• Journal of architectural history
• /
• v.1 no.1 s.1
• /
• pp.33-43
• /
• 1992

The purpose of this study is to investigate the transformation of openings installed on the partition wall between Daechung and Bang, through the case study on MyungRyunDangs of 19 HangGyos in Kyungbuk province. The way to carry out this study was to look through existing situations and to find out transformed traces of the openings in terms of their locations on several floor types. The transformation of the openings was analyzed chronologically into two cases of 'before 18C' and 'after 18C'. i) Before 18C ; the early type had double swing window on the front column spacing and single swing door on the rear, and the later type had swing door on the front column spacing and on openings on the rear. ii) After 18C; the earlist type was the same as the later type of 'before 18C', the next type had swing doors on both the front and the rear column spacing, and the last type had Sabunhap-swing door on the column spacing, iii) Through those transformations, the windows gradually replaced by the doors in the openings.

• Transactions of Materials Processing
• /
• v.26 no.1
• /
• pp.55-62
• /
• 2017

This paper proposes the process to develop a light-weighting automotive door assembly using high strength steel with low cost penalty. In recent years, the automotive industry is making an effort to reduce the vehicle weight. In this study, inner panels for automotive front door using thinner sheets and quenchable boron steel were designed to reduce the weight of conventional one. In order to evaluate the stiffness properties for the proposed door design, the several static tests were conducted using the finite element method. Based on the simulation results, geometry modifications of the inner panels were taken into account in terms of thickness changes and cost saving. Furthermore, a prototype based on the proposed design has been made, and then static stiffness test carried out. From the results, the proposed door is proved compatible and weight reduction of 11.8% was achieved. It could be a reference process for automotive industry to develop the similar products.

• Journal of the Korea Institute of Building Construction
• /
• v.22 no.1
• /
• pp.115-123
• /
• 2022

Statistics on the occurrence of fires in residential facilities over the past 10 years, show that approximately 40% are fires in apartment buildings. To prevent the spread of fire and support evacuation in apartment housing, the fire resistance performance and performance design of fire doors are becoming more important. This study established a database using 395 quality inspection reports from 2016 to 2020, which passed the fire performance test, and derived the fire door performance-influencing factors through an analysis of the structure (12 elements) of the fire door. As a result, the effect of core material, adhesive, hinge type, blowing agent, etc. was confirmed in 287 pass cases. On the other hand, it was confirmed that the occurrence of flames and crevices in the 108 cases of failure were the major failure factors in the fire door fire resistance test. Fire doors are composed of composite materials to prevent failure of fire resistance performance, and efficient design and quality control are required through standardization of components.

• Transactions of Materials Processing
• /
• v.20 no.7
• /
• pp.512-517
• /
• 2011

TRB(Tailor Rolled Blank) is an emerging manufacturing technology by which engineers are able to change blank thickness continuously within a sheet metal. TRB door inner panels with required larger thicknesses can be used to support localized high loads. In this study, the aluminum alloy 5J32 TRB sheet is used for a door inner panel application. The TRB material properties were varied by using three heat treatment conditions. In order to predict the failure of the aluminum TRB during simulation, the forming limit diagram, which is used in sheet metal forming analysis to determine the criterion for failure, was investigated. Full-field photogrammetric measurement of the TRB deformation was performed with an ARAMIS 3D system. A FE model of the door inner panel was created using Autoform software. The material properties obtained from the tensile tests were used in the numerical model to simulate the door inner of AA 5J32 for each heat treatment condition. After finite element analysis for the evaluation of formability, a prototype front door panel was manufactured using a hydraulic press.

• Smart Media Journal
• /
• v.6 no.1
• /
• pp.61-67
• /
• 2017

A large number of people living in modern times prefer remaining unmarried or living alone independently for the reason of their own will or another person's will. This is because they dislike being interfered with by other persons or because there is a financial problem. This behavior has become mainstream in persons working for professional jobs, persons having a strong disposition toward individual activity or college students. In particular, career women pursuing their own comfortable life have the tendency to prefer single life. However, sometimes, they become a target of crime that targets and makes bad use of this point. For these reasons. Consequently, sometimes, they additionally install and use a security system such as door security guard at front door and so on. It is not so difficult to lock the door security guard at the front door. However, it is apt to be forgotten. And when they are on the bedspread before falling asleep, in case they should check whether the door security guard is locked or in case they should lock it, they should get up, go to the entrance, and check and lock the door security guard. They often don't lock the door security guard due to their feeling that it is all right because of annoyance and inconvenience. This paper is intended to work for safety from crime such as illegal housebreaking by more conveniently using the door security guard after designing and implementing a system that can remotely control the door security guard, using a smartphone as a method of resolving this annoyance and keeping life more safe.

• Journal of the Korean Society of Radiology
• /
• v.11 no.6
• /
• pp.423-428
• /
• 2017

In this study, the calculation of the effective spatial dose distribution of the diagnostic imaging laboratory of K university was performed by the Monte Carlo simulation. The radiation generator has a maximum tube voltage of 150 kVp and a maximum current of 700 mA. Using the results, we compared the spatial effective dose distributions of diagnostic imaging laboratory when the shielding door was closed and opened. In conclusion, it was found that the effective dose in the operating room of the diagnostic imaging laboratory does not exceed the annual dose limit (6 mSv/y) of the student (occasional visitor) even when the door is opened. However, since the effective dose when the door is open is about 16 times higher in front of the lead glass window and about 3,000 times higher in front of the doorway than the case when the door is closed, closing the shielding door at the time of the practical exercising reduces unnecessary radiation exposure by great extent.

• Journal of the Korea Convergence Society
• /
• v.13 no.4
• /
• pp.45-51
• /
• 2022

Fear of contact exists due to the prevention of the spread of infectious diseases such as COVID-19. When using the common entrance door of an apartment, access is possible only if the resident enters a password or obtains the resident's permission. There is the inconvenience of having to manually enter the number and password for the common entrance door to enter. Also, contactless entry is required due to COVID-19. Due to the development of ICT, users can be easily identified through the development of face recognition and voice recognition technology. The proposed method detects a visitor's face through a CCTV or camera attached to the common entrance door, recognizes the face, and identifies it as a registered resident. Then, based on the registered information of the resident, it is possible to operate without contact by interworking with the elevator on the server. In particular, if face recognition fails with a hat or mask, the visitor is identified by voice or additional authentication of the visitor is performed based on the voice message. It is possible to block the spread of contagiousness without leaving any contactless function and fingerprint information when entering and exiting the front door of an apartment house, and without the inconvenience of access.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.10 no.1
• /
• pp.125-132
• /
• 2002

Recently, ULSAB(Ultra Light Steel Auto Body) concept is getting more attention due to various benefits in automotive body design. One of the ULSAB efforts is making a door with TWB(Tailor Welded Blanks). In TWB, two or more patches of steel panels are welded together before stamping process. In this research, domains and thicknesses of the patches in a front door structure are determined by a series of optimization schemes composed of topology, size and shape optimization and DOE(Design of Experiments) scheme. A door is designed to have better performances compared to exiting structure considering static stiffness and natural frequency. The final design is discussed and compared to the existing design.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.15 no.1
• /
• pp.146-153
• /
• 2007

Weight reduction for automobile components has been sought to achieve fuel efficiency and energy conservation. There are two approaches in reducing their weights. One is by using material lighter than steel, and the other is by redesigning their structures. The latter has been performed by adopting hydroforming, tailor weled blank, optimization, etc. In this research, the kriging approximation method and simulated annealing algorithm are applied to the design of a front door made by TWB (Tailor Welded Blank) technology. The design variables are set up as the thicknesses of parts and the positions of parting lines. A thickness set considered as a design variable of each part is not arbitrarily determined but selected from standard products, so it is a discrete set. This research presents the discrete and continuous structural optimization method for an automotive door design.

• Proceedings of the Korean Institute of Interior Design Conference
• /
• 2004.11a
• /
• pp.197-198
• /
• 2004

This study has been done to know concretely the designs of traditional American houses in eighteen century and their specific styles based on Deerfiled town and I found out followings. First, the traditional eighteen century houses in Deerfied had a 'L'shape exterior view and a flat facade and the front door made a symmetry with sash windows. A chimney had been installed in the middle of the roof and it usually had a gable with natural materials in a simple manner. Secondly, the most important factor to design houses was a front door and it had been decorated in luxury and in a display. Lastly, the traditional American houses in eighteen century had been greatly influenced not by the that of British which is commonly taken but by the various cultural backgrounds which represented regional characteristics and was rather simple.