• Proceedings of the KIPE Conference
• /
• 2012.11a
• /
• pp.99-100
• /
• 2012

본 논문은 마이크로 그리드에서 에너지 저장용 시스템으로 이용되는 슈퍼커패시터용 양방향 DC-DC 컨버터의 충전 및 방전시 효율을 고려한 변압기 권선비 설계에 관한 것이다. 충방전 시스템의 토폴로지는 Dual Full-Bridge 방식의 양방향 DC-DC 컨버터이다. 이 컨버터는 슈퍼커패시터의 충전 및 방전시의 스위칭 동작에 따라 벅 또는 부스트 모드로 동작하므로 동일한 출력 조건하에 권선비를 달리해가면서 모드별로 스위칭 손실을 계산하였으며, 손실이 최소로 되는 변압기의 권선비를 제시하고자 한다.

• Communications for Statistical Applications and Methods
• /
• v.10 no.3
• /
• pp.749-764
• /
• 2003

In this paper we explain that normal theory likelihood-ratio tests(z, t, $x^2$. F) for mean(s) or variance(s) can be geometrically related to volume of difference of two joint pdf's. One is an estimated joint pdf under null parameter space $\omega$ and the other is an estimated joint pdf under full parameter space $\Omega$. For explanations, ‘distance between two distributions’ is defined. We study properties of it, and derive some results on the distance between two multivariate normal distributions.

• Communications for Statistical Applications and Methods
• /
• v.10 no.3
• /
• pp.879-894
• /
• 2003

We evaluated the efficiencies of applying attribute selection methods and prior discretization to supervised learning, modelled by C4.5 and Naive Bayes. Three databases were obtained from UCI data archive, which consisted of continuous attributes except for one decision attribute. Four methods were used for attribute selection : MDI, ReliefF, Gain Ratio and Consistency-based method. MDI and ReliefF can be used for both continuous and discrete attributes, but the other two methods can be used only for discrete attributes. Discretization was performed using the Fayyad and Irani method. To investigate the effect of noise included in the database, noises were introduced into the data sets up to the extents of 10 or 20%, and then the data, including those either containing the noises or not, were processed through the steps of attribute selection, discretization and classification. The results of this study indicate that classification of the data based on selected attributes yields higher accuracy than in the case of classifying the full data set, and prior discretization does not lower the accuracy.

• Journal of the Optical Society of Korea
• /
• v.18 no.6
• /
• pp.698-705
• /
• 2014

We propose a new development for calculating a computer-generated hologram (CGH) through the use of multiple general-purpose graphics processing units (GPGPUs). For optimization of the implementation, CGH parallelization, object point tiling, memory selection for object point, hologram tiling, CGMA (compute to global memory access) ratio by block size, and memory mapping were considered. The proposed CGH was equipped with a digital holographic video system consisting of a camera system for capturing images (object points) and CPU/GPGPU software (S/W) for various image processing activities. The proposed system can generate about 37 full HD holograms per second using about 6K object points.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2006.08a
• /
• pp.1577-1582
• /
• 2006

Tandem OLED structures formed by connecting two or more low-voltage electroluminescent units (stacks) are effective for achieving high efficiency at low current density as well as long operational lifetime. We have fabricated white emitting tandem structures with two or three low-voltage white-emitting stacks using transparent organic "PN"-type connectors. Three- stack white tandem structures with efficiency greater than 24 cd/A at D65 and operational stability of about 110,000 h. (extrapolated) at $1000\;cd/m^2$ have been demonstrated. With a stacked structure, the power consumption for displays using an RGBW format can be reduced by 25% compared to previously described formulations. We have also fabricated advanced white tandem structures where the color gamut (NTSC x,y ratio) has been improved to greater than 70% using standard color filters. The white OLEDs can also be used to increase the colorrendering index CRI (>80%), an important consideration for solid-state lighting.

• Journal of Mechanical Science and Technology
• /
• v.19 no.9
• /
• pp.1821-1832
• /
• 2005

This study realizes the conceptual method to predict combustion instability in actual full-scale combustion chamber of rocket engines by experimental tests with model (sub-scale) chamber. The model chamber was designed based on the methodologies proposed in the previous work regarding geometrical dimensions and operating conditions, and hot-fire test procedures were followed to obtain stability boundaries. From the experimental tests, two instability regions are presented by the parameters of combustion-chamber pressure and mixture (oxidizer/fuel) ratio, which are customary for combustor designers. It is found that instability characteristics in the chamber with the adopted jet injectors can be explained by the correlation between the characteristic burning or mixing time and the characteristic acoustic time: In each instability region, dynamic behaviors of flames are investigated to verify the hydrodynamically-derived characteristic lengths of the jet injectors. Large-amplitude pressure oscillation observed in upper instability region is found to be generated by lifted-off flames.

• Journal of Advanced Marine Engineering and Technology
• /
• v.28 no.7
• /
• pp.1172-1177
• /
• 2004

This paper describes a output power control of magnetron for microwave oven. Magnetron is used extensively in household microwave oven and industrial microwave heating devices it is operated by 3000[V]～5000[V] dc high voltage. Power supply for driving magnetron is consisted of a bridge rectifier. HB(half bridge) inverter, full wave rectifier and gate drive circuit. In proposed system. we confirm that line input power can be controlled extensively and linearly to 24.56[%] by change of duty ratio of inverter through a experiment.

• Asian Journal of Turfgrass Science
• /
• v.3 no.2
• /
• pp.83-88
• /
• 1989

This Study was designed to know the growth Status under various photoperiod using Zoysia matrella. The experimental plots were split into such groups as control (full sunlight) 3hour, 6hour and 9hour photoperiod by three replication of completely randomized design. Chlorophyll content was analyized by mackine method and total soluble sugar by anthrone method. The result obtained from this experiment was as fol1 lows ; l. Dry weight was high in the control and 9hour plots. Its decrease remarkably occured in the short day plots 2. Leaf growth woes remarkaly decreased by short day condition. Six hour was considered as critical duration for leaf growth. 3. The growth of rhizome in the 9hour and control plots was good. New development of rhizome in the' short day plots was very slow compare to the control plot. 4. Chlorophyll content was high at l8 days after transplanting and then decreased. Its content in the short day plots severely decreased. 5. The content of soluble sugar in the control was low at early growth stage and high at late growth stage. It was found that the shorter the exposure time to sunlight, the higher the ratio of sugar content.

• Earthquakes and Structures
• /
• v.18 no.3
• /
• pp.379-390
• /
• 2020

Four full-scaled partially confined and unconfined masonry panels were tested with monotonic lateral loads. To study the effects of vertical force and boundary columns, two specimens with no boundary columns were subjected to different vertical forces, while two wing-wall specimens had the column placed eccentrically and in the middle, respectively. The specimens with no boundary columns exhibited ductile rocking behavior, where the lateral strength increased with increasing vertical compression. The wing-wall specimens with columns behaved as strut-and-tie systems. The column-panel interaction resulted in greater strength, lower deformation capacity and differences in failure modes. A comparison with analytical models showed that rocking strength can be accurately estimated using vertical force and the panel aspect ratio for panels with no boundary columns. The estimation for lateral strength on the basis of a panel section area indicated scattered error for wing-wall specimens.

• Proceedings of the IEEK Conference
• /
• 2001.10a
• /
• pp.296-300
• /
• 2001

In order to recycle the incineration ash (bottom ash and fly ash) generated from the incineration of municipal waste for a cement material, salts as well as heavy metal should be removed by the stabilization treatment. Most of these heavy metal and over 80% of salts are removed by a washing as a pre-treatment. However, wastewater which is another pollutant is generated by a washing, then proper treatment should be developed. First the characteristics of incineration ashes collected from two domestic full-sized incinerators were investigated and removal rate of salts and heavy metals from them also studied. The wastewater quality was compared to the criteria of the regulation by analyzing the characteristics of generated wastewater during the washing of incineration ash as a condition of liquid/solid ratio. Also, we tried to used this experimental results for the basic data to develop proper processing technique of municipal waste.