• Journal of Advanced Marine Engineering and Technology
• /
• v.29 no.4
• /
• pp.443-452
• /
• 2005

The purpose of this study is experimentally to analyze the effects of intake port swirl, injection system and turbocharger on the engine performance and the emission characteristics in a V8 type turbocharger intercooler D.I. diesel engine of the displacement 16.7L, and to suggest the improvement of engine performance. Generally to enhance engine power, TCI diesel engine is put to practically use turbocharged intercooler in order to increase volume efficiency which is cooled boost air. As results of considering the factors of the intake port of swirl ratio 2.25, compression ratio 17.5. re-entrant $8.5^{\circ}$ combustion bowl, nozzle hole diameter ${\phi}0.33{\ast}3+{\phi}0.35{\ast}2$. nozzle protrusion 3.18mm, injection timing BTDC $12^{\circ}CA$ and turbocharger(compressor 0.6A/R+46Trim. turbine 1.0 A/R+57Trim) is the best in the full load in the engine performance and the exhaust characteristics of NOx concentration. Therefore. their factors are appropriated as intake system, injection and turbocharger system.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2012.05a
• /
• pp.211-212
• /
• 2012

ZnO submicron particles were grown on Au-catalyzed Si substrate by a vapor phase transport (VPT) growth process under different mixture gas ratio at growth temperature of $900^{\circ}C$. The structural and optical properties of the ZnO submicron particles were investigated by field-emission scanning electron microscopy (FE-SEM), X-ray diffraction (XRD), and photoluminescence (PL). The ZnO submicron particles could be clustered with the $O_2/Ar$ mixture gas ratio(%) higher than 10%, and it was mainly determined by the gas ambient. Particularly, when the $O_2/Ar$ mixture gas ratio was 30%, it was observed the ZnO submicron particles with diameters in the range of 125 to 500 nm and the narrowest full width at half maximum (FWHM) of XRD and PL spectra with $0.121^{\circ}$ and 92 meV, respectively. It was found that the structural and optical properties of the ZnO submicron particles were improved with increasing the $O_2/Ar$ mixture gas ratio through the XRD and PL spectra.

• Journal of Korean Society of Forest Science
• /
• v.106 no.1
• /
• pp.33-39
• /
• 2017

This study was carried out in order to closely examine the growth and the physiological response by shading levels of a container seedling of Daphniphyllum macropodum which is known as the species of having shade tolerance in a warm temperature evergreen broad-leaved tree. The shading treatment was regulated with the shading level of full sunlight, and 35%, 55%, 75% of full sunlight. As a result of surveying the height and the root collar diameter growth by the shading level, the height was the highest with 13.2 cm under 35% of shading. The root collar diameter was the highest with 4.99 mm under full sunlight. The organ-based (leaves, shoot and root) dry mass production and the whole dry mass production were higher with 1.38 g, 0.47 g, 0.87 g, 2.72 g, respectively, in order of 35% shading. As for chlorophyll a, b, and the total chlorophyll content, the highest chlorophyll content was shown under 75% of shading with the relatively highest shading level. The ratio of chlorophyll a to chlorophyll b (a/b) was the highest under 35% of shading. The photosynthetic rate, stomatal conductance and water use efficiency were the highest with $12.3{\mu}molCO_2{\cdot}m^{-2}{\cdot}s^{-1}$, $0.27molH_2O{\cdot}m^{-2}{\cdot}s^{-1}$, $3.53{\mu}molCO_2{\cdot}mmol^{-1}H_2O$, respectively, under 35% of shading. As a result of surveying the whole experiment, D. macropodum grows nicely by maintaining 35% shading.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.15 no.2
• /
• pp.30-35
• /
• 2011

Purpose: The Boramae Hospital are currently using Wide beam reconstruction (WBR: UltraSPECT, Israel) to improve the resolution. The Xact-bone belongs to the WBR. It has been reported that Xact-bone helps us to improve image resolution and contrast. This study will be evaluated clinical usefulness of Xact-bone method. Materials and Methods: The usefulness evaluation of Xact-bone method was analyzed in resolution test and contrast ratio. The resolution test in Planar image were obtained from Full width at half maximum (FWHM) by using capillary tube. And the contrast ratio was obtained from Bone and Soft tissue (B/S) ratio values that were acquired from bone scan study of 50 patients before and after using the Xact-bone method. We prepared the Triple Line Source Phantom, NEMA IEC Body Phantom and Standard Jaszczak Phantom to acquire the FWHM and Contrast Ratio values of Single photon emission computed tomography (SPECT) image. Subsequently we compared among the Filtered backprojection (FBP), Orderd subset expectation maximization (OSEM) and Xact-Bone image. Results: The results of the planar Xact-bone data improved resolution about 20% by using capillary tube. In addition it was improved B/S ratio about 15%. When using Triple Line Source Phantom, SPECT Xact-bone data improved resolution for both FBP, OSEM methods about 20% and 10%, respectively. Contrast ratio in each spheres has also been increased for both methods that using NEMA IEC body Phantom and Standard Jaszczak Phantom. Conclusion: When we were using Xact-bone method, we could see to improve the resolution and Contrast ratio as compared to do not use the Xact-bone method. Accordingly, by using WBR's Xact-bone method is expected to improve the image quality. However, when introducing new software, it is needed to match the characteristics of the hospital protocol and clinical application.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.10 no.4
• /
• pp.149-157
• /
• 2008

We investigated chlorophyll contents and growth performances of five deciduous hardwood species growing in central temperate zone of Korean forest. Cornus controversa, Fraxinus rhynchophylla, Betula schmidtii, Prunus leveilleana, and Acer mono seedlings were grown under four different light intensity regime (full sunlight, $65{\sim}72%$, $29{\sim}40%$, and, $7{\sim}12%$ of the full sunlight) for the experiment. The chlorophyll contents of all of the species were highest in $7{\sim}12%$ of the full sunlight, while lowest under the full sunlight. The relative growth rate of root collar diameter and height were decreased with increasing shading level except for Acer mono that showed the highest relative growth rate under $29{\sim}40%$ of the full sunlight. Total biomass and root volumes of the seedlings studied decreased as the light intensity decreased with different shade levels. For Acer mono, however, the biomass and root volumes were highest in $29{\sim}40%$ of the full sunlight. The relative growth rate of root comparing to shoot decreased as shading increased, and as a result, the ratio of aboveground to belowground biomass increased. As the shading level increased, specific leaf area (SLA), leaf area ratio (LAR), and leaf weight ratio (LWR) of most species increased.

• Korean Journal of Agricultural Science
• /
• v.14 no.2
• /
• pp.384-395
• /
• 1987

This paper aims to identify the class characteristics of tenants. To this end Patnaik's model is selected, because this model is most reasonable for sorting class structures of tenants. In his Model, "labor-exploitation criterion" is the main criterion for identifying class status. According to this criterion, there are five rural classes i.e. landlord, rich peasant, middle peasant, poor peasant, and full-time laborer. "Net labor ratio" is used for this purpose as empirical data handling. Net labor ratio is a ratio of net labor hired in to family labor, if hired in labor is more then this ratio is positive, and if hired out labor is more then the ratio is negative. Hired in and hired out labor includes not only direct labor but indirect labor such as labor employment or sales through rent. The results of this study are summarized as First, almost all tenants and owner cultivators are of the middle peasant class. Second, there are no rich peasant among the tenants, but 5% of owner cultivators are rich peasants, and 10% of tenants are poor peasants, owner cultivators are 1%. Third, the net: labor ratio of tenants is -0.211, and that of owners is 0.143. There are differences between tenants and owner cultivators even if land is much the same, and owner cultivators net labor ratio is positive except in the land size of 0.3-0.5ha, but that of the tenants' is negative. Fourth, proto-labor poor peasants earned 25% of income from labor, compared with under 10% of proto-tenant poor passant's. Rent to income ratio is almost 60% of proto-tenant, 27% of proto-labor among poor peasants.

• Journal of the Architectural Institute of Korea Structure & Construction
• /
• v.35 no.5
• /
• pp.191-202
• /
• 2019

This study examines the effect of luminance contrast ratio of character on readability and visual fatigue during an hour-long reading session while using a tablet PC in ambient environments having low luminance limited to $25cd/m^2$. Experiments were conducted with four patterns of the tablet's luminance contrast ratio of characters, namely 1:2.5, 1:4.5, 1:6.5, and 1:8.5, in low ambient luminance of $9cd/m^2$ and $25cd/m^2$. The obtained results show that the characters can be easily read at the luminance contrast ratio of character of 1:8.5 under surface luminance of $25cd/m^2$. Visual fatigue was evaluated through a subjective survey of symptoms. Physical, psychological, and visual fatigue were observed at a surface luminance of $9cd/m^2$, whereas solely visual fatigue was felt at a surface luminance of $25cd/m^2$. By assessing the physical fatigue using the value, it has been found that smaller the luminance contrast ratio of character, greater is the CFF variation rate. Furthermore, readability is poor and visual fatigue can be observed when the surface luminance is lower than the ambient luminance. However, readability can be improved by increasing the luminance contrast ratio of character to a value of 1:8.5. Thus, in low luminance environments, luminance contrast ratio of characters can affect readability and fatigue. Consider providing the full form of "CFF" so that the acronym can be used unambiguously throughout the manuscript.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.6
• /
• pp.1405-1410
• /
• 2015

In this study we designed the radiation-hardened sensor signal processing modules that can be commonly used for a variety of sensors during normal operation and even in high-radiation environments caused by an accident. First development module was designed to receive the change of the R and C value from the sensors and to process the signal as a PWM modulation scheme. This module was assessed to have ± 10% error to the Full-Scale in the radiation test in the range of 12 kGy TID. The main cause of the error was analyzed as the annealing of the common circuit in the switching element and the consequent increase in the duty ratio of the pulse width modulation circuit according to the radiation dose increasement. The redesigned module for higher radiation resistivity with Stub transistor circuit was found to have less than 5% error to the Full-scale from the radiation test results for 20.7 kGy TID range.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.1
• /
• pp.52-57
• /
• 2016

We introduce a hybrid scheduling in a multi-path poor scattering full-duplex (FD) system, which consists of one multi-antenna FD base station and a large number of single-antenna half-duplex mobile stations. Our hybrid scheduling utilizes partial channel state information at the transmitter. In particular, unlike the conventional scheduling method using opportunistic transmission for both uplink and downlink, the proposed scheme combines a random transmit beamforming for downlink and a zero forcing beamforming for uplink. As our main result, via computer simulations, it is shown that the proposed scheme has a superior sum-rate performance than that of the conventional scheduling method beyond a certain signal-to-noise ratio regime.

• Journal of Satellite, Information and Communications
• /
• v.9 no.1
• /
• pp.13-16
• /
• 2014

In applying LCD to TV application, one of the most significant factors to be improved is image sticking on the moving picture. LCD is different from CRT in the sense that it's continuous passive device, which holds images in entire frame period, while impulse type device generate image in very short time. To reduce image sticking problem related to hold type display mode, we made an experiment to drive TN-LCD like CRT. We made articulate images by fast refreshing images, and we realized the ratio of refresh time by counting between on time and off time for video signal input during 1 frame (16.7ms). Conventional driving signal cannot follow fast on-off speed, so we evaluated new signal generator using SDI (Serial Data Interface) mode signal generator. We realized articulate image generation similar to CRT by high fast full HD (High Definition) signals and TN-LCD overdriving. As a result, reduced image sticking phenomenon was validated by naked eye and response time measurement.