• Steel and Composite Structures
• /
• v.22 no.1
• /
• pp.141-159
• /
• 2016

Commonly in steel frames, steel beam and concrete slab are connected together by shear keys to work as a unit member which is called composite beam. When a composite beam is subjected to positive bending, flexural strength and stiffness of the beam can be increased due to "composite action". At the same time despite these advantages, composite action increases the strain at the beam bottom flange and it might affect beam plastic rotation capacity. This paper presents results of study on the rotation capacity of composite beam connected to Rectangular Hollow Section (RHS) column in the steel moment resisting frame buildings. Due to out-of-plane deformation of column flange, moment transfer efficiency of web connection is reduced and this results in reduction of beam plastic rotation capacity. In order to investigate the effects of width-to-thickness ratio (B/t) of RHS column on the rotation capacity of composite beam, cyclic loading tests were conducted on three full scale beam-to-column subassemblies. Detailed study on the different steel beam damages and concrete slab damages are presented. Experimental data showed the importance of this parameter of RHS column on the seismic behavior of composite beams. It is found that occurrence of severe concrete bearing crush at the face of RHS column of specimen with smaller width-to-thickness ratio resulted in considerable reduction on the rate of strain increase in the bottom flange. This behavior resulted in considerable improvement of rotation capacity of this specimen compared with composite and even bare steel beam connected to the RHS column with larger width-to-thickness ratio.

• Asian-Australasian Journal of Animal Sciences
• /
• v.6 no.1
• /
• pp.115-122
• /
• 1993

A study was conducted to compare the effect of feeding commercial formula ration and corn-soybean meal based rations on growth performance, feed conversion ratio, mortality percentage, dressing percentage, carcass composition and economics of raising broiler chicks at commercial farms. 3000 day old broiler chicks were randomly divided into 4 groups with 3 replicates of 250 birds in each. Four iso-nitrogenous and isocaloric rations (A, B, C and D) were prepared and randomly allotted to each group. Ration A was a commercial broiler ration whereas ration B had the same formula with the exception that all the animal protein sources were replaced with soybean meal (SBM). Ration C was based on only corn and SBM. Ration D contained corn, SBM and 25% fullfat soybean (FFSB). The birds were given the experimental rations starter from day 1 to 28 and finisher from 29 to 49. The results indicated that the birds fed on corn-soybean meal based rations gained significantly figher weights showed better feed conversion ratio, gave higher dressing percentage with better carcass composition, lower mortality and higher net profits as compared to those fed on commercial ration. The replacement of animal protein sources in commercial ration with SBM (ration B) although did not show any significant differences in the performance of birds as compared to ration A, a little improvement was visible indicating that SBM can be used as a good substitute of animal protein sources. Similarly the replacement of SBM with FFSB up to a level of 25% did not affect the broiler performance as compared to only SBM.

• Tunnel and Underground Space
• /
• v.11 no.1
• /
• pp.30-35
• /
• 2001

Focusing on the bench length, this paper presents the results of 3-dimensional elafto-plastic FE Analysis un tunnels of full face, mini-bench and short bench excavated in weathered rock. Influences of unsupported span, horizontal to vertical stress ratio, thickness of shotcrete on the behavior of rock and support were a1so studied. Results showed that displacements of mini-bench tunnels responded more sensitively to bench lengths than those of short bench. The effects of bench excavation on upper half displacement increased with longer unsupported span. Horizontal to vertical stress ratio showed a greater influence on displacement and preceding displacement ratio or sidewall rather than those of crown and invert.

• Physical Therapy Korea
• /
• v.16 no.1
• /
• pp.25-33
• /
• 2009

In dancers, intact muscular coordination is a well balanced antagonist, which could be a decisive factor in protection against injury as dancers often have hypermobile joints and their ankle joints often bear their full body weight in extreme positions. The purposes of this study were to identify the isokinetic strength to the knee and ankle and the isometric strength of the trunk in female collegiate dancers and controls. Furthermore, the study aimed to investigate the peak torque ratio of knee extension to flexion, ankle plantarflexion (PF) to dorsiflexion (DF), and dominant legs to nondominant. Twenty-one female collegiate dancers (20.0 years of age) and twenty-one female collegiate students (19.3 years of age) performed isokinetic maximum efforts of the knee extensors and flexors at $60^{\circ}/sec$ and $120^{\circ}/sec$, the ankle plantarflexors and dorsiflexors at $30^{\circ}/sec$ and $120^{\circ}/sec$ and isometric maximum efforts of the lumbar extensors at $0^{\circ}$, $12^{\circ}$, $24^{\circ}$, $36^{\circ}$, $48^{\circ}$, $60^{\circ}$, and $72^{\circ}$. The results were as follows: The isokinetic peak torque of the knee extensors and the ratio of knee extensors to flexors of dancers were significantly higher than those of controls (p<.01). However, the isometric peak torque of the back extensors (p<.01) and isokinetic peak torque of the ankle plantarflexors and dorsiflexors (p<.05) of dancers were significantly lower than those of controls. Further studies are needed to identify the difference in proprioception of the joints between dancers and controls.

• Food Science and Preservation
• /
• v.7 no.1
• /
• pp.44-50
• /
• 2000

Physicochemical properties and sensory evaluation of Satsuma mandarin produced in Cheju were investigated . Fruit index(width/Length), soluble solids and acid content of Citrus unshiu marc. var. miyagawa(miyagawa) and C. unshiu marc. var.(okitsu) harvested at 1st December were 1.16 and 1.23, 12.12 and 12.01, 0.97 and 1.09, respectively. and the fruit of miyagawa was showed somewhat round in shape, compared to ikitsu. the taste of miyagawa seemed to be better than okitsu. However, compared to miyagawa, peel thickness was thinner, flesh ratio was higher, and firmness was higher as 0.502kg-force in kitsu. Nevertheless there were some differences among panelist groups in sensory evaluation , middle size of citrus fruits were favorable to most panelists, but except very small or very large size of fruits, there were not so much differences in okitsu. The panelists referred to somewhat flat-shaped fruits from that sensory evaluation score was increased to 1.3 in fruit index. nevertheless there were not so much differences in full-colored fruits, the citrus peel color of reddish yellow was more favorable than greenish or pale yellow color. the score was increased more linearly according to citrusfruit produced in optimum ciltivation area, and was prefered to thinner in peel thickness , Correlation between soluble solids, acid content , Brix/acid ratio and flesh ratio with sensory evaluation score were not showed significantly, it was different to with citrus juice. This data obtained in this experiments are supposed to be applied to the quality evaluation of Satsuma mandarin produced in Cheju .

• Journal of Welding and Joining
• /
• v.35 no.2
• /
• pp.43-51
• /
• 2017

The automatic welding systems, have received much attention in recent years, because they are highly suitable not only to increase the quality and productivity, but also to decrease manufacturing time and cost for a given product. Automatic welding work in semiconductor or space industry to be carried out in pipe line and butt joint mostly and plasma arc welding(PAW) is actively applied. To get the desired quality welds in automated welding system is challenging, a mathematical model is needed that has complete control over the relevant process parameters in order to obtain the required mechanical properties. However, In various industries the welding process mathematical model is not fully formulated for the process parameter and on the welding conditions, therefore only partial variables can be predicted. Therefore, this paper investigates the interaction between the welding parameters and mechanical properties for predicting the weld bead geometry by analyzing the S/N ratio.

• Journal of Korean Association for Spatial Structures
• /
• v.9 no.3
• /
• pp.59-66
• /
• 2009

Dynamic characteristics such as frequency and damping ratio in the ambient state of building has been progressed in domestic and foreign. However, there has not been any deep research of dynamic characteristics of full-scale structure using vibration measurement of the building damaged up to failure. Dynamic characteristics of three-story reinforced concrete building was evaluated before and after it was damaged by using a actuator. Dynamic characteristics is reviewed and compared with previous study. Ambient vibration and human excitation test were applied. After 120mm horizontal displacement by actuator, frequency of long and short direction is reduced to 34.3%, 33.7% and damping ratio is reduced to 36.5%, 19.5% respectively.

• The Journal of the Acoustical Society of Korea
• /
• v.35 no.2
• /
• pp.102-109
• /
• 2016

This paper proposes a noise suppression method through SNR (Singal-to Noise Ratio) estimation in the two microphone array environment of close spacing. The conventional method uses a noise suppression method for a gain function obtained through the SNR estimation based on coherence function from full band. However, this method cause performance decreased by the noise damage that affects all the feature vector component. So, we propose a noise suppression method that allocates a frequency domain signal into N constant multi frequency band and each frequency band gets a gain function through SNR estimation based on coherence function. Performance evaluation of the proposed method is shown by comparison with PESQ (Perceptual Evaluation of Speech Quality) value which is an objective quality evaluation method provided by the ITU-T (International Telecommunications Union Telecommunication).

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• v.1
• /
• pp.179-184
• /
• 2006

Rapid and high-precision positioning with a Global Navigation Satellite System (GNSS) is feasible only when very precise carrier-phase observations can be used. There are two kinds of mathematical models for ambiguity resolution. The first one is based on both pseudorange and carrier phase measurements, and the observation equations are of full rank. The second one is only based on carrier phase measurement, which is a rank-defect model. Though the former is more commonly used, the latter has its own advantage, that is, ambiguity resolution will be freed from the effects of pseudorange multipath. Galileo will be operational. One of the important differences between Galileo and current GPS is that Galileo will provide signals in four frequency bands. With more carrier-phase data available, frequency combinations with long equivalent wavelength can be formed, so Galileo will provide more opportunities for fast and reliable ambiguity resolution than current GPS. This paper tries to investigate phase only fast ambiguity resolution performance with four Galileo frequencies for short baseline. Cascading Ambiguity Resolution (CAR) method with selected optimal frequency combinations and LAMBDA method are used and compared. To validate the resolution, two tests are used and compared. The first one is a ratio test. The second one is lower bound success-rate test. The simulation test results show that, with LAMBDA method, whether with ratio test or lower bound success rate validation criteria, ambiguity can be fixed in several seconds, 8 seconds at most even when 1 sigma of carrier phase noise is 12 mm. While with CAR method, at least about half minute is required even when 1 sigma of carrier phase noise is 3 mm. It shows that LAMBDA method performs obviously better than CAR method.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.8
• /
• pp.1934-1939
• /
• 2013

In this paper, we consider the online scheduling problem of jobs with deadlines. The jobs arrive over time and the scheduling algorithm has no information about the arriving jobs in advance. The jobs have the processing time of the equal length and the goal of the scheduling algorithm is to maximize the number of jobs completed in their deadlines. The performance of the online algorithm is compared with that of the optimal algorithm which has the full information about all the jobs. The raio of the two performances is called the competitive ratio. In general, the ratio is unbouned. So the case that the online algorithm can have more resources than the optimal algorithm is considered, which is called the resource augmentation analysis. In this paper, the online algorithm have more machines. We show that the online algorithm can have the same performance as the optimal algorithm.