• Korean Journal of Food Science and Technology
• /
• v.17 no.6
• /
• pp.500-505
• /
• 1985

A method to store concentrated milk in the liquid state at $-15^{\circ}C$ was developed, and quality changes during storage of milk were evaluated. Combined cryoprotectants (CCP) suitable for storing concentrated milk in the liquid state at $-15^{\circ}C$ were consisted of 17.74% sucrose, 8.87% glucose, 8.87% fructose, 2% glycerol, 0.25% sodium hexametaphosphate, 0.25% NaCl and 0.02% ascorbic acid. The amount of CCP to be added to concentrated milk to depress freezing point to $-15^{\circ}C$ was 38% by weight. Gelation due to protein denaturation was the most serious quality change during storage, which adversely affected appearance and utilization of the stored product. Gelation was observed after 3 weeks storage in the control, but it was not in milk with CCP throughout 18 weeks storage. Amount of protein precipitated increased in the control during storage, whereas there was no protein precipitated in milk with CCP. Surface color and peroxide value of the control and treatment did not change significantly during storage, and there were no marked differences between the control and treatment. These results indicated that quality of concentrated milk could be preserved, without gelation, by storing milk with CCP in the -liquid state at the frozen storage temperature. Besides, energy required for freezing preservation of milk could be significantly reduced by elimination of phase changes for freezing and thawing, and the stored product could be continuously processed for the final products without long waiting time for thawing.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.34 no.3
• /
• pp.213-217
• /
• 2001

In order to develop a new separation technology, supercritical fluid extraction process was used to produce high purity pigments and fatty acids from seaweed (Undaria pinnatifida). Supercritical carbon dioxide was used as a solvent and ethanol as an entrainer. The sample was treated by a frozen drier and experiments were conducted with a semi-batch flow system at various operating conditions (pressure range, $10.3\~17.2$ MPa; temperature range, $30\~45^{\circ}C$: particle size, $500\~1,000{\mu}m$ extraction time, 60 min). Characteristics of the recovered pigment (chlorophyll a) and fatty acids were determined by UV-spectrophotometry and gas chromatography, respectively. The highest extraction efficiency for fatty acids and pigments was achieved at 12.4 MPa, $35^{\circ}C$, $500{\mu}m$of seaweed size.

• Clinical and Experimental Reproductive Medicine
• /
• v.25 no.1
• /
• pp.59-64
• /
• 1998

This study was designed to evaluate the influence of pronuclear age on the survival and post-thawing development after cryopreservation of mouse embryos. Freezing and thawing were performed in the different pronuclear stages of mouse embryos after IVF. Embryos were obtained from $F_1$ hybrid mice and classified into 4 groups according to the pronuclear stage (6hr, 9hr, 12hr and 15hr after insemination). Pronuclear ova were slowly cooled in a biological freezer using 1.5M 1,2-propanediol and 0.1M sucrose as cryoprotectant. Thawing was done at room temperature and 1,2-propanediol was removed by multi-step dilutions. Both frozen-thawed embryos and control fresh embryos were cultured in vitro in Ham's F-10 medium supplemented with 4mg/ml BSA. In control group, the development rate after 48hr was 99.3%, and the complete hatching rate after 144hr was 61.3%. In experimental groups, the survival rate after thawing was 95.4% in 6hr, 88.7% in 9hr, 75.2% in 12hr and 62.4% in 15hr after insemination, the development rate after 48hr was 61.1, 77.0, 67.0 and 79.6%, respectively, and the complete hatching rate after 144hr was 25.7, 43.7, 42.2 and 60.0%, respectively. The survival rate in 15hr was significantly lower (p<0.05) compared with other groups. In vitro development rates after 48hr were similar in all groups, but complement hatching rate was significantly lower (p<0.05) in 6hr group. In conclusion, cryopreservation of mouse pronuclear ova with 2 distinct pronuclei (9hr and 12hr groups) showed better results after thawing compared with early (6hr group) or late pronuclear ova just prior to cleavage (15hr group).

• Journal of the Korean earth science society
• /
• v.30 no.4
• /
• pp.454-463
• /
• 2009

In this study, from January 2006 to February 2009, we observed 107 ice spikes formed in a natural state, and analyzed their environment. We developed an experimental device to reproduce ice spikes in laboratory and successfully made 531 ice spikes. We analyzed the process of the formation and the principle of how those ice spikes grow through videotaped data of the formation in the experiment. In the natural world, when the surface of water and the lower part of a vessel begin to freeze, a vent (breathing hole) develops at the surface where an ice is not frozen; this vent serves as the seed of an ice spike. It is assumed that the volume expansion of ice in the vessel which occurs when water freezes makes the supercooled water go upward through the vent and becomes an ice bar called an ice spike. In the laboratory, however, when distilled water is poured into an ice tray cube and kept in the experimental device for about one and a half hours at a temperature of -12- $-13^{\circ}C$, a thin layer of ice then begins to develop on the surface of the water, the vent is formed, and ice spikes form for about 10-30 minutes. These spikes stop growing when the end becomes clogged. Ice spikes can be described as falling into seven categories of shape, with the apex type topping the list followed by the slant type in the natural state and the vertical type predominating in the laboratory.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.36 no.9
• /
• pp.1225-1229
• /
• 2007

Cold buckwheat noodles with 3% vitamin D2 enriched Siitake mushroom and seaweed derived calcium (Aquacal) added as functional ingredients were developed. For the prediction of shelf-life of these cold buckwheat noodles, classified as unsterilized cooked noodles, bacterial counts and sensory evaluations were examined during 8 days under refrigerated conditions (5oC) and 8 weeks of storage under frozen conditions $(-18^{\circ}C)$. Results of bacterial count showed that cold buckwheat noodles were microbiologically safe within 6 days at the storage temperature of $5^{\circ}C$ and the shelf-life of these noodles could be extended to 8 whole weeks when stored at $-18^{\circ}C$. Apparent qualities (off-flavor and fungi development) of cold buckwheat noodles kept in $5^{\circ}C$ were not decreased within 8 days. Sensory characteristics (gloss, mushroom flavor, bitterness, chewiness and elasticity) of noodles were not changed during 8 weeks at $-18^{\circ}C$.

• Journal of the Korean Geosynthetics Society
• /
• v.17 no.4
• /
• pp.29-40
• /
• 2018

Oil sands, which are largely distributed in Canada and Venezuela, are a mixture of crude oil and sandy soils. In order to extract crude oil from oil sands, construction of massive oil sand plants is required. Generally, the typically-used foundation types of the oil sand plant are driven piles and cast-in-place piles. Most of the oil sand plants are located in cold and remote regions. Installation of driven piles in frozen or organic surface soils is difficult due to high resistance and installation equipment accessability, while the cast-in-place pile has concrete curing problem due to cold temperature. Helical pile can be installed quickly and easily using rotation with a little help of vertical load. As the installation of helical pile is available using a small and light-weight installation equipment, accessibility of installation equipment is improved. The helical pile has an advantage of easy removal by rotation in reverse direction compared with that of installation. Furthermore, reuse of removed helical piles is possible when the piles are structurally safe. In this study, the behavior of helical piles varying helix pitch was analyzed based on the numerical analysis results. Numerical model was calibrated based on the results of model helical pile tests in laboratory. The ultimate helical pile loads, the displacement of each helix attached to the shaft of the helical pile, and the load sharing ratio of each helix were analyzed.

• Korean Journal of Food Science and Technology
• /
• v.51 no.4
• /
• pp.348-355
• /
• 2019

This study investigated the impact of cellulase treatment on the extraction yield of potato starch (PS), and compared the physicochemical properties of PS by conventional (CSE) and enzymatic (ESE) starch extraction. In ESE, the PS extraction yield was predominantly influenced by reaction temperature, time and their interaction, compared to the cellulase concentration. When potatoes were treated for 8 h at $40^{\circ}C$ with 1.5% cellulase, the PS extraction yield was about 3.4-fold higher than that by CSE. Compared to CSE-PS, ESE-PS showed lower total starch contents and higher amylose contents, resulting in lower swelling factors and distorted pasting viscosity profiles accompanied by absence of peak and breakdown viscosities. However, ESE did not affect the gelatinization characteristics of PS. Overall results suggested that ESE can provide the highest yield of PS, and ESE-PS can be a potential starch source for extending the utilization of PS in food industries.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.20 no.6
• /
• pp.117-132
• /
• 2021

Due to the terrain in Korea, there are many road sections passing through mountainous areas. During the winter, there is a higher risk of traffic accidents, due to black ice caused by the lack of sunlight. Despite domestic road freezing safety measures, accidents caused by road freezing results in severe traffic accidents. Under these considerations, this study analyzed whether traffic safety signs that change in response to the external temperature help drivers recognize frozen road segments. The study was conducted through analysis of the effect of the signs on a driver's perspective. For the signs under development, out of the signs designed by experts, the sign design which received the highest visibility and effectiveness evaluation ratings from the general public was selected. The sign was implemented through Virtual Reality (VR) and installed on the right side of the road to analyze the effect on gazing and driving behavior. As a result of analyzing the driver's driving behavior, a speed reduction of about 7km/h or more was found in the sign section. Therefore, It was found that the existence of the sign had a strong relationship with the rate of the drivers' speed reduction.

• Advances in nano research
• /
• v.16 no.4
• /
• pp.325-340
• /
• 2024

There are several novel uses for dispersing many nanoparticles into a conventional fluid, including dynamic sealing, damping, heat dissipation, microfluidics, and more. Therefore, melting heat and mass transfer characteristics of a 3-D MHD Hybrid Nanofluid flow over a rotating disc with presenting dufour and soret effects are assessed numerically in this study. In this instance, we investigated both ferric sulfate and molybdenum disulfide as nanoparticles suspended within base fluid water. The governing partial differential equations are transformed into linked higher-order non-linear ordinary differential equations by the local similarity transformation. The collection of these deduced equations is then resolved using a Chebyshev spectral collocation-based algorithm built into the Mathematica software. To demonstrate how different instances of hybrid/ nanofluid are impacted by changes in temperature, velocity, and the distribution of nanoparticle concentration, examples of graphical and numerical data are given. For many values of the material parameters, the computational findings are shown. Simulations conducted for different physical parameters in the model show that adding hybrid nanoparticle to the fluid mixture increases heat transfer in comparison to simple nanofluids. It has been identified that hybrid nanoparticles, as opposed to single-type nanoparticles, need to be taken into consideration to create an effective thermal system. Furthermore, porosity lowers the velocities of simple and hybrid nanofluids in both cases. Additionally, results show that the drag force from skin friction causes the nanoparticle fluid to travel more slowly than the hybrid nanoparticle fluid. The findings also demonstrate that suction factors like magnetic and porosity parameters, as well as nanoparticles, raise the skin friction coefficient. Furthermore, It indicates that the outcomes from different flow scenarios correlate and are in strong agreement with the findings from the published literature. Bar chart depictions are altered by changes in flow rates. Moreover, the results confirm doctors' views to prescribe hybrid nanoparticle and particle nanoparticle contents for achalasia patients and also those who suffer from esophageal stricture and tumors. The results of this study can also be applied to the energy generated by the melting disc surface, which has a variety of industrial uses. These include, but are not limited to, the preparation of semiconductor materials, the solidification of magma, the melting of permafrost, and the refreezing of frozen land.

• Korean Journal of Food Science and Technology
• /
• v.39 no.4
• /
• pp.432-437
• /
• 2007

In this study, we examined the conditions for an auto-aging system placed within a kimchi refrigerator for optimal fermentation, and to prolong the storage time of kimchi. Various characteristics of kimchi fermented at different temperatures ($5-23^{\circ}C$) were compared. We observed that the higher the fermentation temperature, the less desirable the overall acceptability of the product. To establish the time point in which to convert the fermentation mode to the storage mode, kimchi was stored at $-1^{\circ}C$ for 1 week once it reached the designated acidity (0.4, 0.6, and 0.8%). The results indicated that the lower the kimchi acidity, the higher the sensory score. The storage temperature of $-1^{\circ}C$ was not low enough to retard microorganism growth completely; however, the kimchi stored at $-2{\pm}0.5^{\circ}C$ became frozen. Accordingly, $15^{\circ}C$ and $-2{\pm}0.5^{\circ}C$ are suggested as the fermentation and storage temperatures for the kimchi refrigerator, respectively. A kimchi acidity of 0.4% can be used as an index for the time point to convert fermentation to storage. Subsequently, the time required for the fermentation course can be calculated based on this.