• 한국기계가공학회지
• /
• 제19권8호
• /
• pp.1-7
• /
• 2020

In this study, three models on the installation of automotive additional front bumper guard were designed and the structural analysis was carried out. The additional front bumper models B and C appears to be safer on stability instead of the basic front bumper model A. Model A with a simple structure is shown to have the safe region overall except in the area where the load is applied directly. Models B and C are shown to have the shortest lives at the regions where the bumpers are connected with each other. By comparing with the least fatigue lives at models A, B and C, Model B has the longest life with the best durability.

• Computers and Concrete
• /
• 제4권1호
• /
• pp.33-47
• /
• 2007

Slipforming is a construction method in which the forms move continuously during concrete placement. This paper presents a numerical procedure based on the finite element method to simulate the thermal behavior of concrete during slipforming operations. The validity of the model was successfully tested by simulating a very complex but well documented field case of actual slipforming operations performed during the construction of an offshore concrete oil platform structure. The results obtained have been related to the shape of the concrete "hardened front" in the forms, which allows quick evaluation of the operation. The results of the numerical investigation have shown that the shape of the "hardened front" can be affected by the temperature of the fresh concrete and ambient conditions. For a given initial concrete temperature, there are limitations for the ambient temperature that, when exceeded, can create an unfavorable shape of the concrete "hardened front" in the forms. Similarly, for a given ambient temperature, the initial concrete temperature should not be fall below an established limit in order to avoid unfavorable shape of the "hardened front".

• 한국자동차공학회논문집
• /
• 제13권2호
• /
• pp.108-113
• /
• 2005

The damageability and repairability of similar platform type vehicles could be very concerned with design optimization. In all the vehicles crash tested, small size passenger vehicles were weakness in aspect of damageability and repairability. The most critical area appears to be repair cost considering that parts cost is the largest portion of total repair cost segments. Besides repair cost, attaching method of front sidemember and subframe are placed special importance for impact energy absorption and damageability and repairability. So in order to improve damageability and repairability of vehicle structure and body component of the monocoque type passenger vehicles, the end of front side member and front back beam should be designed with optimum level and to supply the end of front side member as a partial condition approx 300mm. The effectiveness of design concept on the 40% offset frontal impact characteristics of the passenger vehicle structure is investigated and summarized.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2005년도 제31회 KOSCO SYMPOSIUM 논문집
• /
• pp.20-27
• /
• 2005

I consider the structure of steady wave system which is admitted by the continuum equations for materials that undergo phase transformations with exothermic chemical reaction. In particular, the dynamic phase front structures between liquid and gas phases, and solid and liquid phases are computationally investigated. Based on the one-dimensional continuum shock structure analysis, the present approach can estimate the nano-width of waves that are present in combustion. For illustration purpose, n-heptane is used in the evaporation and condensation analysis and HMX is used in the melting and freezing analysis of energetic materials of interest. On-going effort includes extension of this idea to include broad range of liquid and solid fuels, such as rocket propellants.

• 한국수산과학회지
• /
• 제35권3호
• /
• pp.289-296
• /
• 2002

Using results obtained from field surveys in the outflow region of the Keum River in winter (February 22), spring (May 9), summer (July 31) and autumn (October 17) in 2000, it was described the nutrient front relating to the hydrography. It showed that the horizontal gradients was sharp in the distributions not only in salinity but also in nutrients in the region of the mouth of estuary far away about 20 km from the dyke of the Keum River during the year. The two layer structure was a ubiquitous feature in the inner estuarine side of the region showing the maximum horizontal gradients in salinity and nutrients. Although the absolute values in salinity and nutrient concentrations were distinguished by season, the nutrient front seperates the saltier and nutrients poor water in the open sea from the brackish and nutrients rich water of the plume. These results suggest that the nutrient front coincides with the esturine front in the region of freshwater influence (ROFI) of the Keum River.

• 한국수산과학회지
• /
• 제16권4호
• /
• pp.316-329
• /
• 1983

하계에 형성되는 전선은 외양과 조류에 의한 해저난류로 연직혼합이 일어나는 곳의 경제역이며, 그 위치는 G($35^{\circ}31^'N$)와 S-line ($35^{\circ}25^'$)의 $G_3$와 $G_4,\;S_3$와 $S_4$사이였다. 동계에는 서해 전역이 저층의 난류 혼합과 표면의 대류작용으로 인하여 전 해역에서 연직혼합이 일어나므로 하계의 구조와 같은 전선은 명확하게 형성되지 않았다. 8월은 전선을 경계로 하여 phytoplankton 종별 분포의 차이가 나타나는 현상을 보였으나 이와 같은 차이는 2월에는 볼 수 없다. 8월 zooplankton의 분포는 전선을 경계로 연안 정점들에서는 Pseudoeuphausia latifrons, Acetes chinensis가 배타적으로 출현하였다. 2월 zooplankton의 분포는 Corycaeus affinis, Centrophages abdominalis가 주로외 양정점들에 우점적으로 출현하고 이 두 종과는 달리 Paracalanus parvus는 주로 연안 수역에 우점적으로 출현하였다.

• 한국자동차공학회논문집
• /
• 제14권6호
• /
• pp.190-194
• /
• 2006

This research investigates vehicle structure acceleration and vehicle deformation with RCAR crash test. To investigate vehicle damage characteristics in an individual case, it is possible to RCAR low speed crash test. In this study, two tests were conducted to evaluate difference between RCAR new condition and RCAR old condition. A two large vehicles were subjected to a frontal crash test at a speed of 15km/h with an offset of 40% $10^{\circ}$ angle barrier and flat barrier. The results of the 15km/h with an offset of 40% $10^{\circ}$ angle barrier revealed high acceleration value on the vehicle structure and high repair cost compared to the RCAR 15km/h with an offset of 40% flat barrier. So in order to improve damage characteristics in low speed crash of vehicle structure and body component of the monocoque type passenger vehicles, the end of front side member and front back beam should be designed with optimum level and to supply the end of front side member as a partial condition approx 300mm.

• 한국항공우주학회지
• /
• 제37권1호
• /
• pp.82-88
• /
• 2009

정상파 시스템의 구조는 발열반응으로 상변화를 하는 물질의 연속방정식에 의해 타당성을 검증받는다. 1차원 연속체 충격 구조 분석에서의 이론적 배경을 기반으로, 상변화 현상과 관련된 파의 마이크로 두께를 산출하였다. 상변화를 하는 물질로써, n-heptane은 탄화수소 연료의 증발과 응축 분석에 사용하였고, HMX은 고체 로켓 연료의 용융과 응고 분석에 사용하였다. n-heptane의 증발-응축 면의 산출 두께는 $10^{-2}$ 마이크론 차수이고, 반면에 HMX의 용융-응고 면의 산출 두께는 1 마이크론 차수 이다. 소개된 상면 두께 산출 이론은 실험적으로 얻을 수 없는 방대한 범위의 에너지 물질까지 계산범위를 확장시킬 수 있다.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2006년도 제32회 KOSCO SYMPOSIUM 논문집
• /
• pp.149-156
• /
• 2006

Structure of edge flame established in a mixing layer, formed between two uniformly flowing pure $CH_4$ and pure $O_2$ streams, is numerically investigated by employing a detailed methane-oxidation mechanism. The numerical results exhibited the most outstanding distinction of using pure oxygen in the fuel-rich premixed-flame front, through which the carbon-containing compound is found to leak mainly in the form of CO instead of HC compounds, contrary to the rich $CH_4-air$ premixed flames in which $CH_4$ as well as $C_2H_m$ leakage can occur. Moreover, while passing through the rich premixed flame, a major route for CO production, in addition to the direct $CH_4$ decomposition, is found to be $C_2H_m$ compound formation followed by their decomposition into CO. Beyond the rich premixed flame front, CO is further oxidized into $CO_2$ in a broad diffusion-flame-like reaction zone located around moderately fuel-rich side of the stoichiometric mixture by the OH radical from the fuel-lean premixed-flame front. Since the secondary CO production through $C_2H_m$ decomposition has a relatively strong reaction intensity, an additional heat-release branch appears and the resulting heat-release profile can no longer be seen as a tribrachial structure.

• 한국연소학회지
• /
• 제11권1호
• /
• pp.19-26
• /
• 2006

Structure of edge flame established in a mixing layer, formed between two uniformly flowing pure $CH_4$ and pure $O_2$ streams, is numerically investigated by employing a detailed methane-oxidation mechanism. The numerical results exhibited the most outstanding distinction of using pure oxygen in the fuel-rich premixed-flame front, through which the carbon-containing compound is found to leak mainly in the form of CO instead of HC compounds, contrary to the rich $CH_4-air$ premixed flames in which $CH_4$ as well as $C_2H_m$ leakage can occur. Moreover, while passing through the rich premixed flame, a major route for CO production, in addition to the direct $CH_4$ decomposition, is found to be $C_2H_m$ compound formation followed by their decomposition into CO. Beyond the rich premixed flame front, CO is further oxidized into $CO_2$ in a broad diffusion-flame-like reaction zone located around moderately fuel-rich side of the stoichiometric mixture by the OH radical from the fuel-lean premixed-flame front. Since the secondary CO production through $C_2H_m$ decomposition has a relatively strong reaction intensity, an additional heat-release branch appears and the resulting heat-release profile can no longer be seen as a tribrachial structure.