• Korean Journal of Veterinary Service
• /
• v.18 no.3
• /
• pp.1-12
• /
• 1995

To investigate effect of seeding on post-thaw motility and viability of canine spermatozoa, the semen from male dogs which had been proved to be fertile in the past were frozen and seeded during freezing process. Post-thaw motility and viability of canine sperm which were frozen and seeded were investigated according to different seeding temperatures of $-5^{\circ}C$, $-10^{\circ}C$, or $-l5^{\circ}C$ and also according to different concentration of glycerol of 2%, 5% and 10%. In addition, post-thaw motility of canine sperm frozen by direct freezing in a deep freezer or programmed freezing in a programmed cell freezer was investigated. Post-thaw motility of canine sperm was compared according to different seeding temperatures : The sperm seeded at $-5^{\circ}C$ showed considerably higher post-thaw motility than that of non-seeding, and that seeded at $-10^{\circ}C$, or $-l5^{\circ}C$, respectively, in 2% and 5% glycerol groups on both 2 and 7day after freezing(p<0.05). In 10% concentration of glycerol, the sperm seeded at each seeding temperature showed considerably higher post-thaw motility than that of non-seeding group on day 7 after freezing(p<0.01). Post-thaw viability of canine sperm was compared according to different seeding temperatures : The sperm seeded at $-5^{\circ}$ showed significantly higher post-thaw motility than that of non-seeding, and that seeded at $-10^{\circ}C$, or $-l5^{\circ}C$, in 5% and 10% glycerol groups on day 7 after freezing(p< 0.05). In comparison of post-thaw motility of canine sperm seeded according to different concentration of glycerol, 5% glycerol group and 10% glycerol group showed considerably higher post-thaw motility than 2% glycerol group without difference between those two groups in all seeding temperatures($-5^{\circ}C$, $-10^{\circ}C$ and $-l5^{\circ}C$) on day 2 and 7 after freezing(p<0.01). In comparison of post-thaw viability of canine sperm seeded according to different concentration of glycerol, 5% glycerol group and 10% glycerol group showed the same considerably higher post-thaw viability than 2% glycerol group on each thawing day(p<0.01). The canine sperm frozen and seeded by programmed freezing method showed considerably higher post-thaw motility than that frozen by direct freezing method in all different seeding temperatures($-5^{\circ}C$, $-10^{\circ}C$ and $-l5^{\circ}$). These results indicated that the higher post-thaw motility and viability was obtained in the spermatozoa seeded than that of non-seeding, that among different seeding temperatures of $-5^{\circ}C$, $-10^{\circ}C$ and $-l5^{\circ}C$, the sperm seeded at $-5^{\circ}C$ showed higher post-thaw motility and viability than the other temperatures, also among different concentrations fof glycerol of 2%, 5% and 10%, the sperm frozen and seeded in 5% and 10% concentration of glycerol showed higher post-thaw motility and viability than that in 2% of glycerol, and that the sperm frozen and seeded by programmed freezing method showed higher motility than that by direct freezing method.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.31 no.4
• /
• pp.463-470
• /
• 1998

To improve muscle quality and prolong freshness of sashimi, the effects of freezing-thawing condition on physicochemical and rheological properties of plaice muscle were investigated. Muscle tested were frozen with quick freezing (liquid nitrogen gas) or slow freezing ($-15^{\circ}C$ air). Transition time of zone of ice crystal formation was within 10 minute for quick freezing and 110 minute for slow freezing. Time required for thawing to $0^{\circ}C$ in muscle temperature by various thawing methods was shortest with $25^{\circ}C$ tap water, followed by $15^{\circ}C$ tap water, $10^{\circ}C$ tap water, $25^{\circ}C$ air, $5^{\circ}C$ tap water and $0^{\circ}C$ cold water. Breaking strength of muscle was higher in quickly frozen sample than in slowly frozen sample. According to sashimi term, changes in breaking strength of muscle did not show any difference in quickly frozen sample, while showed significant difference in slowly frozen sample. The remaining content of ATP was not effected by freezing speed, and ATP content was apt to higher in quickly thawed sample than in slowly thawed sample. IMP was the majority of ATP and it's related compounds of sample after freezing and thawing. Collagen matrix was weakened markedly in slowly frozen sample than in quickly frozen sample.

• Journal of the Korean Geosynthetics Society
• /
• v.23 no.2
• /
• pp.53-62
• /
• 2024

Recently, development of non-traditional energy such as oil sands has been actively conducted in the cold region such as Canada. Frozen soil has different thermal and mechanical characteristics from general soil due to its high organic contents. This study evaluated the impact of organic matter content on the thermal and mechanical behavior of frozen soil samples collected from Alberta, Canada, and Gangwon Province, South Korea. As the organic content increases, the maximum dry unit weight decreases and the optimum moisture content increases in compaction tests. In uniaxial compression tests under frozen conditions, the strength of the frozen specimens increased as the temperature decreased. The strength of Canada soil sample increased with higher organic matter content at low temperatures. However, the strength of frozen soil was not significantly affected by organic matter content due to the complex behavior and unfrozen water content. Thermal conductivity tests showed higher thermal conductivity in frozen conditions compared to unfrozen conditions, due to the higher thermal conductivity of ice compared to water. These findings provide essential data for geotechnical design and construction in large-scale projects such as oil sands development in cold regions. Further research is needed to explore the impact of organic matter content on different types of frozen soils.

• Korean Journal of Agricultural Science
• /
• v.21 no.2
• /
• pp.133-141
• /
• 1994

Optimal thawing conditions of frozen model foods containing protein and starch were nvestigated at various thawing conditions such as room temperature, hot air, and microwave heating. Hardness of the frozen model foods was getting higher as the water content increased. Thawing rates at room temperature, hot-air heating at $50^{\circ}C$, and microwave heating were 0.02 Kg/min, 0.08 Kg/min, 0.01 Kg/min, respectively. Final thawing time was as follows; control 60min, 5% sucrose: 50 min, 10% sucrose: 30 min, 5% NaCl: 30 min. Total drip loss was as follows; room temperature thawing: 22.5%, 200W microwave thawing 1.3%, and $50^{\circ}C$ hot air thawing nearly negligible.

• Korean journal of food and cookery science
• /
• v.10 no.4
• /
• pp.405-411
• /
• 1994

This study was conducted to know the quality of chou made with flour pastes which were stored at different conditions of quick freezing, slow freezing, cold and room temperature. Also, this study included investigation of the chou properties such as expansion, sensory evaluation, degree of gelatinization, and physical and structural properties of paste were observed. There were not significant differences m diameter, height, volume, appearance, hollow formation, and sensory evaluation between the chou made with the paste stored at freezing condition and chou directly baked after pasting. Quick and slow freezing storages did not significantly affect the properties of chou, and the same results were obtained among the chou made with pastes thawed at room temperature and in microwave ovenrange. The chou of pastes stored at room temperature and in microwave ovenrange. The chou of pastes stored at room temperature and stored in refrigerator showed lowed expansion and value of sensory evaluation than those of frozen pastes. The paste stored at room temperature had the lowest hardness and viscosity compared with the other storage conditions. According to the observation of light microscope. the lipid bodies of the paste of freezing storage smaller those of the room temperature and refrigerator storage. The expantion of chou made with paste stored at room temperature was greatly decreased due to the high coalescence of lipid bodies, and also the paste components such as lipid, starch granule gluten at room temperature had inferior dispersion condition. The general tendency of the degree of gelatinization of chou were low in all treatments of paste. The values were 23.5%~46.0% in freezing, 77.3% in room temperature, 68.7% in directly baked after pasting, and 61.0% in cold storage, respectively. The formation and the taste of chou made with frozen paste were similar to those of chou directly baked pasting.

• Journal of Environmental Health Sciences
• /
• v.28 no.2
• /
• pp.161-171
• /
• 2002

The number of food establishments selling raw and convenience foods are increasing in Korea, and people enjoy purchasing and eating foods at these shops. However, there are only a few reports on the temperature control of the refrigerators and freezers at retail food shops. This study was performed to investigate the temperature control of refrigerators and freezers in retail food shops in Daegu. The survey was carried out from July 20 to August 30 in 2001. The trained surveyors visited the twenty retail food shops (four department stores, eight marts/supermarkets and eight convenience stores) in the 8 major areas of Daegu and inspected the temperature control of 48 refrigerators for dairy products, fruits & vegetables, and rolled rice & sandwiches, and 52 freezers for ice cream & sherbet, frozen food, and frozen fish. The percentage of the refrigerators, and freezers with unsafe temperatures higher than the recommended safe temperature (10℃ for refrigerators, and -18℃ for freezers) was 42%; 45.8% in refrigerators; 38.5% in freezers. On an average, the bigger the size of the shop, the better than the other freezers. On the other hand, the temperature control of refrigerator for fruits & vegetables was the worst because they were usually open. Actual temperatures in the refrigerators and freezers were found to be significantly higher than the reading on the thermometers attached to the refrigerators and freezers(p<0.05). These results indicate that temperature control of refrigerators and freezers at retail food shops should be monitored several times each day, and should have strict inspection. There should be more detailed legal standard and specification for temperature control of refrigerators and freezers at retail food shops to prevent foodborne illness from unsafely stored food.

• Korean Journal of Food Science and Technology
• /
• v.28 no.4
• /
• pp.657-662
• /
• 1996

In order to investigate the quality status of fried-frozen Korean meat ball products during retail distribution, VBN value, TBA value, pH and metmyoglobin ratio were determined for 117 samples collected in Seoul area during the period of May to September, 1995. Most samples maintained relatively good quality, but one sample of a company showed $32.5mg%$ of VBN value and 0.65mg/kg of TBA value which indicate the early stage of spoilage. Correlation coefficient between metmyoglobin ratio and TBA value was highly significant. Samples closer to shelf-life limit tended to show higher VBN value, TBA value, metmyoglobin ratio and pH. Out of the surveyed samples, 35% were on retail shelves of temperature above $-14^{\circ}C$, while only 18% were being sold at temperature below $-18^{\circ}C$. It is concluded that prepared frozen foods should be stored at the recommended temperature of $-18^{\circ}C$.

• Journal of Dairy Science and Biotechnology
• /
• v.42 no.2
• /
• pp.64-76
• /
• 2024

This study analyzed the physicochemical properties and rheology of frozen condensed skim milk during thawing at 5 room temperature (20℃). The viscosity of the condensed milk was 80 cps (21.5℃) immediately after manufacture, and this value was decreased to 0 cps (21. 5℃) during storage at day 7. The particle sizes of the condensed skim milk were 0.128 mm just after manufacture, and 0.522 and 0.818 mm at days 3 and 5 of thawing at 20℃, respectively. Condensed skim milk with no temperature abuse had lower acidity than those stored at room temperature on the 3rd and 7th days. Additionally, a sandy texture was observed as the thawing period increased. Based on the comprehensive results of this study, when frozen condensed skim milk is added to a product as a raw material, the longer the thawing period at room temperature, the longer the ice crystals inside melt and become water drips. Quality defects, such as weight loss, decreased pH, protein denaturation, and texture deterioration, are expected to occur.

• Journal of Food Hygiene and Safety
• /
• v.34 no.2
• /
• pp.199-204
• /
• 2019

This study aimed to generate a probability distribution model based on temperature data of frozen food storage facility as input variables for microbial risk assessment (MRA). We visited 8 food-handling businesses to collect temperature data from their cold storage warehouses. The overall mean temperature inside the storage facilities was $-20.48{\pm}3.08^{\circ}C$, with 20.4% of the facilities having above $-18^{\circ}C$, with minimum and maximum temperature values of -10.3 and $-25.80^{\circ}C$ respectively. Temperature distributions by space locations of natural and forced convection were $-22.57{\pm}0.84$ and $-17.81{\pm}1.47^{\circ}C$, $-22.49{\pm}1.05$ and $-17.94{\pm}1.44^{\circ}C$, and $-22.68{\pm}1.03$ and $-18.08{\pm}1.42^{\circ}C$ in the upper (2.4~4 m), middle (1.5~2.4 m), and lower (0.7~1.5 m) shelves, respectively. Probability distributions from the temperature data were obtained using the program @RISK. Statistical ranking was determined using goodness of fit to determine the probability distribution model. Our results show that a log-normal distribution [5.9731, 3.3483, shift (-26.4281)] is most appropriate for relative MRA conduction.

• Journal of Mechanical Science and Technology
• /
• v.20 no.4
• /
• pp.545-553
• /
• 2006

Generally, the temperature drop under $0^{\circ}C$ on vaporizer surface creates frozen dews. This problem seems to increase as the time progress and humidity rises. In addition, the frozen dews create frost deposition. Consequently, heat transfer on vaporizer decreases because frost deposition causes adiabatic condition. Therefore, it is very important to solve this problem. This paper aims to study of the optimum design of used vaporizer at local LNG station. In this paper, experimental results were compared with numerical results. Geometries of numerical and experimental vaporizers were identical. Studied parameters of vaporizer are angle between two fins $(\Phi)$ and fin thickness $(TH_F)$. Numerical analysis results were presented through the correlations between the ice layer thickness $(TH_{ICE})$ on the vaporizer surface to the temperature distribution of inside vaporizer $(T_{IN})$, fin thickness $(TH_F)$, and angle between two fins $(\Phi)$. Numerical result shows good agreement with experimental outcome. Finally, the correlations for optimum design of vaporizer are proposed on this paper.