• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 2002.10b
• /
• pp.163-164
• /
• 2002

This paper describes a new carbon film that afford superlubricity (i.e, friction coefficients of 0.001- 0.005) and superlow wear rates (i.e., $10^{-11}-10^{-10}mm^3/N.m$) to sliding metallic and ceramic surfaces, when tested in inert test environments. The wear life of these films are more than 1000 km even under very high contact pressures (i.e., 1-3 GPa) and at a wide range of sliding velocities (i.e., 0.1 to 2 m/s). They are produced in a plasma enhanced chemical vapor deposition system at room temperature using highly hydrogenated gas discharge plasmas. Extensive research has shown that films grown in highly hydrogenated gas discharge plasmas (i.e., hydrogen-to-carbon ratio of 6 and above) provide superlow friction and wear coefficients. In full paper, specific conditions under which superlubricity can be achieved in carbon films will be discussed.and a mechanistic model will be proposed to explain the superlubricity of new carbon films.

• Structural Engineering and Mechanics
• /
• v.22 no.3
• /
• pp.351-370
• /
• 2006

In this study, the earthquake damage response of the concrete arch dams was investigated including dam-reservoir interaction. A continuum damage model which is a second-order tensor and includes the strain softening behavior was selected for the concrete material. Fluid-structure interaction problem was modeled by Lagrangian approach. Sommerfeld radiation condition was applied to the truncated boundary of reservoir. The improved form of the HHT-${\alpha}$ time integration algorithm was used in the solution of the equations of motion. The arch dam Type 5 was selected for numerical application. For the dynamic input, acceleration records of the 10 December 1967 Koyna earthquake were chosen. These records were scaled with earthquake acceleration scale factor (EASF) and then used in the analyses. Solutions were obtained for empty and full reservoir cases. The effects of EASF and damping ratio on the response of the dam were studied.

• Journal of the Korean Ceramic Society
• /
• v.53 no.3
• /
• pp.332-337
• /
• 2016

As a case study on yttria stabilized zirconia ceramics, the sintering characteristics of submicron powders and the granulation prepared by two-fluid spray drying of submicron particles were investigated. As-received powders of yttria stabilized zirconia particles were reduced to a uniform size of less than about 200 nm by repeated milling. Granulation size obtained by the two-fluid spray drying was affected by the organic matter and the primary particle size. Sintering behavior such as porosity, water absorption ratio, density, and transparency was influenced by processing conditions of the powder, and the discontinuous interfaces in a green body were reduced.

• The Bulletin of The Korean Astronomical Society
• /
• v.40 no.1
• /
• pp.71.2-71.2
• /
• 2015

We present the high-resolution near-infrared spectra of standard stars observed with Immersion Grating Infrared Spectrograph (IGRINS). IGRINS covers the full spectral range of H and K bands simultaneously with a high spectral resolution (R=40,000), revealing many previously undetected and/or unknown lines. In this work, we present preliminary results of spectroscopic diagnostics for stellar physical parameters. Our ultimate goal is to provide a library of near-infrared spectra of standard stars, which covers all spectral types and luminosity classes, with a high-resolution and high signal to noise ratio ($SNR{\geq}200$).

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.08a
• /
• pp.431-431
• /
• 2012

A compact tokamak reactor concept as a 14 MeV neutron source is desirable from an economic viewpoint for a fusion-driven transmutation reactor. LAR (Low Aspect Ratio) tokamak allows a potential of high "see full txt" operation with high bootstrap current fractions and can be used for a compact fusion neutron source. For the optimal design of a reactor, a radial build of reactor components has to be determined by considering the plasma physics and engineering constraints which inter-relate various reactor components and are constrained to use ITER physics and technology. In a transmutation reactor, the blanket should produce enough tritium for tritium self-sufficiency and the neutron multiplication factor, keff should be less than 0.95 to maintain sub-criticality. The shield should provide sufficient protection for the superconducting toroidal field (TF) coil against radiation damage and heating effects of the fusion neutrons, fission neutrons, and secondary gammas. In this work, characteristics of transmutation reactor based on LAR tokamak is investigated by using the coupled system analysis.

• Proceedings of the Earthquake Engineering Society of Korea Conference
• /
• 2002.03a
• /
• pp.203-210
• /
• 2002

The past bridge design specifications of Korea didn't include 1imitation on the amount of lap splices in the plastic hinge zone of piers, and so do current specifications. But these specifications include just limitation on the minimal length of lap splices. Thus, a large majority of non-seismically designed bridge piers may have lap splices in plastic hinge zone. In this study, model pier was selected among existent bridge piers whose failure mode is complex shear-flexure mode. Full scaled RC pier models whose aspect ratio is about 2.67 were constructed and quasi static test according to the drift level history was implemented. From the test results, effect of the lap splices on the seismic performance of bridges piers was analyzed, and the seismic capacity of the model bridges was evaluated by capacity spectrum method.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.35S no.11
• /
• pp.37-43
• /
• 1998

This paper proposes a new echo canceller that can be used in a full-duplex digital subscriber loop modem. The proposed echo canceller uses a NLMS-based parallel adaptation NLMS (PA-NLMS) algorithm. The PA-NLMS algorithm that an estimate of the nonstationarity to additive noise ratio (NNR) gained from two distinct NLMS processes is used to select the value of NLMS convergence-controlling parameter has been developed. Numerical results based on computer simulation show that the proposed algorithm has a convergence rate approaching that of the fastest possible NLMS process while improving on its MAC performance considerably.

• Proceedings of the KIPE Conference
• /
• 2011.11a
• /
• pp.195-196
• /
• 2011

본 논문은 높은 승,강압비를 가지는 배터리 충방전용 양방향 풀브리지 컨버터를 제안한다. 기존의 양방향 컨버터는 승강압비가 낮아 밧데리 방전시 발생된 전기에너지를 저항을 통해 방전 시켜서 운전하였다면, 본 논문에서 제안하는 방식은 밧데리 방전시 높은 승압비로부터 높은 DC 링크 전압을 얻어, 이 전압을 이용하여 계통으로 회생시킬 수 있도록 한 양방향 컨버터이다. 양방향 컨버터의 높은 승압비를 얻기 위해서 두 개의 DC-DC 컨버터를 입력 직렬, 출력 병렬 회로 형태로 연결하고, Battery 측을 Interleave 방식을 채택하여 전류 맥동을 줄이고, 높은 승강압비를 얻을 수가 있도록 하여, 배터리의 수명에 영향을 주는 전류리플을 감소하는 효과를 얻는다. 제안된 방식은 시뮬레이션을 통해 증명하였다.

• Annual Conference of KIPS
• /
• 2006.05a
• /
• pp.153-156
• /
• 2006

본 논문에서는 H.264 표준화 기구인 Joint Video Team(JVT) 권고안의 정수 단위 화소 움직임 예측을 위한 Unsymmetrical-cross Multi-Hexagon-grid Search(UMHexagonS) 알고리즘에서 Uneven Multi-Hexagon-grid Search(UMHGS) 부분을 개선한 알고리즘을 제안한다. 제안하는 알고리즘은 이전 프레임의 동일위치 또는 상위 모드에서 이미 선택된 움직임 벡터(MV: Motion Vector)를 이용하여 신호 대 잡음 비(PSNR: Peak Signal to Noise Ratio) 및 평균 비트 율(Average Bitrates)을 유지하면서, 현재 매크로블록의 검색영역을 줄이는 것이 가능하다. 제안하는 알고리즘의 성능은 Full Search Block Matching Algorithm(FSBMA) 및 UMHexagonS 알고리즘의 integer pel 에 대한 SAD(Sum of Absolute Difference) 연산횟수로 비교평가 하였다. 그 결과, FSBMA 에 비하여 평균 97.64%, UMHexagonS 에 비하여는 평균 17.48%의 연산횟수를 감소시키는 우수함을 보였다.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2003.10a
• /
• pp.81-86
• /
• 2003

This paper deals with the performance analysis and design of impulse turbine for OWC type wave energy plant. Numerical analysis was performed using a commercially-available software FLUENT. This parametric study includes the variation of several important parameters such as the number and shape of blades, hub ratio and tip clearance. Since parametric study at various flow coefficients requires considerable amount of computing tim, two-dimensional analysis was employed to find out optimum principal particulars in rather simple manner. Full three-dimensional calculation was also performed for several test cases to confirm the validity of two-dimensional approach. Up to the present stage, tentative result is well demonstrating the usefulness of 2-D analysis.