• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.34 no.1
• /
• pp.90-94
• /
• 2008

The purpose of this study was to investigate the effects of immediate non-functional loading by analyzing histomorphology around the implant tissues in dogs. Five eight- to nine-month-old full-grown dogs weighing around 12 kg were used in the study. Group I (control group) comprised those in which delayed loading was applied to the right side of the mandible, and Group II (experimental group) consisted of dogs in which immediate loading was performed on the left side of the mandible. Resorbable blast media (RBM)-treated double-threaded US III implants measuring 3.5 mm in diameter and 11 mm long were used in the study. Each animal received four implants in each group, for a total of 40 implants. Cemented type abutments were used after implantation. An 8-week period was allowed for bone healing and an abutment was placed after exposing the periosteum for loading. An implant sample was obtained from bone blocks taken when the dogs were killed at 16 weeks after loading. A Mann-Whitney U-test was performed to evaluate statistical significance. Student's t-test was used for the histological evaluation. The bone formation ratio in Groups 1 and 2 was 88.23 and 86.41%, respectively. No significant difference in new bone formation was observed in the two groups. As no significant difference was seen in new bone formation between the delayed and immediate loading groups, early loading might be possible after implant placement.

• Journal of Periodontal and Implant Science
• /
• v.44 no.6
• /
• pp.280-287
• /
• 2014

Purpose: The purpose of this randomized single-blind controlled trial was to elucidate the clinical and antimicrobial effects of daily phototherapy (PT) as an adjunct to scaling and root planing (SRP) in patients with chronic periodontitis. Methods: The study was conducted from December 2013 to May 2014 at Ewha Womans University Mokdong Hospital, Seoul, Korea. Forty-one patients with mild to moderate chronic periodontitis were randomly divided into two therapeutic groups in a 1:1 ratio: SRP+PT and SRP (control) groups. All participants underwent full-mouth SRP. PT was performed thrice a day for a month by using electric toothbrushes with embedded light-emitting diodes. Plaque index, gingival index, probing pocket depth (PPD), clinical attachment level (CAL), and bleeding on probing were assessed before (baseline) and four weeks after (follow-up) the treatment. Aggregatibacter actinomycetemcomitans, Porphyromonas gingivalis, Tannerella forsythia, Treponema denticola, Prevotella intermedia, Fusobacterium nucleatum, Parvimonas micra, Campylobacter rectus, Eikenella corrodens, Streptococcus mutans, and Streptococcus sobrinus levels were detected by a real-time polymerase chain reaction at the same points in time. Results: The clinical parameters improved in both the groups. At the follow-up assessment, PPD was significantly decreased in the SRP+PT group (P=0.00). Further, PPD and CAL showed significantly greater changes in the SRP+PT group than in the SRP group (PPD, P=0.03; CAL, P=0.04). P. gingivalis and T. forsythia levels decreased in this group, but no significant intergroup differences were noted. Conclusions: Adjunctive PT seems to have clinical benefits, but evidence of its antimicrobial effects is not sufficient. Long-term studies are necessary to develop the most effective PT protocol and compare the effectiveness of PT with and without exogenous photosensitizers.

• Journal of Periodontal and Implant Science
• /
• v.43 no.2
• /
• pp.96-100
• /
• 2013

Purpose: Chronic periodontitis (CP) seems to be associated with stress and depression, but little information on this possible association is available in the literature. Thus, the objective of this study was to evaluate the association among stress, the salivary cortisol level (SCL), and CP. Methods: Seventy systemically healthy subjects were included in the study from January to September 2011. Full medical and dental histories were obtained, and the following measurements were recorded: 1) probing depth; 2) clinical attachment level; 3) bleeding on probing; and 4) tooth mobility. Saliva samples were collected for the evaluation of SCL (via a highly sensitive electrochemiluminescence immunoassay), and all subjects also answered a questionnaire (i.e., the Zung Self-rating Depression Scale). The odds ratio (OR) with a 95% confidence interval (CI) was calculated, and one way analysis of variance and the Tukey-Kramer method were performed. Results: A total of 36 subjects with CP (51.4%) and 34 without CP were evaluated. Of them, all of the subjects with CP and one periodontally healthy subject were diagnosed with depression. Subjects with moderate CP had statistically significantly higher levels of SCL than subjects with a diagnosis of slight CP (P=0.006). Also, subjects with severe CP showed the same outcome when compared to those with slight CP (P=0.012). In addition, 46 subjects presented high SCL whereas 24 had a normal level. CP was found to be correlated with the SCL, with an OR of 4.14 (95% CI, 1.43 to 12.01). Conclusions: Subjects with a high SCL and depression may show an increased risk for CP.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.23 no.4
• /
• pp.293-302
• /
• 2007

I. Objectives The purpose of this study was to compare the shaping ability between the single length technique performed with Mtwo instruments (VDW, Munich, Germany) and the crown-down technique using K3 (SybronEndo, West Collins, CA, USA) and RaCe (FKG, La Chaux-de-Fonds, Switzerland) instruments. II. Materials & Methods Forty five curved canals in resin blocks were equally divided in to three groups. Group 1 (Mtwo) was instrumented used the full length of canal according to the manufacturer's instructions. The simulated canals was prepared to an instrument size of 35, 0.04 taper canal terminus. In group 2 (Race) and group 3 (K3) was instrumented in a crown-down manner and prepared to an instrument size of 30, 0.06 taper canal terminus. Pre- and post-instrumentation images were scanned and assessment of canal shape was completed with a computer image analysis program. Material removal was measured at 7 measuring points, beginning 1mm from the end point of preparation. Differenced of centering ratio were statistically analyzed using One-way ANOVA followed by Duncan's test. II. Results & Conclusion There was no significant difference on 1, 2, 3 and 7mm measuring point. At 4 and 5 measuring point, significant difference showed between the Mtow instruments and other two instruments. (p<0.05)

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.4
• /
• pp.678-691
• /
• 2015

Internet and mobile traffic continues to surge exponentially in recent years due to popularization of smart devices, the appearance of various internet services carrying large amount of traffic from richer content and applications. This phenomenon leaded to various network problems such as the congestion delay, the non-balanced traffic ratio between ISPs, the continuous network investment cost and the Internet access problems. In light of changed data-driven communication ecosystem, There are growing concerns by both academia and industry that settlement-free peering and full transit regime have the limitations such as not only difficulties in maintaining mutual benefits but also difficulties in securing investment incentives for upgrading network performance and quality. Thus, it becomes more necessary for introducing the evolved internet interconnection regime which can fulfill the All-IP network environment. This study derives core issues regarding internet interconnection regime in Korea and suggest new evolved alternatives based on three point of view(traffic optimization, cost optimization, network investment optimization) through the empirical analysis.

• Steel and Composite Structures
• /
• v.35 no.4
• /
• pp.475-494
• /
• 2020

Presented are experimental results from 24 full-scale push test specimens to study the behaviour of composite beams with trapezoidal profiled sheeting laid transverse to the beam axis. The tests use a single-sided horizontal push test setup and are divided into two series. First series contained shear loading only and the second had normal load besides shear load. Four parameters are studied: the effect of wire mesh position and number of its layers, placing a reinforcing bar at the bottom flange of the deck, normal load and its position, and shear stud layout. The results indicate that positioning mesh on top of the deck flange or 30 mm from top of the concrete slab does not affect the stud's strength and ductility. Thus, existing industry practice of locating the mesh at a nominal cover from top of the concrete slab and Eurocode 4 requirement of placing mesh 30 mm below the stud's head are both acceptable. Double mesh layer resulted in 17% increase in stud strength for push tests with single stud per rib. Placing a T16 bar at the bottom of the deck rib did not affect shear stud behaviour. The normal load resulted in 40% and 23% increase in stud strength for single and double studs per rib. Use of studs only in the middle three ribs out of five increased the strength by 23% compared to the layout with studs in first four ribs. Eurocode 4 and Johnson and Yuan equations predicted well the stud strength for single stud/rib tests without normal load, with estimations within 10% of the characteristic experimental load. These equations highly under-estimated the stud capacity, by about 40-50%, for tests with normal load. AISC 360-16 generally over-estimated the stud capacity, except for single stud/rib push tests with normal load. Nellinger equations precisely predicted the stud resistance for push tests with normal load, with ratio of experimental over predicted load as 0.99 and coefficient of variation of about 8%. But, Nellinger method over-estimated the stud capacity by about 20% in push tests with single studs without normal load.

• Animal cells and systems
• /
• v.16 no.6
• /
• pp.469-478
• /
• 2012

Sex hormones have long been considered to play an important role in bone turnover rate, periodontal diseases, and wound healing. We have studied the effect of porcine testis steroid extract (PTSE), an extract of porcine testes, which holds a good ratio of 19-nortestosterone (nandrolone), testosterone, androstenedione, $17{\beta}$-estradiol, and estrone, on the healing rate of a standardized full-thickness linear wound on the back of the rat. Skin punch or carbon dioxide ($CO_2$) laser methods were used to create the deep skin injury in two groups of animals. The animals were treated with the PTSE cream, control cream and Vaseline (control) to find out the effect in re-epithelialization, contraction, and formation of granulation and scar tissues. Histological examination after 21 days showed 100, 87.4, and 80.5% recovery of epidermis, dermis, and hypodermis, respectively in the PTSE-treated animals. Similarly, on the 15th day of treatment, complete healing of intact skin was observed in the PTSE cream-treated animals among the laser radiation group. Even though the beginning of re-epithelialization phase and completion of serum crust formation was also observed in the base cream- and Vaseline-treated animals respectively, the complete healing cycle was observed only in the PTSE-treated group. The white blood cell count in the PTSE-treated group showed that PTSE cream is nontoxic to animals.

• Nuclear Engineering and Technology
• /
• v.46 no.5
• /
• pp.633-640
• /
• 2014

In this research, the surface roughness affecting the pressure drop in a pipe used as the steam generator of a PWR was studied. Based on the CFD (Computational Fluid Dynamics) technique using a commercial code named ANSYS-FLUENT, a straight pipe was modeled to obtain the Darcy frictional coefficient, changed with a range of various surface roughness ratios as well as Reynolds numbers. The result is validated by the comparison with a Moody chart to set the appropriate size of grids at the wall for the correct consideration of surface roughness. The pressure drop in a full-scale U-shaped pipe is measured with the same code, correlated with the surface roughness ratio. In the next stage, we studied a reduced scale model of a U-shaped heat pipe with experiment and analysis of the investigation into fluid-structure interaction (FSI). The material of the pipe was cut from the real heat pipe of a material named Inconel 690 alloy, now used in steam generators. The accelerations at the fixed stations on the outer surface of the pipe model are measured in the series of time history, and Fourier transformed to the frequency domain. The natural frequency of three leading modes were traced from the FFT data, and compared with the result of a numerical analysis for unsteady, incompressible flow. The corresponding mode shapes and maximum displacement are obtained numerically from the FSI simulation with the coupling of the commercial codes, ANSYS-FLUENT and TRANSIENT_STRUCTURAL. The primary frequencies for the model system consist of three parts: structural vibration, BPF(blade pass frequency) of pump, and fluid-structure interaction.

• Journal of the Korean Solar Energy Society
• /
• v.28 no.3
• /
• pp.60-66
• /
• 2008

This study is to investigate an optimal size and position of PV system for apartment complex through the electrical load matching analysis. The 4 types of arrangements of apartment buildings are considered as follows; ㅡtype, alternative ㅡtype, ㄱtype and ㅁtype. We assume that the studied site is composed of 9 buildings. Firstly, solar access evaluation of roof and facade in apartment buildings was performed with the hourly simulations of total received insolation on each surface considering the shading effect of buildings. Electrical load profile of typical Korean apartments were investigated for the load matching analysis. To calculate an annual total PV output, we used MERIT program which is a hourly based load matching tool developed by ESRD. TRY weather data of Daejeon are applied for this analysis. Result shows that approximately 11% of total electric load of the site can be supplied by the PV system in the case of full installation of PV system at the whole south-face roof area of 9 buildings in this stuided apartment complex. Depending on a various installation option of roof and facade area, the possible ratio of PV supply in total electrical load varies from 9% to 42%. Among the 4 arrangement types, the ㅡtype revealed the best option for the maximum output of PV system.

• Korean Journal of Optics and Photonics
• /
• v.20 no.4
• /
• pp.217-222
• /
• 2009

In this paper, a low-cost hybrid-integrated tunable laser is realized using a polymer-ring resonator-based add/drop filter reflector and a reflective semiconductor optical amplifier. The add/drop filter reflector, composed of a double-ring resonator with different radii, can have characteristics of selective wavelength reflection and wide wavelength tuning with an aid of vernier effect derived from the radii difference. By hybrid-integrating the reflective semiconductor optical amplifier with the add/drop filter reflector, a tunable laser can be realized through an active alignment method. The hybrid laser exhibited a single mode lasing with side mode suppression ratio of 26 dB and full width half maximum of 0.03 nm. In addition, applying a low current as small as 25 mA onto electrodes over add/drop filter reflector, a wavelength tuning range of 17 nm could be obtained.