• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집B
• /
• pp.700-705
• /
• 2001

The paper presents a seam tracking controller of high speed rotating arc sensor developed by microprocessor based system. The seam tracking algorithm is based on the average current value at each interval region of four phase points on one rotating cycle. To remove the noise effect for the measured current, the area during one rotating cycle is separated into four regions of front, rear, left and right. The average values at each region are calculated, using the regional current values and a low pass filter incorporating the moving average and exponential smoothing methods is adopted.

• 제어로봇시스템학회논문지
• /
• 제11권4호
• /
• pp.363-368
• /
• 2005

This paper proposes an LOS(line-of-sight) guidance system of a ship for path following. From the viewpoint of a control configuration, guidance is a special type of compensation algorithm that is placed in front of the controller to accomplish navigational objects. A guidance system generates a reference trajectory for trajectory tracking or path control and decides the desired velocity, position and heading angle. A control system executes commands based on a reliable guidance law during navigation. An LOS vector from the vessel to a point on the path between two way-points in straight-line navigation or a point among turning circle in turning navigation is selected, and then a heading angle is calculated to converge the desired path based on the LOS vector. The LOS guidance law is defined for the straight-line and the turning circle, respectively. The effectiveness of the suggested LOS guidance system is assured through computer simulation.

• 동력기계공학회지
• /
• 제6권4호
• /
• pp.43-48
• /
• 2002

This paper presents a seam tracking controller of high speed rotating arc sensor developed by microprocessor based system. The seam tracking algorithm is based on the average current value at each interval region of four phase points on one rotating cycle. To remove the noise effect for the measured current, the area during one rotating cycle is separated into four regions of front, rear, left and right. The average values at each region are calculated, using the regional current values and a low pass filter incorporating the moving average and exponential smoothing methods is adopted. The effectiveness is proven through the experimental results for several kinds of welding condition.

• 소성∙가공
• /
• 제7권6호
• /
• pp.594-602
• /
• 1998

The design analysis of axisymmetric, multi-stage deep drawing dies was performed using the rigid-viscoplastic finite element formulation. In the formulation the axisymmetric CFS algorithm was employed. Hill's non-quadratic normal anisotropic yield criterion and isotropic hardening rule were considered. For trial initial displacements and tool contact points. the geometric force equilibrium method was adopted. In order to see the validity of the formulation, the multi-stage deep drawing processes of shell-cylinder front part of hydraulic booster were simulated. The simulation showed good agreements with measurments and PAM-STAMP results.

• Journal of Multimedia Information System
• /
• 제6권1호
• /
• pp.15-22
• /
• 2019

There are many ways to perform face recognition. The first step of face recognition is the face detection step. If the face is not found in the first step, the face recognition fails. Face detection research has many difficulties because it can be varied according to face size change, left and right rotation and up and down rotation, side face and front face, facial expression, and light condition. In this study, facial features are extracted and the extracted features are geometrically reconstructed in order to improve face recognition rate in extracted face region. Also, it is aimed to adjust face angle using reconstructed facial feature vector, and to improve recognition rate for each face angle. In the recognition attempt using the result after the geometric reconstruction, both the up and down and the left and right facial angles have improved recognition performance.

• Current Optics and Photonics
• /
• 제6권1호
• /
• pp.60-68
• /
• 2022

We report on the design of the secondary and the tertiary mirrors used in lightweight assemblies made entirely of silicon carbide (SiC). The essential design points are weight reduction within the acceptable deformation of the mirror surface by gravity release, temperature change, and vibration during or after space launch. To find a design that achieves the target requirements, we established finite element models for various candidate designs and subjected each one to wave front error analyses along gravity directions and in operation temperatures. We also calculated the natural frequencies of the candidate assemblies. Our study suggested that a triangular cell with bipod flexure support can satisfy the target weight within the requirements.

• 한국정보통신학회논문지
• /
• 제10권11호
• /
• pp.2075-2082
• /
• 2006

이 논문은 p-type single-crystalline float zone (FZ) 웨이퍼를 이용한 고효율 태양전지 제조 공정상의 공정 모델링과 최적화 기술에 대하여 서술하였다. 태양전지 제조 공정 중 중요한 4가지의 공정 1) Emitter formation; 2) Anti-Reflection-Coating (ARC): 3) Screen-printing; 4) Contact formation 중에서 제조비용을 줄여주며, 성능을 증대 시키는데 중요한 contact formation 공정을 모델링을 하고, 최적화 하였다. 본 논문에서는 공정에 소요되는 시간과 비용을 줄이기 위해 실험 계획법 (design of experiments: DOE) 중 중심 합성계획 (central composite design)을 이용하여 24개의 요인 (factorial), 8개의 축점 (axial points), 3개의 중심점 (center points)과 실험의 범위를 증가시키기 위한 6개의 임의점(random points)으로 실험계획을 수립하였다. 접촉형성(contact formation) 공정 이후에는 실험 결과를 사용하여 신경망 (neural network)으로 모델링을 하였다. 수립된 신경망 모델을 바탕으로 유전자 알고리즘 (genetic algorithm)을 이용하여 다양한 조합의 공정 파라미 터를 합성하는 방법으로 최적화를 수행하여 고효율의 태양전지를 구현할 수 있는 최적의 공정 조건을 수립하였다.

• 패션비즈니스
• /
• 제10권5호
• /
• pp.159-179
• /
• 2006

This research checked about the necessity for the development of men's dress forms in the first investigation for the educational circle and the men's wear industry. Somatotype characteristics were analyzed in the second investigation of body measurement with the subjects of 200 male adults in their twenties residing in Busan. The following are the results of the present research to develop male dress forms for patternmaking: 1. In the group analysis for the characterization of front body types, three somatotypes were found and named H, Semi X, and Y. In the cluster analysis of side body types, four types were identified: D, I, d, and q. In the combination of front and lateral body types, four kinds were chosen: semi X-I, semi X-q, semi Y-I, and Y-q. 2. Through the comparison of plane figures by the plaster method as well as horizontal and vertical cross sections by the sliding gauge method, semi X-I was finally chosen as the standard somatotype for male dress form development. 3. Compared with the sliding gauge method of the present dress forms, the research dress form reflected better the shapes of the parts of the back and hips and the position of the waist, especially for males in their 20's. In addition, the dress form in the current research had superior points in all the items of clothing evaluation. Based on the above results, the sizes and models of the men's dress forms for patternmaking were developed.

• Journal of Acupuncture Research
• /
• 제26권5호
• /
• pp.57-63
• /
• 2009

Objectives : Since the Front Points are treated as response zone, it can be used for the diagnosis and treatment of disease in viscera and bowels. Jeonjung($CV_{17}$) is the Front Point of SIMPO, it is related with cardiovascular, neuro-psychiatrical disease in aspect of Oriental Medicine. This research is for clarifying relations with palpation of the Jeonjung($CV_{17}$) and autonomic nerve system by comparing HRV and SRI(Stress Reaction Index). Methods : This study was proceeded for three months, from June 2009 to September 2009. Among 31 healthy volunteers, 13 subjects who complained the pressure pain around Jeonjung($CV_{17}$) are classified pressure pain group and 18 subjects who had no pain around Jeonjung($CV_{17}$) as normal group. All subjects had their HRV(SA-2000E: Medicore Co..Ltd. Korea) and SRI measured at visit. We studied the difference of HRV between two groups.(Statistics by Student t-test, p<0.05) Results : LF normalization of the pressure pain group were significantly higher than those of the normal group. HF normalization of the pressure pain group were significantly lower than those of the normal group. Compared with those of the normal group, total SRI of the pressure pain group were low but it's not significant. Conclusions : The results of HRV of the pressure pain group show that pressure pain around Jeonjung($CV_{17}$) is related to mental stress and autonomic disturbance.

• 패션비즈니스
• /
• 제22권4호
• /
• pp.30-46
• /
• 2018

The purpose of the study was to suggest certain measurements of the skirt block pattern drafting process for the Korean female fashion models, with the aim to improve its fit. For this purpose, the study carried out an analysis of the lower body features of a dress form developed for the study. This form was representative of Korean female fashion models' body features. The study performed a cross-sectional analysis at waist and hip levels and measured the angles from the frontal and lateral silhouettes of the dress forms. The comparisons of the skirt block patterns developed through draping by the use of 2 types of the dress forms developed and existed and through drafting according to the current patternmaking method have led to noticeable findings in terms of implementation of the skirt block drafting process for the Korean female fashion models. The results of the study are as follows: (1) the vertical lengths between the levels at the front waist point and the side waist point in the patterns are 0.7cm; (2) the vertical length between the levels at the front waist point and the back waist point in the back panel is 0.7cm; (3) the horizontal lengths between the perpendicular line from the side hip point and the side waist point in patterns are within a range of 2.0 to 2.2cm; (4) the horizontal length between the original and the adjusted back waist points moved into the waist line, in a range of 0.0 to 1.0cm, differs whether the center back line would be folded or sewn.