• 대한기계학회논문집B
• /
• 제33권5호
• /
• pp.373-380
• /
• 2009

The evaporation process of multi-component fuel is different from one of a single component, because the properties of each component affects among the components. In actual engine, the spatial distribution of fuel vapor concentration dominates auto-ignition and initial combustion, and depends on the volatility and diffusivity of each component fuel contained in the multi-component fuel. Then, this study proposes a simplified numerical scheme for analysis of evaporation process of multi-component fuel sprays. Evaporation process is calculated by KIVA-II code based on the simple two-phases region that is approximated by modified saturated liquid-vapor line, which was obtained by connecting the 50% distillation temperature for each component under several pressure fields. Consequently, it can be quantitatively simulated that vapor of low boiling fuel component mostly exists around nozzle and spray tip region, the high boiling duel component, on the other hand, mostly appears near the spray tip.

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 2005년도 연구개발 발표회 논문집
• /
• pp.759-764
• /
• 2005

In this paper, numerical analysis of hydrogen recycle system has been conducted in order to enhance the efficiency of automotive fuel cell. Generally, the excess hydrogen is provided in the automotive fuel cell. Since the non-reaction hydrogen reduces automotive fuel cell efficiency, reuse of the non-reaction hydrogen can be helpful to improve the fuel cell performance. In case of PEM FC, the water vapor is provided to hydrogen from the cathode so that the mixture experiences phase change depending on the changes of pressure and temperature. The internal flow of the mixture in the hydrogen recirculation system of fuel cell was investigated for real flow conditions. The variation of performance, properties and mass fractions of mixture, hydrogen and water-vapor were investigated. This study was performed based on 80KW level automotive fuel cell's recycling system.

• 한국자동차공학회논문집
• /
• 제17권2호
• /
• pp.132-140
• /
• 2009

Recently, the interest in the development of high efficiency Diesel engine technology using alternative fuel has been on the rise and related studies are being performed. Therefore, the DME(Dimethyl Ether), an oxygen containing fuel as an alternative fuel for light oil that can be used for diesel engines since it generates very little smoke. But it is unavoidable that the modification of a fuel supply system in an engine to application of the DME fuel because of DME fuel properties. So, in this study, a DME high pressure pump for a common-rail fuel supply system has been composed and the test results of the pump have been presented. As the results of the tests, it is confirmed that DME pump inlet pressure, pump speed and common-rail pressure effects on the volumetric efficiencies of the pump. Finally, it is defined that the optimum plunger volume of a DME pump has to be extended to the minimum 150% compared to a Diesel pump plunger volume considering DME fuel properties and volumetric efficiencies characteristics at same specifications of the high pressure pump.

• 한국응용과학기술학회지
• /
• 제32권3호
• /
• pp.588-598
• /
• 2015

최근 정부는 신재생에너지 연료 혼합 의무화 제도(RFS)와 신재생에너지 공급 의무화제도(RPS)를 적극 추진하고 있어 신재생에너지 연료의 중요성은 그 어느 때보다도 부각되고 있으며 적극적인 연구가 필요한 때이다. 이의 일환으로 발전용 바이오중유 시범보급사업과 관련 연구가 활발히 진행 중에 있다. 본 연구에서는 바이오중유의 성능평가기준(안) 마련을 위해 중유와 바이오중유의 연료품질 특성 및 산업용 보일러에서 연소 후 배출되는 먼지, 배출가스의 양을 비교 연구하였다. 연구결과 바이오 중유를 사용할 경우 먼지와 황산화물 등 유해배출가스가 현저히 저감 되는 것이 밝혀졌다.

• 한국분무공학회지
• /
• 제5권1호
• /
• pp.5-12
• /
• 2000

The beneficial aspects of applying emulsion fuels to combustion systems may be due to the changes of fuel properties which lead to the enhanced atomization characteristics. The spray characteristics of water/oil emulsified fuel injected from the pressure-swirl(simplex) atomizer using for oil burner were investigated. Four different water contents from 10 to 40 % by volume at 10% increment were prepared by mixing with the different contents of surfactants. Total amount of surfactant used was varied from 1 to 3 % by volume. This study demonstrates the influence of water and surfactant contents of emulsified fuel, injection pressure on the spray characteristics, i.e. Sauter mean diameter(SMD) and spray angle. The drop size distribution of the emulsified fuel spray was measured with a Malvem particle sizer. In order to measure the spray angle, the digital image processing was employed by capturing multiple images of the spray with 3-CCD digital video camera. It was evident that the addition of water and surfactant changes fuel properties which are the key parameters influencing the atomization of the spray. The increase in surfactant content results in the decrease of SMD and the increase in spray angle. The droplets decease with increase in injection pressure, but the influence of injection pressure in this experimental condition was less important than expected. The more viscous fuel with the increase of water content exhibits the larger droplets in the centerline of the spray, and the less viscous fuel in the outer edges of the spray. The increase in axial position from the nozzle causes the spray angle to decrease. The spray angle decreases with increase in water content. This is due to increase in viscosity with increase in water content.

• 공업화학
• /
• 제28권6호
• /
• pp.714-719
• /
• 2017

연료가 혼합된 엔진오일은 차량의 문제(엔진마모, 화재, 급발진 등)를 초래하여, 운전자의 안전을 위협할 수 있다. 본 연구에서는 연료가 혼합된 엔진오일의 다양한 성능을 분석하였다. 분석결과, 연료혼합 엔진오일은 인화점, 유동점, 밀도, 동점도, 저온 겉보기점도가 낮아졌다. 사구법 내마모성능시험에서는 연료가 혼합된 엔진오일이 열악한 윤활성으로 마모흔(wear scar)이 증가하였다. 또한 우리 연구팀은 ASTM D2887 방법을 적용한 고온모사증류시험(SIMDIST, simulated distillation)을 통해 엔진오일 내 연료성분을 분석하였다. SIMDIST 분석결과 연료는 엔진오일보다 짧은 머무름시간을 보였으며, 엔진오일 내 연료성분의 정량분석이 가능하였다. 이 SIMDIST 분석방법을 통해 기존 많은 분석장비, 시료양, 분석시간이 필요한 물성분석법을 대신하여 엔진오일 내 연료 오염여부 및 정도를 효과적으로 판단할 수 있을 것이다.

• 한국수소및신에너지학회논문집
• /
• 제21권3호
• /
• pp.214-219
• /
• 2010

In this study, we fabricated tubular ceramic support for segmented-in-series solid oxide fuel cell (SOFC) by using CSZ(CaO-stabilized $ZrO_2$) as main material and activated carbon as pore former. Thermal expansion properties of ceramic support with different amounts of activated carbon were analyzed by using dilatometer to decide a suitable sintering temperature. The tubular ceramic supports with different amounts of activated carbon (5, 10, 15wt.%) were fabricated by the extrusion technique. After sintering at $1100^{\circ}C$ and $1400^{\circ}C$ for 5h., cross section and surface morphology of tubular ceramic support were analyzed by using SEM image. Also, the porosity, mechanical property, gas permeability of tubular ceramic supports was measured. Based on these results, we established the suitable fabrication technique of tubular ceramic support for segmented-in-series SOFC.

• 공업화학
• /
• 제25권1호
• /
• pp.27-33
• /
• 2014

석유누출 사고로 인해 토양과 지하수 오염이 점차 증가되면서, 토양환경에 대한 중요성이 늘고 있다. 토양오염은 다른 환경오염에 비해 많은 정화비용과 긴 정화기간이 요구된다. 이런 이유로 토양오염이 발생되면, 어떤 오염물질에 의해 토양이 오염되었으며, 토양정화의 책임이 있는 오염자가 누구인지 법적 분쟁이 많이 발생되고 있다. 본 연구에서는 토양오염을 발생시킬 수 있는 항공유에 대한 물성 분석과 함께 항공유 내의 특정 첨가제를 분석함으로써 등유와 항공유의 구분법을 찾아내었다. 특히 발색제에 의해 등유 내 화학적 식별제만 발색되었으며, GC-MS 분석결과 항공유에서만 산화방지제와 금속불활성제가 분석되었다. 이는 추후 항공유에 의한 토양오염 야기 시, 어떤 석유제품에 의한 오염인지 쉽게 판단이 가능할 것이다.

• 한국자동차공학회논문집
• /
• 제19권6호
• /
• pp.107-112
• /
• 2011

FFV(Flexible Fuel Vehicle) is the vehicle that can be used liberally from gasoline to E100(Ethanol 100%) for fuel. Recently, interest in the bio-fuel is increased by the environmental factors like exhaustion of the fossil fuel and ruduction of greenhouse gases. For the reason, adopting of FFV is activated in the world including North and South America. In general, bio-ethanol has highly corrosive substance in compare with gasoline. In the part of fuel system, corrosion can make a safety problem in case of fuel leakage and engine starting problem. So the fuel system of FFV have to be made of high corrosion-resistant materials. This study examined the effect of bio-ethanol on the durability properties according to component materials in FFV fuel pump motor and regulator using the High Temperature Fuel Circulation Test.

• 공업화학
• /
• 제21권6호
• /
• pp.653-658
• /
• 2010

바이오디젤은 기존석유디젤을 대체할 수 있는 친환경적인 연료로 알려져 있다. 하지만 원료물질이 대부분 가격이 높은 식량자원을 이용한다는 단점을 지니고 있다. 본 연구에서는 음식쓰레기로 생긴 오리기름을 전처리 한 후, 염기촉매를 이용하여 전이에스테르화 반응을 통해 바이오디젤을 합성하였다. 합성되어진 바이오디젤의 대표적 연료특성으로 밀도, 동점도, 저온특성, 윤활성, 세탄가를 분석한 결과, 국내에서 동절기 외에는 충분히 석유대체연료로 사용 가능하다는 결과를 얻었다.