• Journal of Construction Engineering and Project Management
• /
• v.7 no.3
• /
• pp.26-38
• /
• 2017

The architecture, engineering, and construction (AEC) industry is yet to formulate a holistic strategy to realign the evolving technological infrastructures with organisational ambitions and adaptive knowledge of the workforce. This study attempts to create an understanding of the underlying processes adopted by technology-enhanced construction organisations to disseminate and maintain knowledge within the workforce in order to keep pace with the evolving construction technologies. The study adopted expansive learning and adaptive expertise constructs to help better explain workplace learning support structures for organisational effectiveness in a turbulent situation. The two theories were tailored to empirically evaluate three case study construction organisations that have embarked on technology-enabled organisational changes. The study concluded on the creation of a facilitating workplace learning environment to enable the workforce to adapt into and resolve any inherent contradictions and cognitive ambiguities of the changing organisational conditions. This could ensure that novel and conflicting features of the emerging technologies can be adapted across the myriad multi-functional project activities in order to expand the frontiers of the technological capabilities to address the eminent issues confronting the AEC sector.

• Wind and Structures
• /
• v.30 no.4
• /
• pp.405-421
• /
• 2020

Quayside container cranes are important delivery machineries located in the most frontiers of container terminals, where strong wind attacks happen occasionally. Since the previous researches on quayside container cranes mainly focused on the mean wind load and static response characteristics, the fluctuating wind load and dynamic response characteristics require further investigations. In the present study, the aerodynamic wind loads on quayside container cranes were obtained from wind tunnel tests. The probabilistic and spectral models of the fluctuating aerodynamic loads were established. Then the joint probabilistic distributions of dynamic wind-induced responses were derived theoretically based on a series of Gaussian and independent assumption of resonant components. Finally, the results were validated by time domain analysis using wind tunnel data. It is concluded that the assumptions are acceptable. And the presented approach can estimate peak dynamic sliding force, overturning moments and leg uplifts of quayside container cranes effectively and efficiently.

• Asian Journal of Innovation and Policy
• /
• v.10 no.3
• /
• pp.380-403
• /
• 2021

Recently, smart factories have gained significant importance since the development of the fourth industrial revolution and the rise of global industrial competition. Therefore, the industries' survival to meet the global market trends requires accurate technological planning. Although, different works are available to investigate forecasting technologies and their influence on the smart factory. However, little significant work is available yet on the analysis of technological trends concerning the smart factory, which is the core focus herein. This work was performed to analyze the technological trends of the smart factory, followed by a detailed investigation of recent research hotspots/frontiers in the field. A well-known topic modeling technique, namely Latent Dirichlet Allocation (LDA), was employed for this study described above. The technological trends were further strengthened with the in-depth analysis of a smart factory-based case study. The findings produced the technological trends which possess significant potential in determining the technological strategies. Moreover, the results of this work may be helpful for researchers and enterprises in forecasting and planning future technological evolution.

• The Bulletin of The Korean Astronomical Society
• /
• v.44 no.2
• /
• pp.52.1-52.1
• /
• 2019

Exploring the vicinity of super-massive black holes (SMBHs) is one of the frontiers in astrophysics. KaVA AGN Science WG has launched its Large Program in 2014 focusing on two SMBHs, Sgr A∗ and M87. They are selected based on their large apparent size. Sgr A∗ is the excellent laboratory for studying gas accretion process onto SMBH and M87 is well known as the best case for investigating plasma outflow ultimately driven by SMBH. For Sgr A∗, KaVA and EAVN provides superb UV-coverage on its emitting region and its scattering medium. In the case of M87, we have conducted high cadence dual-frequency (22and 43GHz )VLBI monitoring to clarify the global profile of the M87 jet velocity field and the spectral index map, which should reflect global structure of magnetic fields in the jet. From 2017, the AGN LP is recognized as multi-wavelength EHT project, conducting quasi-simultaneous coherent observations of M87 and Sgr A∗ with the Event Horizon Telescope (EHT) during its campaign observation periods. AGN WG is reviewing and revising its LP to convert it to EAVN LP. We will briefly report our scientific results and future plan which includes even broader international collaboration, namely East-Asia to Italy Nearly Global (EATING) VLBI to reach higher angular resolution.

• Journal of Korean Academy of Nursing
• /
• v.50 no.3
• /
• pp.313-332
• /
• 2020

Purpose: This year 2020 marks the 50th anniversary of the founding of the Korean Society of Nursing Science (KSNS). This study was aimed to explore development of caring and describe the 50 years of history of KSNS within the sociocultural context of Korea regarding academic footsteps, meanings, and implications for the future. Methods: This study used a historical research methodology using a literature review and bibliometric analysis. Relevant literature was reviewed and the published abstracts in the Journal of Korean Academy of Nursing (JKAN) were analyzed using VOSviewer. Results: Birth control and family planning in the 1970s was the main research topic. In the 1980s, the development of nursing concepts, theories, and philosophies was the mission of KSNS to extend the disciplinary boundary. In the 1990s, the progress of KSNS to become one of the woman-dominant healthcare professionals was the mission in the given period. Expanding the frontiers of KSNS to the extent of global standards was the undertaking of the nursing scholars in the 2000s. Lastly, in the 2010s, the quality and quantity improvement of KSNS and JKAN is expected to make our future even prosperous. The map visualization of the 50 years of research accumulation showed the comparable opposition of quantitative vs. qualitative research methodologies, equation modeling, and instrument development. Conclusion: These clusters of research demonstrates the efforts to make nursing evidence by Korean nursing scholars for the last five decades. The growth in the slope of KSNS and outcomes of JKAN are to carry on to an unimaginable extent in the future.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2015.08a
• /
• pp.61.1-61.1
• /
• 2015

Nanoscale semiconductor plasma processing has become one of the most challenging issues due to the limits of physicochemical fabrication routes with its inherent complexity. The mission of future and emerging plasma processing for development of next generation semiconductor processing is to achieve the ideal nanostructures without abnormal profiles and damages, such as 3D NAND cell array with ultra-high aspect ratio, cylinder capacitors, shallow trench isolation, and 3D logic devices. In spite of significant contributions of research frontiers, these processes are still unveiled due to their inherent complexity of physicochemical behaviors, and gaps in academic research prevent their predictable simulation. To overcome these issues, a Korean plasma consortium began in 2009 with the principal aim to develop a realistic and ultrafast 3D topography simulator of semiconductor plasma processing coupled with zero-D bulk plasma models. In this work, aspects of this computational tool are introduced. The simulator was composed of a multiple 3D level-set based moving algorithm, zero-D bulk plasma module including pulsed plasma processing, a 3D ballistic transport module, and a surface reaction module. The main rate coefficients in bulk and surface reaction models were extracted by molecular simulations or fitting experimental data from several diagnostic tools in an inductively coupled fluorocarbon plasma system. Furthermore, it is well known that realistic ballistic transport is a simulation bottleneck due to the brute-force computation required. In this work, effective parallel computing using graphics processing units was applied to improve the computational performance drastically, so that computer-aided design of these processes is possible due to drastically reduced computational time. Finally, it is demonstrated that 3D feature profile simulations coupled with bulk plasma models can lead to better understanding of abnormal behaviors, such as necking, bowing, etch stops and twisting during high aspect ratio contact hole etch.

• Journal of the Korean Institute of Educational Facilities
• /
• v.2 no.2
• /
• pp.17-25
• /
• 1995

Because of energy crisis and environment pollution, we have become more conscious of the need to conserve heat in buildings. In response to this need. new requirements have been developed for insulation and other matters relating to energy consumption. Among others, more promising is to use the energy that is all around us in the dynamic forces of nature:the wind, tides, waves, rivers, geothermal hot spots, and the sun. The problem is that we have not been forced to find the technological means to convert these natural energies into usable forms because it has been too easy simply to dig or pump our energy out of the ground. Now, the problem is not a shortage of energy itself, but a shortage of technology for converting the energy that lies aoo around us into usable forms. Energy-conversion technology is the real issue, and solar energy is one of the brightest and most promising frontiers in energy conversion. All buildings are wrapped in a skin. Generally skins protect the person in stay from rain, wind, dust, noise, cold, hot etc.. However, there are some skins that provide energy from given environment into the building. Out of aoo, transparent insulation material is one of these materials that most effectively satisfies this kind of envelope function. Since, there are no research on transparent insulation in Korea, it has been studied very actively in Europe and in America. Thus, in this thesis, we will theoratically study and analyze how the heat flows through a trans arrent insulated opaque wall of a school building in Korea. It will be an important information for the effective using guidelines of transparent insulation materials in Korea.

• Journal of the Korean Regional Science Association
• /
• v.35 no.3
• /
• pp.25-32
• /
• 2019

The important of Smart City has been increasing on the driving force of 4^th industrial revolution and method to solve urban problems. Korea government introduced and implemented ubiquitous City as an intrinsic Smart City brand from the early 21^th century. Diverse types of Smart City projects were announced as national strategy by the spatial characteristics. National Test-Beds in Sejong city and Busan(EDC: Eco Delta City) are urban planning to be future city models for new town development. In the old towns in cities, various type of Smart City projects are support by government by urban growth stage; frontiers, stable or declining urban realm. 「3^rd Comprehensive Plan for Smart City(2019 ~ 2023)」 in Korea plans an important role to build innovative ecosystem and reinforce global competiveness by spreading of Smart Cities. For the successful Smart City as open and inclusive space, it is need that this space should be made by the cooperation of citizens, private sectors and local and central government.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.9 no.5
• /
• pp.1386-1391
• /
• 2008

The Korean Product Liability Act established the principle that a manufacturer has a duty to take care of a person who is not the customer who bought the product for him. In this instance, there is a duty to the patient for whom the product was purchased by the hospital from the pharmaceutical company. Therefore, the pharmaceutical company has the product liability for adverse reactions to the contrast medium. But the possibility for the patient to successfully sue the pharmaceutical company is quite low, because the patient needs to prove that a "defect" in the unsafe product was the cause of his injuries. And the physician or the radiological technologist can not reduce his liability risks based on the Product Liability Act. On the contrary, The has the product liability because diluting contrast medium belongs to the product category.

• Structural Engineering and Mechanics
• /
• v.49 no.4
• /
• pp.491-498
• /
• 2014

During the past years, the protection of the environment has become a major concern out passing the state frontiers to reach a planetary dimension. Depository waste sites have become a serious problem in terms of their locations and costs. On the other hand, the construction industry has a leading place in terms of quantities of waste produced from the start to the end of each construction site, by the large amounts of raw materials used and their respective consequences on the environment. The recycling of quarry wastes products, of demolished concrete, bricks and large quantities of waste resulting from the transformation of marble blocks can provide ideal solutions and advantages for the preservation of the environment, to become a supplementary source of aggregates. The main purpose of this study is to show technically the possibility of recuperating the aggregates of marble wastes as a partial substitute or total in the mortars. The aggregates used in this study is a sand of marble wastes (excess loads of sand exposed to bad weather conditions) of the quarry derived from Fil-fila marble (Skikda, east of Algeria). To achieve this work, we have studied the effect of sand substitution of marble wastes in the mortar with rates of (25, 50, 75, 100%); comparing the results obtained with reference samples (0%), the properties when the samples are fresh, and the mechanical performances of mortars at solid state (loss and gain of weight, dimensional variations). The introduction of recycled sand in the mortars gives good results and can be used as granulates.