-time work is prevalent among the young, married women, and the old supporting the results from previous studies and that choosing part-time work on one's initiatives has a significant positive effect on job satisfaction for women while it is not for men. Form the result, it can be concluded that part-time work can be an appropriate alternative for full-time work if one chooses it voluntarily.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.25 no.4
• /
• pp.29-37
• /
• 1983

This study was carried out not only to prepare available materials that can be utilized in basic planning of irrigation reservoirs, but also to contribute to the study on countermeasures for reasonable irrigation water development in Korea in the future, through the investigation for the structural characteristics of reservoirs and their change trend by an epoch. During this study 123 sites of sample reservoirs were analysed in their dimensions of physical constituent factors. The physical characteristics and their change trends revealed by this study are summarized as follows: 1. For the irrigation earth dam in Korea the correlation between dam volume (v) and dam height & length (H$^2$L) can be described as the formula of v=1. 434H2L~17, 300 (r=0. 933), from which embankment amount is assumed to be quickly estimated under determined dam height and length of the proposed reservoir. 2. The ratio of dam volume to dam height & length ranges approximately from 0.5 to 3 (1.7 in average), that of storage capacity to dam volume 2 to 10 (8.4 in average), that of irrigation area to full water surface area 5 to 20 (13 in average) and that of catchment area to irrigation area 2 to 5 (4 in average). Though correlation between dam volume and dam height & length is high, that between others is relatively low. 3. Average storage depth ranges approximately from 4m to l0m (6.6m in average), unit storage capacity 0. 4m to 0. 8m (0.54 in average) and shape factor of dam 5 to 20 (10.5 in average). 4. The more recently planned the reservoirs were, the less storage capacity, dam volume, full water surface and dam shape factor they have. 5. The more recently planned the reservoirs were, the larger storage depth and unit storage capacity they have.

• Journal of the Korean Geotechnical Society
• /
• v.27 no.12
• /
• pp.53-68
• /
• 2011

This paper presents the fundamental parameters for designing the NATM Composite Lining to be used in NATM tunnel construction. Firstly, the concept of NATM Composite Lining behaviour is introduced and reviewed in construction-performance. For the fundamental study, the optimal mix ratio tests and backfill material property tests to develop high-quality composite lining (PC panel lining) are fundamentally carried out. And the light-weight foamed mortar which is used for backfill material is developed. Full-scale loading tests to verify a performance of the NATM Composite Lining is also performed. From this research, it is clearly found that the NATM Composite Lining is very applicable method to considerably increase the stability and constructability of tunnel structure.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.8 no.3
• /
• pp.159-167
• /
• 2004

The objective of this study is development of the optimum design program to minimize the cost for PSC box girder bridge using the full staging method to indicate the necessity for the optimum design applied many types of bridges. It also considered the proper span length to girder depth ratio and the cell number along the width of bridge. This program used SUMT procedure and Kavlie's extended penalty function to allow infeasible design points in the process. Powell's direct method was used in searching design points and Gradient Approximate Method was used to reduce design hours. This study showed the convergence in design parameter and correlation of totally optimized cost according to cell numbers, span lengths, and lane numbers.

• Physical Therapy Korea
• /
• v.27 no.3
• /
• pp.171-177
• /
• 2020

Background: The flexion-relaxation phenomenon (FRP) refers to a sudden onset of activity in the erector spinae muscles that recedes or fades during full forward flexion of the trunk. Lumbar spine and hip flexion are associated with many daily physical activities that also impact trunk flexion. Shorter hamstring muscles result in a reduction of pelvic mobility that eventually culminates in low back pain (LBP). Many studies have explored the FRP in relation to LBP. However, few studies have investigated the influence of hamstring muscle length on the FRP in relation to the erector spinae muscles during trunk flexion. Objects: This study aimed to investigate the influence of hamstring muscle length on the FRP in relation to the erector spinae muscles during trunk flexion. Methods: Thirty subjects were divided into three groups according to hamstring length measured through an active knee extension test. The 30 participants consisted of 10 subjects who had a popliteal angle of 20° or less (Group 1), 10 subjects who had a popliteal angle of 21°-39° (Group 2), and 10 subjects who had a popliteal angle of 40° or more (Group 3). A one-way analysis of variance was used to compare the difference in muscle activity of the erector spinae muscles during trunk flexion. Results: The subjects with a shorter hamstring length had significantly higher muscle activity in their erector spinae muscles during trunk flexion and full trunk flexion (p < 0.05). The subjects with a shorter hamstring length also had a significantly higher flexion-relaxation ratio (p < 0.05). Conclusion: The results of this study demonstrate that differences in hamstring muscle length can influence the FRP in relation to the erector spinae muscles. This finding suggests that the shortening of the hamstring might be associated with LBP.

• The Korean Journal of Malacology
• /
• v.20 no.1
• /
• pp.65-73
• /
• 2004

Gametogenesis, changes of gonad bulk index (GBI), monthly variation in oocyte diameter, reproductive cycle and spawning with lunar cycle of the top shell, Trochus niloticus were investigated by histological examination. The specimens were sampled in the coastal waters of Chuuk Island, Micronesia, form November 1999 to September 2000. T. niloticus is a gonochorism, and the female and male were present in an approximately 1:1 ratio (p > 0.05). The ovary contained with the oocyte of yolk stage, the testis composed of the spermatid and spermatozoa at around the year. Monthly GBI were higher at February, March, April and June than the other months. Major spawning occurred between April and May, and June and July but the individuals of partially spawning were presented throughout the year. GBI with lunar cycle were higher at the full moon than the other lunar phase. These results suggest that the spawning occurred between the full moon and last quarter moon.

• Korean Journal of Medicinal Crop Science
• /
• v.7 no.1
• /
• pp.1-6
• /
• 1999

Basic informations for direct somatic embryo formation in Rehmannja glutinosa Lib. were obtained in 500ml erlenmyer flask. The ratio of ammonium to nitrate nitrogen of 825(mg/l) : 1900(mg/l) was proper condition for somatic embryo formation from stem and petiole explants and 3% sucrose was the most effective carbon source. Full strength MS medium with 2mg/l BA was better than LS medium for somatic embryogenesis. The initial pH 5.7 of medium(full strength MS with 2.0mg/l BA and 0.1mg/l NAA) was good for embryo production. Potassium ion was taken up rapidly within 2 weeks. while $Ca^{++}$ and $Mg^{++}$ ion contents were almost constant during culture period. Sucrose hydrolysis occurred throughout the culture, while glucose and fructose were absorbed simultaneously from the third week of culture.