• Journal of Acupuncture Research
• /
• v.17 no.1
• /
• pp.27-41
• /
• 2000

The meridian system is the most essential and basic connecting structure that maintains the vital activities of viscera and bowels by connecting them with each part of body's surface. Doctors can understand the healthy condition, and the region and deficiency-excessiveness of disease by observing the condition of Qi flowing. Deficiency and excessiveness could be differentiated by various symptoms expressed in meridian system. Especially there could be several clues like pain, heat-cold, protuberance-depression, change of color and shine in the line of channel leads to the judgment of deficiency-excessiveness The diagnosis of deficiency and excessiveness can be generalized by quantification of elastic status in skin surface along the meridian system. By comparing data from measurement of elastic condition with those from traditional deficiency and excessiveness, it could be utilized for the development of oriental medicine. All biological activities in the human body are based on meridian system according to the oriental medicine. Also the meridian system is viewed as basic and essential structure connecting internal viscera and each part of body. The areas of expressed channel phenomena are muscle to bone, muscle to muscle and bone to bone. These areas are called depression where meridian system is present and any changing state on those points can be measured. It could be difficult in diagnosing the reaction of meridian system because doctor can depend on his own judgment. Therefore, it is necessary to quantify and indexate channel reactions. To quantify the channel reactions, specially manufactured instrument was used to quantify the protuberance and depression to differentiate the deficiency and excessiveness. The results follow as below; 1. The elastic index measurement by the equipment proved a pattern of agreement showing the values that ranged within standard deviation 0.05kgf/cm throughout the experiment except few cases' measurement in CV-17. 2. To evaluate the state of deficiency & excessiveness of elastic index measurements in frontal point, elastic index measurements in the front paint were compared to the elastic index measured surrounding the point within 2.5 cm. Such result of indexing procedure was closely matched to the concept of palpitation. 3. If the elastic index values in the surrounding front point closely located to the elastic index values in the front point, the judgement on the state of deficiency and excessiveness was delayed. Otherwise, it was judged as deficiency or excessiveness. 4. Out of total 12 cases of comparing the elastic index values to the elastic index values in the surrounding front point, Three to nine front points were judged as either in the state of deficiency or excessiveness. 5. Among the nine front points judged as either in the state of deficiency or excessiveness, Four cases were matched to the electric index measured by EAV that evaluating the internal organs by five different phases. If more clinical cases are accumulated, it is expected to systematically theorize and improve the concept of deficiency and excessiveness in the internal organs using the front point.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.9 no.2
• /
• pp.227-238
• /
• 2006

Line density index(LDI) was developed to quantify a densely isothermal line rate as standard index in the ocean environment. Theoretical background on the LDI development process restricting index range 0 to 100 was described. And validation test was done for the LDI application condition that total line length is not greater than 1/10 of unit area. NOAA SST(Sea Surface Temperature) data were used for the experimental application of LDI in the South Sea of Korea. Using GIS, $0.1^{\circ}C$ isothermal lines were linearized as vector data form SST raster data, and unit area were built as polygon data. For the LDI calculation, spatial overlapping(line in polygon) was implemented. To analyze the effect of unit area size for the LDI distribution, two cases of unit area size were designed and descriptive statistics was calculated including performing normality test. The results showed no change of LDI's essential characteristics such as mean and normality except for the range of value, variance and standard deviation. Accordingly, it was found that complex structure of thermal front and even smaller scale of front width than unit area size could influence on the LDI distribution. Also, correlation analysis performed between LDI and difference of temperature(${\Delta}T^{\circ}C$), and horizontal thermal gradient(${\Delta}T^{\circ}C/km$) on the front was obtained from linear regression model. This obtained value was compared with the results from previous researches. Newly developed LDI can be used to compare the thermal front regions changing spatio-temporally in the ocean environment using absolute index value. It is considered to be significant to analyze the relationship between thermal front and marine environment or front and marine organisms in a quantitative approach described in this study.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.21 no.4
• /
• pp.362-370
• /
• 2010

In this paper, a compact RF Front-end module for Wireless Fidelity(Wi-Fi) and Worldwide Interoperability for Microwave Access(WiMAX) applications is realized by low temperature co-fired ceramic(LTCC) technology. The RF Front-end module is composed of three LTCC band-pass filters, a Film Bulk Acoustic Resonator(FBAR) filter, fully embedded matching circuits, an SPDT switch for mode selection, an SPDT switch for Tx/Rx selection, and an SP4T switch for band selection. The parasitic elements of 0.2~0.3 pF are generated by the structure of stacking in the top pad pattern for DC block capacitor of SPDT switch for mode selection. These kinds of parasitic elements break the matching characteristic, and thus, the overall electrical performance of the module is degraded. In order to compensate it, we insert a parallel lumped-element inductor on capacitor pad pattern for DC block, so that we obtain the optimized performance of the RF Front-end module. The fabricated RF front-end module has 12 layers including three inner grounds and it occupies less than $6.0mm{\times}6.0mm{\times}0.728mm$.

• Korean Journal of Heritage: History & Science
• /
• v.49 no.3
• /
• pp.78-103
• /
• 2016

This research is a study on the side framework structure of the hipped and gable roof of Muryangsujeon at Buseoksa Temple. There is a record that Muryangsujeon was deconstructed and repaired in the period of Japanese Occupancy, and its authenticity has continuously been called into question because the structure of the hipped and gable side roofs, and the bonding of the rafters and eaves were not in good order and very different from those of Joseon Dynasty. Scholars date it differently. It is either dated at 13th century or 12th century. This study compares the non-planar configuration of the middle and front proportions of Muryangsujeon's hipped-and-gable-roof framework with those of the Tang(唐) and Song(宋) Dynasties in China. It concludes that the hipped-and-gable-roof framework of those architecture were built with the same technique. The style of architecture that side rafters directly touch the internal security (梁), like in Muryangsujeon, is not usual even among the hipped and garble roofs of the Tang(唐) and Song(宋) Dynasties. The technique of constructing the hipped roofs developed much further after the Tang Dynasty because they began to use garble eaves to build the side structure. The technique seems to have developed greatly by the period of Ming and Qing Dynasties. It also seems that the parallel-flat (平行輻射椽) rafter, which is the form of rafters used between the parallelrafter period and the half-flat-rafter period is very similar to the construction style of the current rafters of Muryangsujeon. However, the Muryangsujeon's eaves do not touch the corner rafter from the middle part. This seems to be a unique style, which is not common in China. In conclusion, the style of the side roof framework of Muryangsujeon at Buseoksa Temple is not of the China's southern regions, but of the northern regions of Tang(唐), Song(宋) and Liao(遼) Dynasties. And when considering the construction year and proportions of the middle front and side front on the same flat, this must be an ancient technique of the northeastern regions of Asia. Since it is likely that the structure of the side roof framework of Muryangsujeon at Buseoksa Temple has not been altered but is a unique style of hipped and gable roofs, this roof can serve as a good guide to restoring the hipped and garble roofs of the pre-Goyreo Dynasty period.

• Journal of architectural history
• /
• v.1 no.2 s.2
• /
• pp.172-182
• /
• 1992

The binary classification, Yin & Yang, can be shown in our culture. Yin & Yang thinking reveals the Up/Down (Principal/Subordinate) relation in space, and Before/After relation in time, and it shows the sequence of Contrast${\to}$Reconciliation & Unification${\to}$Contrast. For example, a follower is Yin against King, while Yang as a father against his son in our trational cognitive structure. With Left/Right, Front/Rear, and Upper/Lower, In/Out division is a basic body-space term to grasp the space position. In the traditional Korean house, when we go out from the deepest 'In', Anbang to Daechung, we may call Anbang 'In' and Daechung 'Out'. When from Daechung to Anmadang reversely, we call Daechung 'In' and Anmadang 'Out'. Namely, Daechung is both 'In' and 'Out'. This is a fallacy logic in view of western basic conception. 'The In/Out Structure, system of a series of inner spaces, is defined as a transformation of cognitive structure of Yin & Yang thinking to the Korean architectural space. The space structure is one of the important deep structure in Korean society.' The concept of the space structure, apperred in east Asia, can make humane space, for it is not a physical 'type' of typepology but related to cognitive structure of human thinking, The structure is applicable to space design in modern society, for the cognitive structure exists in living culture by transformation.

• Journal of computational fluids engineering
• /
• v.19 no.3
• /
• pp.8-13
• /
• 2014

In this study, wave characteristics coming with oblique incident angle to permeable trapezoidal submerged breakwater on the porous seabed are calculated by using boundary element method. This numerical analysis, based on the wave pressure function, is analyzing the continuity in the analytical region including fluid and structure. From the comparison of the reflection coefficients and damping coefficient, the results of this study are in good agreement with the existing results. The peak values of reflection coefficient obtained by permeable trapezoidal submerged breakwater on the porous seabed are smaller than those of permeable trapezoidal submerged breakwater on the non-porous seabed. The velocity vector in front of permeable trapezoidal submerged breakwater on the porous seabed is smaller than that in front of permeable trapezoidal submerged breakwater on the non-porous seabed with out the energy loss.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.4 no.3
• /
• pp.210-216
• /
• 2004

In this paper, we propose a noncoherent On-Off Keying (OOK) Ultra Wide Band (UWB) system based on power detection with noise power calibration for low power applications. The proposed UWB system achieves good bit error rate performance which is favorably comparable to that of the system using the ideal adaptive threshold, while maintaining simple receiver structure, In addition, low power Analog Front-End (AFE) blocks for the proposed noncoherent UWB transceiver are proposed and verified using CMOS technology. Simulation results on the pulse generator, delay time generator and 1-bit Analog-to-Digital (AID) converter show feasibility of the proposed UWB AFE system.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.10 no.4
• /
• pp.141-148
• /
• 2002

Repair were made for front pillar, center pillar and side-step panel for lightweight vehicles with head-on and 40% off-set collision of 15 km/h in a RCAR standard. The salt dilution was sprayed and the compression tests were performed for vehicles with and without anti-corrosional treatment after repair. After 764 hours of salt-dilt sprayed test without using anti-corrosion, the mean penetration depth fur corrosion was shown to be 58% of the thickness. The resulyed decrease in bending stiffness by 10∼20% can cause reduction of the residual life and crash-absorption capability for damaged vehicles. The corrosoin safety tests showed that the anti-corrosional treatment should be made to improve the safety characteristics for a or damaged car.

• 한국연소학회:학술대회논문집
• /
• 2005.10a
• /
• pp.198-203
• /
• 2005

The LES-based level-set flamelet model has been applied to analyze the turbulent propane/air premixed bluff-body flame with a highly wrinkled flame fronts. The present study has been motivated to investigate the interaction between the flame front and turbulent eddies. Special emphasis is given to study the effect of G equation filtering treatment on the precise structure of turbulent premixed flames as well as the effect of sub-grid scale (SGS) eddies on the wrinkling of the flame surface. The level-set/flamelet model has been adopted to account for the effect of turbulence-flame interaction as well as to properly capture the flame front. Numerical results indicate that the present LES-based level-set flamelet approach has a capability to realistically simulate the highly non-stationary turbulent premixed flame.

• Advances in nano research
• /
• v.3 no.1
• /
• pp.49-54
• /
• 2015

The structure represents symmetrical metal electrode (gate 1) - front $SiO_2$ layer - n-Si nanowire FET - buried $SiO_2$ layer - metal electrode (gate 2). At the symmetrical gate voltages high conductive regions near the gate 1 - front $SiO_2$ and gate 2 - buried $SiO_2$ interfaces correspondingly, and low conductive region in the central region of the NW are formed. Possibilities of applications of nanosize FETs at the deep inversion and depletion as a distributed capacitance are demonstrated. Capacity density is an order to ${\sim}{\mu}F/cm^2$. The charge density, it distribution and capacity value in the nanowire can be controlled by a small changes in the gate voltages. at the non-symmetrical gate voltages high conductive regions will move to corresponding interfaces and low conductive region will modulate non-symmetrically. In this case source-drain current of the FET will redistributed and change current way. This gives opportunity to investigate surface and bulk transport processes in the nanosize inversion channel.