• Composites Research
• /
• 제37권1호
• /
• pp.7-14
• /
• 2024

이중 롤러는 Gap block 설계에 따라 동일한 크기와 하중 조건에서도 다양한 변형 양상을 가질 수 있다. 이러한 특성을 활용하여, 본 연구에서는 제품 이송 과정에서 발생되는 주름과 같은 결함을 최소화하기 위한 Carbonfiber reinforced plastic (CFRP) 이중 롤러의 Gap block 설계 방법을 제안한다. 가장 먼저, Gap block에 대한 주요 설계 변수와 공정 정밀도를 고려한 분석 case들을 선정하고, 유한 요소 해석을 활용하여 CFRP 이중 롤러의 변형 양상을 추출한다. 여기서, 본 연구의 목적을 만족하는 최적의 Gap block 설계를 수행하기 위해, 제품과 롤러가 접촉하는 지점들 간의 변형 편차에 기반하여 CFRP 이중 롤러의 변형 양상들을 비교 분석한다. 그 결과, 본 연구에서 제안한 Gap block 설계 방법을 통해, 롤러의 직경 또는 길이와 같은 전체적인 크기 변화없이 제품 이송 시 결함을 크게 감소시킬 수 있는 최적화된 CFRP 이중 롤러를 구축할 수 있었다.

• 지구물리와물리탐사
• /
• 제14권1호
• /
• pp.80-87
• /
• 2011

자율무인잠수정은 해수면탐사선에 비해 해저면에 더 가까이 접근할 수 있는 장점을 제공한다. 수심자료, 해저면 물질 정보와 해저면 하부 영상을 얻기 위해서는 자율무인잠수정에 탑재된 다중빔음향즉심기, 해저면영상탐사기 및 천부지층탐사기 등이 유용하게 사용된다. 일본해양연구개발기구는 3000m급 자율무인잠수정 우라시마를 개발하였다. 잠수정의 전력공급용 연료전지시스템의 공학적 개발과 시험과정을 거쳐 우라시마에는 신형 리튬이온전지 시스템이 설치되었다. 잠수정은 초기 공학적인 업무에서 과학적 사용 목적으로 개량되었다. 다양한 과학장비들이 추가되었고 2006년부터 과학적인 목적의 임무수행을 위한 잠항시험이 수행되었다. 2007년 시험운항에서 일본 기이반도 해역 북구마노분지 부근에서 우라시마의 해저면영상탐사기와 천부지층탐사기를 이용하여 고해상 음향영상자료를 획득하였다. 후방산란강도 도면에서는 많은 암설류가 확인되었고, 천부지층탐사단면에서 연구해역의 북동쪽 끝 부근의 하부구조가 확인되었다. 이러한 특징은 최신 선상지의 형성과 관련된 구조를 암시한다. 그러나 남서 해역에서는 해저면 하부 ~20 ms 부근에서 강한 반사층이 존재하는데, 이는 삭박특징으로 해석되며 현재는 더 젊은 해저 퇴적물로 덮여있다. 잠수정의 성능은 지속적으로 향상되고, 우라시마를 활용하여 많은 유용한 결과가 얻어질 것으로 기대된다.

• Korean Chemical Engineering Research
• /
• 제49권2호
• /
• pp.256-262
• /
• 2011

아민 흡수 공정에서 아민은 $O_{2}$ 및 고온에 의해 비가역반응을 일으키며, 이러한 현상을 열화반응이라 한다. 열화반응은 아민의 가치를 떨어뜨릴 뿐만 아니라 부식, fouling과 같은 문제를 일으킨다. 따라서, 본 연구에서는 여러가지 화학흡수제(MEA; monoethanolamine, AMP; 2-amino-2-methyl-propanol, DAM; 1,8-diamino-p-menthane)를 이용하여 i) 50, $120^{\circ}C$에서의 흡수평형, ii) $CO_{2}$ 및 $CO_{2}/O_{2}$ 계에서 흡수제의 열화에 따른 농도변화 및 초기열화속도상수, iii) 산소 $(O_{2})$에 의한 열화 영향을 살펴보았다. DAM은 흡수영역에서 MEA와 AMP에 비해 400~270% 높은 흡수평형부하를 보이며, MEA나 AMP에 비해 흡수/재생영역에서 흡수평형부하가 커 흡수능이 우수하였다. $CO_{2}$계에서 DAM의 초기열화속도상수는 $2.254{\times}10^{-4}$ $cycle^{-1}$로 MEA와 AMP의 $2.761{\times}10^{-4}$ $cycle^{-1}$, $2.416{\times}10^{-4}cycle^{-1}$에 비해 작아 열화가 늦게 진행되며, $O_{2}$ 주입시 초기열화속도상수는 1.3배 증가하여 2배 증가한 MEA보다 열화 영향이 적었다. 이러한, 일련의 열화반응은 GC chromatogram에서 새로운 peak의 생성과 FT-IR spectrum 분석을 통하여 확인할 수 있었다.

• 설비공학논문집
• /
• 제24권6호
• /
• pp.521-537
• /
• 2012

This article reviews the papers published in the Korean Journal of Air-Conditioning and Refrigeration Engineering during 2011. It is intended to understand the status of current research in the areas of heating, cooling, ventilation, sanitation, and indoor environments of buildings and plant facilities. Conclusions are as follows. (1) Research trends of thermal and fluid engineering have been surveyed as groups of fluid machinery and fluid flow, thermodynamic cycle, and new and renewable energy. Various topics were presented in the field of fluid machinery and fluid flow. Research issues mainly focused on the rankine cycle in the field of thermodynamic cycle. In the new and renewable energy area, researches were presented on geothermal energy, fuel cell, biogas, reformer, solar water heating system, and metane hydration. (2) Research works on heat transfer area have been reviewed in the categories of heat transfer characteristics, pool boiling and condensing heat transfer, nanofluids and industrial heat exchangers. Researches on heat transfer characteristics included heat transfer above liquid helium surface in a cryostat, methane hydrate formation, heat and mass transfer in a liquid desiccant dehumidifier, thermoelectric air-cooling system, heat transfer in multiple slot impinging jet, and heat transfer enhancement by protrusion-in-dimples. In the area of pool boiling and condensing heat transfer, researches on pool boiling of water in low-fin and turbo-B surfaces, pool boiling of R245a, convective boiling two-phase flow in trapezoidal microchannels, condensing of FC-72 on pin-finned surfaces, and natural circulation vertical evaporator were actively performed. In the area of nanofluids, thermal characteristics of heat pipes using water-based MWCNT nanofluids and the thermal conductivity and viscosity were measured. In the area of industrial heat exchangers, researches on fin-tube heat exchangers for waste gas heat recovery and Chevron type plate heat exchanger were implemented. (3) Refrigeration systems with alternative refrigerants such as $CO_2$, hydrocarbons, and mixed refrigerants were studied. Heating performance improvement of heat pump systems were tried applying supplementary components such as a refrigerant heater or a solar collector. The effects of frost growth were studied on the operation characteristic of refrigeration systems and the energy performance of various defrost methods were evaluated. The current situation of the domestic cold storage facilities was analyzed and the future demand was predicted. (4) In building mechanical system fields, a variety of studies were conducted to achieve effective consumption of heat and maximize efficiency of heat in buildings. Various researches were performed to maximize performance of mechanical devices and optimize the operation of HVAC systems. (5) In the fields of architectural environment and energy, diverse purposes of studies were conducted such as indoor environment, building energy, and renewable energy. In particular, renewable energy and building energy-related researches have mainly been studied as reflecting the global interests. In addition, various researches have been performed for reducing cooling load in a building using spot exhaust air, natural ventilation and energy efficiency systems.

• 공업화학
• /
• 제10권7호
• /
• pp.1086-1091
• /
• 1999

$K_2O-MgO-Al_2O_3$의 3성분계로부터 $K^+-{\beta}/{\beta}"-Al_2O_3$를 직접 고상반응법에 의하여 합성하였다. 합성시 초기조성, 합성온도, 합성시간 및 분쇄매체가 ${\beta}/{\beta}"-Al_2O_3$ 상형성 및 상관계에 미치는 영향에 대하여 분석하였으며 최대 분율의 ${\beta}"-Al_2O_3$ 상형성을 위한 최적 합성조건을 연구하였다. 조성범위로서 $K_2O$와 $Al_2O_3$상형성의 몰비를 1:5에서 1:6.2로, 안정화제로 사용된 MgO는 4.2 wt % 에서 6.3 wt % 사이에서 변화시켰으며 합성온도는 $1000^{\circ}C$에서 $1500^{\circ}C$까지 취하였다. ${\beta}/{\beta}"-Al_2O_3$상은 ${\alpha}-Al_2O_3$와 $KAlO_2$가 결합하는 $1000^{\circ}C$ 부근에서 형성되기 시작하여 점차 증가하다가 $1200^{\circ}C$ 부근에서 ${\alpha}-Al_2O_3$가 모두 사라지면서 균일화되었다. ${\beta}"-Al_2O_3$ 상분율은 $K_{1.67}Mg_{0.67}Al_{10.33}O_{17}$의 조성과 함께 $1300^{\circ}C$ 부근에서 최대값을 보였다. $1300^{\circ}C$ 이상의 합성 온도에서는 높은 potassium의 증기압에 따른 $K_2O$의 손실에 의하여 ${\beta}"-Al_2O_3$ 상분율이 감소하였으며 합성시간은 5시간 정도가 적당하였다. 분쇄 및 혼합을 위한 분산매체로는 증류수보다는 아세톤의 효과가 뛰어났다.

• 설비공학논문집
• /
• 제21권12호
• /
• pp.715-732
• /
• 2009

This article reviews the papers published in the Korean Journal of Air-Conditioning and Refrigeration Engineering during 2008. It is intended to understand the status of current research in the areas of heating, cooling, ventilation, sanitation, and indoor environments of buildings and plant facilities. Conclusions are as follows. (1) Research trends in thermal and fluid engineering have been surveyed in the categories of general fluid flow, fluid machinery and piping, new and renewable energy, and fire. Well-developed CFD technologies were widely applied in developing facilities and their systems. New research topics include fire, fuel cell, and solar energy. Research was mainly focused on flow distribution and optimization in the fields of fluid machinery and piping. Topics related to the development of fans and compressors had been popular, but were no longer investigated widely. Research papers on micro heat exchangers using nanofluids and micro pumps were also not presented during this period. There were some studies on thermal reliability and performance in the fields of new and renewable energy. Numerical simulations of smoke ventilation and the spread of fire were the main topics in the field of fire. (2) Research works on heat transfer presented in 2008 have been reviewed in the categories of heat transfer characteristics, industrial heat exchangers, and ground heat exchangers. Research on heat transfer characteristics included thermal transport in cryogenic vessels, dish solar collectors, radiative thermal reflectors, variable conductance heat pipes, and flow condensation and evaporation of refrigerants. In the area of industrial heat exchangers, examined are research on micro-channel plate heat exchangers, liquid cooled cold plates, fin-tube heat exchangers, and frost behavior of heat exchanger fins. Measurements on ground thermal conductivity and on the thermal diffusion characteristics of ground heat exchangers were reported. (3) In the field of refrigeration, many studies were presented on simultaneous heating and cooling heat pump systems. Switching between various operation modes and optimizing the refrigerant charge were considered in this research. Studies of heat pump systems using unutilized energy sources such as sewage water and river water were reported. Evaporative cooling was studied both theoretically and experimentally as a potential alternative to the conventional methods. (4) Research papers on building facilities have been reviewed and divided into studies on heat and cold sources, air conditioning and air cleaning, ventilation, automatic control of heat sources with piping systems, and sound reduction in hydraulic turbine dynamo rooms. In particular, considered were efficient and effective uses of energy resulting in reduced environmental pollution and operating costs. (5) In the field of building environments, many studies focused on health and comfort. Ventilation. system performance was considered to be important in improving indoor air conditions. Due to high oil prices, various tests were planned to examine building energy consumption and to cut life cycle costs.