• 한국어병학회지
• /
• 제9권1호
• /
• pp.15-19
• /
• 1996

피라미의 아가미로부터 검출된 Myxobolus sp.의 성숙 포자는 정면에서 특징적인 봉합융기가 없는 난형, 측면에서 직선적인 봉합면을 가진 레몬모양을 나타내었고 대칭적이며 표면이 평평한 포자각을 가졌다. 평균적인 포자의 길이, 넓이 및 두께는 각각 $10.4{\mu}m$, 7.7mm 및 $6.2{\mu}m$ 였고 평균적인 극낭의 길이와 넓이는 $4.6{\mu}m$와 $2.2{\mu}m$로 측정되었고 극낭속에 있는 극사는 6또는 7coil로 관찰되었으며 방출된 극사의 길이는 55-135㎛이었다. 한편으로 성숙 포자는 작은 극포간 돌기, 타원형의 요오드 친화성 공포 및 점막이 존재하는 것으로 관찰되었고 성숙 포자의 형태 및 크기는 M. cyprinicola Reuss, 1906과 가장 비슷한 것으로 나타났다.

• 건축역사연구
• /
• 제22권3호
• /
• pp.7-14
• /
• 2013

Ikseon-Dong 166 is one of the traditional urban resident area developed during 1930's. The purpose of this research is to analyze the structural relationship between a conventional housing unit plans and modern block plans based on orthogonal geometry. To fully explore the selling point of the new urban development, the planner or real estate developer in private sector did not abandon or compromise the conventional house layouts, consists of single layer of rooms keeping the main room facing south. This study concludes the following factors connecting the urban and architectural plans. Oblong block plans following east-west direction did not allow the southern exposure of courtyard and main room, which was the absolute requirement for traditional house units, the longer side of block plan followed north-south direction as a result. Considering the possibility of rent, having entrance at the east or west side of individual site enables two separate household maintain their spatial privacy. In addition to the factors mentioned above, when the blocks are to be divided into individual addresses, north-south oblong block plans maintained the length to face the front road minimum while the southern exposure maximized. These factors explains why the private developers maintained their blocks elongated to north-south direction when the block plans laied out by public sectors which did not care that much of southern exposure show random orientation in the view point of solar exposure.

• 건축역사연구
• /
• 제20권1호
• /
• pp.95-116
• /
• 2011

It is a true fact that the ancient Buddhist temples of Korea were great, important historical influence revealing the transition and developing stages of all the BUddhist temples in Eastern Asia including China and Japan. Before Mahayana arose within India, the monastery and pagoda were united during the conflict and development of the original Buddhism and pagoda faith. With the arising of Mahayana and the introduction of Buddhist statues, the Buddhist temple and pagoda were in conflict and resulted in separation. With the creation and development of the Mahayana Bodhisattva concept, Hinayana and Mahayana started to show doctrine differences and expressed each others' characteristics relevant to the structure of the temple. As a result, the Buddhist Temple having 1 pagoda spread in China together with Hinayana and Mahayana. The Buddhist temple of Hinayana had its temple and pagoda separated and the Buddhist temple that has a pagoda in front was divided into a form of 1 pagoda and 1 main temple. The temple and pagoda for Mahayana in the form of 1 pagoda and 2 temple, where the main statue of the Buddha may be worshipped from both the left and right hand sides, were separated in the form of 1 pagoda and 3 temples to have its original form again. Mahayana was first introduced into Goguryeo through the routes in the northern region and developed from having 1 pagoda and 2 temples, to having 1 pagoda and 3 temples. China was influenced by the southern regions, which is why Abhidharma was introduced into Baekje. Later on, the importance of Bodhisattva increased and the transition speed of the Buddhist temple having 1 pagoda and 3 temples accelerated, as Buddhism became more popular and as Mahayana flourished. The statue of the Buddha on both sides of the pagoda shall gradually move next to the central temple, and the temple shall form large crowds to not only form a tacit boundary with the pagoda but the expansion of Bodhisattva shall also have a wall or a corridor constructed in between the central, left and right hand side temples to form separate areas, and shall have a pagoda built in front of the temples that worship from both sides. In conclusion, independence shall exist among each Bodhisattva within the Buddhist temple, and the status of the pagoda shall fall and appear as the pagoda on both sides in front of the main Buddha statue.

• Asian-Australasian Journal of Animal Sciences
• /
• 제28권9호
• /
• pp.1259-1265
• /
• 2015

The present study was performed to study the genetic relationship of productive life with production and type traits of Korean Holsteins at first three lactations. The data for the analysis from 56,054, 28,997, and 11,816 animals of first, second and third parity cows which were born from 2006 to 2011 were collected by Dairy Cattle Improvement Center, National Agricultural Co-operative Federation. Milk, protein and fat yields adjusted for 305 days and average somatic cell score considered as production traits and analyzed type traits were stature, strength, body depth, dairy form, rump angle, rump width, rear leg side view, foot angle, front attachment placement, rear attachment height, rear attachment width, udder cleft, udder depth, front teat placement and front teat length. A multi trait genetic analysis was performed using Wombat program with restricted maximum likelihood animal model composed of fixed effect of birth year, farm and the random effect of animal and random residual effect according to the traits. Heritability estimates of productive life were between 0.06 and 0.13. Genetic and phenotypic correlations between production and productive life traits ranged from 0.35 to 0.04 for milk, 0.16 to 0.05 for protein and 0.18 to 0.02 f 15-0034 (2nd) 150520 or fat. Somatic cells score showed a negative genetic and phenotypic correlation with productive life and also udder type traits, indicating that the selection for higher udder traits will likely to improve resistance to mastitis and persistence in the herd. Among all dairy form type traits, udder characters such as udder cleft showed a significant relationship with productive life. However, a specific change of heritabilities or correlations were not observed with the change of parity. Moreover, further studies are needed to further confirm the significance of the above traits and the effect of parity on above relationships in order to minimize both voluntary and involuntary culling rates while improving herd health and maintaining high yielding dairy cows.

• 한국컴퓨터정보학회논문지
• /
• 제27권12호
• /
• pp.59-68
• /
• 2022

본 논문은 주어진 현품 영상과 도면 영상의 유사도를 비교하여 1:1 검증을 위한 방법을 제시한 것으로, CNN(Convolutional Neural Network) 기반의 딥러닝 모델을 두 개로 결합하여 Siamese Net을 구성하고 현품 영상과 도면 영상(정면도, 좌우 측면도, 평면도 등)을 같은 제품이면 1로 다른 제품이면 0으로 학습하며, 추론은 현품 영상과 도면 영상을 쌍으로 질의하여 해당 쌍이 같은 제품인지 아닌지를 판별하는 딥러닝 모델을 제안한다. 현품 영상과 도면 영상과의 유사도가 문턱 값(Threshold: 0.5) 이상이면 동일한 제품이고, 문턱 값 미만이면 다른 제품이라고 판별한다. 본 연구에서는 질의 쌍으로 동일제품의 현품 영상과 도면 영상이 주어졌을 때(긍정 : 긍정) "동일제품"으로 판별할 정확도는 약 71.8%로 나타났고, 질의 쌍으로 다른 현품 영상과 도면 영상이 주어졌을 때(긍정: 부정) "다른제품"으로 판별할 정확도는 약 83.1%를 나타내었다. 향후 제안한 모델에 파라미터 최적화 연구를 접목하고 데이터 정제 등의 과정을 추가하여 현품 영상과 도면 영상의 매칭 정확도를 높이는 연구를 진행할 예정이다.

• 한국의류산업학회지
• /
• 제16권6호
• /
• pp.961-970
• /
• 2014

Several retailers such as Target and Kohle's and their vendors have piloting the 3D clothing simulation programs to produce garment samples. However, few studies have verified the virtual fit information and 3d visualization process for pants, and no study compared the commercial 3D virtual programs. This study is designed to analyze similarity of fit and appearance between real pants with 3D virtual pants based on three 3D virtual programs (Optitex, CLO 3D, and i-Designer), three lower body types (slim, normal, and thick waist type), and fit status. We selected a representative model for each lower body type, produced their custom pants according to Lee and Nam's method(2007), and took photos of front, side and back view for visual analysis. Then, we virtually tried each model's custom pants on her parametric avatar developed by manually inputting their body measurements using the three 3D virtual program. Thirty fit experts compared the real fit to virtual fit. This study found that 'Optitex' and 'i-Designer' can visualize more effectively than 'CLO 3D' in many fit locations. Regarding the body types, 3D virtual program can visualize pants fit for 'thick waist body type' more preciously than the other body types. With respect to fit status, it does not affect much on the similarity overall.

• 대한가정학회지
• /
• 제19권3호
• /
• pp.21-32
• /
• 1981

Clothing must have the individual beauty and the function that one can do one's body movement freely. therefore, from the human engineering view point, the exact measurement of the human body and the analysis of it's results must be applied to clothing because the arm works most. In this study, the skin surface of arm was investigated by shell made of Alginate of each movement. And by sometic method the rate of expansion and contraction of each section, inter-relation among the bust girth, axillary arm girth and scye girth and between the shoulder length right and the under axilla waist length were calculate4d. With these results, cap height, breadth of a sleeve and arm hole girth of existing sleeve pattern have been compared and analysed. The results are as follows; 1) According to the developmental figures of shell, the whole area change was small but that of shape was remarkable in M 4, 9, 13. The change of the Block 1 was particular. 2) Over arm length was contracted in all movements except M6 and under arm length expanded. The changes of sections a, b, c are large, while those of sections d, e are small. 3) In terms of latitudes, change of fore-arm region was small. The rate of scye girth varied from 14.3% of M13 to-5.6% of M2. The breadth of a sleeve expanded in all movements, and especially the front region expanded more than the back. 4) The relation between the shoulder length right and under axilla waist length, in all occasions, was contracted mutually, and one contracted, the other expanded. Therefore, in clothing construction when we consider the function of the arm it is better to widen the arm hole and the breadth of a sleeve at the same time than no widen the shoulder length by lowering the upper part of the upper side seam line.

• 동국한의학연구소논문집
• /
• 제5권
• /
• pp.79-95
• /
• 1996

When we see normal gait, gait cycle is seperated as stance phase and swing phase. It needs 6 determinant of gait of pelvic rotation, pelvic tilt, knee joint of stance phase, ankle and foot motion, ankle and knee motion, and pelvic movement to be accomplished. In addition, a joint and muscle action is accomplished biomechanically at the same time with its gait cycle. In oriental medicine, the relationships between chang-fu physiology and meridian physiology are summaried as follows ; ${\bullet}$ chang-fu physiology : Spleen manages the extremities. Liver manages soft tissues. Liver stores blood. Kidney stores essences. Kidney manages bones. ${\bullet}$ meridian physiology : The Leg Greater Yang Meridian and meridian soft tissues The Leg Yang-Myeong Meridian and meridian soft tissues The Leg Lesser Yang Meridian and meridian soft tissues The Leg Greater Yin Meridian and meridian soft tissues The Leg Lesser Yin Meridian and meridian soft tissues The Leg Absolute Yin Meridian and meridian soft tissues Especially, we can find out relations between in a "blood supplied feet can walk well" that explains "blood regulations and by liver nourishing effects"that is the closest concept of muscle. Abnormal gaits are due to three causes as following; first, physical defect secoud, pain third, nervous system or instability of muscle. In oriental medicine, we can know relationship in "atrophy, numbness, stroke, convulsion, muscular dystrophy of knee, rheumatoid arthritis, five causes of infantile growing defects, five causes of softening, sprain". Especially, atrophy is the most important symptom. Gait evaluation should be emphasized where a point can walk 8 feet to 10 feet considering stride width, stride length, the body weight center, stride number, flexion, extension, rotation of a joint as a standard factor. The point is we should find out something strange in a patient's side, front and back view. After that we should find out its cause as an index that we can observe abnormal findings in a joint and muscle.

• 한국가구학회지
• /
• 제20권5호
• /
• pp.504-516
• /
• 2009

Korean traditional architecture has been carried out in the manner that it harmonized surrounding natural environments and never disturbed them in the scale which did not overwhelm the nature, based on the view of architecture predicated on Yin Yang School. The exposed grain of the wood like pillar, hinge and house rafte, the linear expression of the construction material and the formation between the window and door monopolizing the front side presented a harmony with the nature showing the linear structure. Furthermore the ceiling is low due to the sit life style thanks to the ondol (Korean under-floor heating system and the furniture was made in simple manner to utilize the space as large as possible, for the interior was narrow and close, and also the furniture placing in the middle of the room was movably manufactured to improve the room space. Like this Korean traditional furniture was close associated with the low height and simplicity and harmonized with the blank of the wall accordingly, and it characterized linear & planar natural beauty focusing on the simple and refined unique beauty, because it was made in a good harmony with the interior utensils. This study has presented that the organic characteristics of Korean traditional aesthetic of architecture and the natural beauty being intrinsic in traditional furniture have a mutual relation on the basis of not only the visual recognition, also the aesthetic of naturalism made of the natural material, the constructional naivety as a frame method and the linear & planar formative beauty shown in appearance.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 하계학술대회 논문집 Vol.4 No.2
• /
• pp.942-945
• /
• 2003

Nerve gas sensor based on tin oxide was fabricated and its characteristics were examined. Target gas was dimethylmethylphosphonate($C_3H_9O_3P$, DMMP) that is simulant gas of nerve gas. Sensing material was $SnO_2$ added ${\alpha}-Al_2O_3$ with $4{\sim}20wt.%$ and was physically mixed. And then it was deposited by screen printing method on alumina substrate. Sensor device was consisted of sensing electrode with interdigit(IDT) type in front and heater in back side. Total size of device was $7{\times}10{\times}0.6mm^3$. Crystallite size of fabricated $SnO_2$ were characterized by X-ray diffraction(XRD, Rigaku) and morphology of the $SnO_2$ powders was observed by a scanning electron microscope(SEM, Hitachi). Fabricated sensor was measured as flow type and sensor resistance change was monitored real time using LabVIEW program. The best conditions as added $Al_2O_3$ amounts and operating temperature changes were 4wt.% and $300^{\circ}C$ in DMMP 0.5ppm, respectively. The sensitivity was over 75%. Response and recovery times were about 1 and 3 min., respectively. Repetition measurement was very good with ${\pm}3%$ in full scale.