• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2005년도 전력전자학술대회 논문집
• /
• pp.781-784
• /
• 2005

This paper is aimed at presenting a proton exchange membrane ( PEM ) fuel cell stack. The fuel cell electrical output voltage and current (V-I) characteristic is described for the first time by a simplified closed form suitable. The characteristics obtained from the simulation are compared with the experimental results on a Ballard commercial fuel cell stack as well as to the manufacturer given data.

• 한국항공운항학회지
• /
• 제21권1호
• /
• pp.39-44
• /
• 2013

The amount of greenhouse gas (GHG) emissions has been increasing steadily over the last 4 years, averaging 6.8 percent a year, due to the growth of low cost carriers and the increased demand for air transportations. For the aviation GHG reduction, various fuel saving activities are implemented in many areas such as high-efficiency aircraft and bio-fuel development in the technical part and low carbon flight procedures, short cut route development in the operational approach. Among the various reduction technologies, we focused on low carbon flight procedures that are crucial to GHG reduciton and suggested a reduction effect according to target implementation rate using by fuel saving estimation data in each aircraft type.

• 한국항공운항학회지
• /
• 제30권2호
• /
• pp.24-33
• /
• 2022

This study analyzed and derived a plan to reduce fuel consumption of domestic aircraft. Specifically, this study tested fuel consumption in the short-distance flights of B737. Fuel consumption was calculated by substituting the simulation variable values into Matlab. The strength of this study is that the actual operating environment was reflected by collecting the B737 flight data. As a result of the study, the domestic fuel consumption rate in the computed flight plan was less than the current fuel consumption rate. Existing limitations of this study is that it was difficult to reflect the various variables constituting the flight environment, and thus there can be errors in the measurement of the fuel consumption. There are two major expected applications from this study. First, applying the plans from this study will lead to a reduction in the amount of fuel and thus provide positive economic effects for commercial airlines. Second, the plan from this study will provide a basis for pilots to predict fuel consumption more accurately. In conclusion, this study proposes a fuel saving plan with useful applications for pilots and airlines.

• 한국항공운항학회지
• /
• 제21권4호
• /
• pp.62-70
• /
• 2013

As the aviation industry looks to the future, fuel saving and $CO_2$ emission reduction play a dominant role in meeting the business challenges presented by global financial uncertainty. The IATA and International Government effort to save fuels, and then save 4 billion gallons of fuel burned, while reducing $CO_2$ emissions by 34 million tons. The various reduction methods adapted airlines and airports. We focused on optimized flight operation procedures for saving fuel and reduction emission cases. IATA and Canada government research reports focused on four methods that Engine Core Washing, Portable Water Management, Single Engine Taxi, APU limit operation. Apply to domestic airlines fuel data, Engine Core washing was saving more than Twenty-four thousand tons $CO_2$ emissions.

• 한국컴퓨터정보학회논문지
• /
• 제19권2호
• /
• pp.233-241
• /
• 2014

본 논문에서는 "Co-word" 특허분석방법과 "기술로드맵(technique road-map)" 그리고 특허활성화 라이프 사이클그래프 및 추세분석을 활용하여 ITS(Intelligent Transportation System)의 미래녹색기술에 대해 예측한다. 분석 결과 미래의 ITS 녹색 기술 분야의 발달로 탄소배출 절감 효과가 발생하기 때문에 환경 보호에 도움을 줄 것으로 예측 되었으며, 미래의 ITS 녹색 기술은 fuel saving 분야에 대한 성장이 클 것으로 예상되었다. 또한 fuel saving 분야는 미래의 IT 기술과의 융합으로 인해 더욱 실용적인 기술 분야로 발전할 수 있을 것으로 예측 되었다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.2108-2111
• /
• 2005

The mission life of a satellite determines the amount of fuel required on-board, while the total mass requirement limits the fuel to be loaded. Hence, for the design of thruster control loop, not only the satellite pointing accuracy but the saving of fuel is to be considered. In this paper, a two-step fuzzy controller is proposed for the thruster control loop to save fuel consumption. This approach combines requirements for pointing control accuracy with minimum fuel consumption into a fuzzy controller design. To demonstrate this approach, we have designed a fuzzy controller for the Sun point Mode of KOMPSAT-2. The performance of this fuzzy controller design is compared with that of PD controller used for KOMPSAT-2.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 정기총회 및 추계학술대회 논문집
• /
• pp.1405-1411
• /
• 2011

It is very often for the experienced diesel locomotive drivers to identify the proper replacing time for the fuel adjustment tube only based on their experience. Because of that, sometimes the locomotive's fuel is burned out due to the unnecessary torque. Or sometimes, the locomotive does not operate with its accelerating performance because the fuel is not supplied at the appropriate moment. Meanwhile, recent typical auto vehicles provide drivers with the average fuel efficiency and the instant fuel efficiency in real-time. By providing the real time display mentioned above, it is one of the good examples that those drivers, who had driven their cars not properly and used a lot of fuel with their bad driving habits, obtain the efficient driving pattern by continuous educating effect. Similarly, if the diesel locomotive provides the train driver with the optimal driving pattern within a certain driving section, it will be effective for fuel saving. It is possible to make the most effective driving pattern by performing the repeated trial running especially for the railway because the track's operating routes, its grades, and etc are relatively precise. This research analyzes the result data which was obtained by many times trial running on the identical section after equipping the fuel use measuring device to a certain test vehicle, and confirms the fuel saving effect depending on the driving pattern along the test section. At the same time, the research to establish the optimal driving pattern was progressed.

• 한국농공학회논문집
• /
• 제59권1호
• /
• pp.109-116
• /
• 2017

Biomass gasification produces syngas or producer gas as low calorific fuel gas that can be used as a fuel for combustion or prime movers as well as chemical synthesis. Internal combustion engines are readily available with lower costs and easily used for producing distributed power using biomass syngas. In this study, a dual fuel diesel engine was used to evaluate its performance when biomass syngas is used for fuel. The engine was originally developed for biogas application with a diesel engine with a 2,607 cc displacement. Both diesel fuel and syngas consumptions were observed at the different load conditions. The results indicate that the dual fuel engine showed a reasonably good performance and up to 63 % of diesel fuel saving.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 정기총회 및 추계학술대회 논문집
• /
• pp.2357-2364
• /
• 2011

Diesel locomotive operates the generator with the power from the diesel engine, and it consists of the typical serial-hybrid system which operates the train wheels by converting its generated electric energy into the torque of DC (or AC) motor. However, the technology of locomotives is only focused on trains' controlling power generation mechanism. Hence, it is a current issue that the efficiency of its engine and its generator is relatively lower than that of auto vehicles'. Particularly, since there are no proper equipment to measure the amount of fuel which is essentially necessary for the efficient use of fuel, it is not easy to confirm the instant amount of fuel use as well as the exact average fuel consumption per an hour. Due to those difficulties, it is urgent to develop the device that measures the fuel consumption. Plus, this use of the developed measuring device allows the various and useful analysis relating to the fuel consumption, and this could lead to establishing the efficient driving pattern regarding to fuel saving. This device consists of two flux (fuel level) measuring censors, MCU for calculating the measured values, the information recorder for saving measured values, and the display device for indicating the fuel amount consumed during driving.

• Journal of Advanced Marine Engineering and Technology
• /
• 제38권9호
• /
• pp.1057-1063
• /
• 2014

국제사회가 관심을 가지고 있는 이산화탄소 배출 감소를 위해 많은 연구 기관들이 연료 절감 방법을 연구하여 결과를 제시하고 있다. 비용 절감이 최종 결론이지만 아직까진, 어떻게 제시된 방법이 작동되는가, 어떠한 효과가 있는가, 어떠한 크기의 배에 가장 이상적이며 효과가 클까 등등 많은 의문점들이 제기되고 있다. 선주와 운영자들에게는 연료비가 가장 큰 비용 중 하나이다. 그리고 연료 절감은 선주나 운영자들에게는 비용 절감과 동시에 이산화탄소를 줄이는 가장 좋은 방법이다. 본 논문은 추진 효율을 높여 연료를 절감하는 방법 및 투자되는 비용과 일 년 동안 운항 후 얻어지는 연료비 절감을 통하여 투자금 회수 기간을 대략적으로 계산을 할 수 있도록 하고, 각 방법 간의 미치는 영향에 대하여 소개를 하고자 한다.