• Journal of the Korean Ceramic Society
• /
• v.41 no.10 s.269
• /
• pp.783-787
• /
• 2004

Microwave dielectric properties and the microstructure of $Ba_5Nb_4O_{15}$ ceramics with $PbO-B_2O_3-SiO_2$ glass frit were investigated to reduce the sintering temperature of $Ba_5Nb_4O_{15}$ ceramics as a function of the amount of glass frit from $0.5wt\%$ to $10wt\%$ and the sintering condition. The sintered density and the microwave dielectric properties of $Ba_5Nb_4O_{15}$ ceramics were remarkably changed with the amount of glass fit which existed as a liquid phase and assisted the densification. $Ba_5Nb_4O_{15}$ with $3wt\%$ $PbO-B_2O_3-SiO_2$ glass frit sintered at $900^{\circ}C$ for 2 h showed dielectric constant (K) of 41.4, a quality factor (Q $\times$f) of 13,485 GHz, and a Temperature Coefficient of resonant Frequency (TCF) of 9 ppm/$^{\circ}C$. Due to no trace of physical and chemical reaction between this composition and Ag electrode cofired at $900^{\circ}C$ for 2 h, this ceramics can be a good candidate for the multilayer dielectric filter.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.33 no.6
• /
• pp.234-243
• /
• 2023

Zinc crystals of ZnO and SiO₂ in glaze raw materials, developed according to composition and firing requirements, are preferred because of their high decorative properties. However, most zinc crystal glazes have a high firing temperature and a narrow firing temperature range, making it difficult to use them as commercial glazes in ceramics. Therefore, in this study, it was expected that the firing temperature of a typical zinc crystal glaze could be lowered to below 1270℃ by using the eutectic effect through mixing frit, the main raw material used in manufacturing zinc crystal glaze. As a result, not only was the formation temperature of zinc crystals lower in the mixed frit glaze, but also the firing temperature range was widened to 1230~1270℃, making it possible to develop a glaze that produces crystals stably. The firing temperature was lowered to 1230~1250℃ and the holding temperature during cooling was lowered to about 950℃, resulting in the development of an economically effective glaze. When using a combination of frit, it has been shown that the holding temperature during cooling affects the recrystallization of zinc crystals depending on the composition of the glaze, and the crystal structure can be adjusted at this time. Additionally, the amount and shape of crystals can be controlled by using a nucleating agent.

• The Korean Journal of Ceramics
• /
• v.2 no.4
• /
• pp.226-230
• /
• 1996

A small amount of fine particle graphite was added to $\alpha$-SiC and $\beta$-SiC having certain particle distributions, and they were mixed clay and frit. After forming, they were sintered at 140$0^{\circ}C$ for 3 hours. Tribological properties of sintered $\alpha$-SiC-$\beta$-SiC-graphite-clay (frit) system showed that kinetic friction coefficient was 0.108, specific wear rate was 1.3${\times}10^-8\;mm^2$.$kgf^1$, and torque was 0.01kgf.cm at the wrench torque of 100 kgf.cm.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2005.07b
• /
• pp.1248-1251
• /
• 2005

In PDP, a transparent dielectric is formed on a front glass substrate so as to cover bus electrodes (Ag). During the fabrication process, sometimes, a transparent dielectric reacts with bus (Ag) electrode in the range of $560-600^{\circ}C$, and the reaction gives the dielectric its yellow coloration, what is called "yellowing phenomena". In this paper, we investigated the reaction between bus electrode and transparent dielectric covered with different frit content in Ag paste.

• Korean Journal of Materials Research
• /
• v.8 no.11
• /
• pp.1005-1010
• /
• 1998

실험계획법을 이용하여 유리분말의 소결시 그 기공량에 영향을 미치는 각종 소결조건의 영향을 정량적으로 조사하였다. 본 실험범위내에서 결합제 유리의 총기공량, 개기공량 그미고 폐기공량은 모두 소결온도에 의해 가장 큰 영향을 받고 그 다음으로 소결온도에서의 유지시간에 의해 영향을 받으며 승온속도의 경우 그 영향이 상대적으로 미미함을 확인할 수 있었다. 이러한 결과들로부터 실제공정에 있어 승온속도보다는 다른 소결인자, 특히 소결온도를 조절하는 것이 결합제 유리의 기공량 조절에 가장 중요하리라 판단되며 실험계획법을 이용함으로써 보다 정확한 공전조건을 모색할 수 있었다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2000.01a
• /
• pp.147-148
• /
• 2000

Sealing of two glass plates composing of FED panel was done in a vacuum chamber. Several factors related with a heating process of a frit glass were investigated, including comparisons with a conventional method.

• Proceedings of the Korean Ceranic Society Conference
• /
• 2003.10a
• /
• pp.149.2-149
• /
• 2003

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.11a
• /
• pp.307-307
• /
• 2008

전자부품에서 기존에 봉착, 코팅, 결합용 glass frit로 사용되어 왔던 Pb계 glass frit는 낮은 융점을 가지고 있고, 화학적으로도 매우 안정한 특성을 가지고 있다. 그러나 Pb계 glsss frit은 환경에 심각한 문제를 초래하기 때문에 이를 대체하기 위하여 저온에서 소성이 가능한 인산주석계를 기본조성계로 설정하였다. 인산주석계 glass의 취약한 내화학성, 내수성과 SnO의 환원에 의한 결정 석출 등의 문제를 해결하기 위하여 $R_2O_3$, RO 등을 첨가하여 glass frit의 특성을 향상시키고자하였다. 수분에 취약한 $P_2O_5$계 glass의 $R_2O_3$를 첨가하여 항온항습기를 이용하여 흡습성을 측정하고, 내수성에 가장 안정한 특성을 보이는 SnO-$P_2O_5-R_2O_3$ 계 glass 조성에 RO를 첨가하여 RO 첨가량에 따른 내산성과 내알칼리성의 변화를 관찰하였다. SnO-$P_2O_5-R_2O_3$계 glass의 RO첨가량에 따른 melting 특성의 변화를 flow-button test를 통해 관찰하였다. SnO-$P_2O_5-R_2O_3$계는 RO계의 변화에 따라 전이온도가 증가하고, 열팽창계수가 감소하는 결과를 보였다.

• Journal of the Korean Ceramic Society
• /
• v.51 no.3
• /
• pp.170-176
• /
• 2014

Effective glass frit compositions enabled to absorb laser energy, and to seal a commercial dye-sensitized solar-cell-panel substrate were developed by using $V_2O_5$-based glasses with various amounts of $TeO_2$ substitution. The latter was intended to increase the lifetime of the solar cells. Substitution of $V_2O_5$ by $TeO_2$ provided a strong network structure for the glasses via the formation of tetrahedral pyramids in the glass, and changed the various glass properties, such as glass transition temperature ($T_g$), dilatometric softening point ($T_d$), crystallization temperature, coefficient of thermal expansion (CTE), and glass flowage without any detrimental effect on the laser absorption property of the glasses. The thermal expansion mismatch (${\Delta}{\alpha}$) between the glass frit and the substrate could be controlled within less than ${\pm}5%$ by addition of 10 wt% of ${\beta}$-eucryptite. An 810 nm diode laser was used for the sealing test. The laser sealing test revealed that the VZBT20 glass frit with 10 wt% ${\beta}$-eucryptite was successfully sealed the substrates without interfacial cracks and pores. The optimum sealing conditions were provided by a beam size of 3 mm, laser power of 40 watt, scan speed of 300 mm/s, and 200 irradiation cycles.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2012.05a
• /
• pp.107.2-107.2
• /
• 2012

We used the electrophoretic deposition (EPD) process to fabricate a glass composite and investigated the EPD parameters to find the optimum deposition time by understanding the relationship among the process parameters of zeta potential (ZP), pH, deposition yield and saturation point. A binder and a dispersing agent were mixed properly with glass frit ($0.2{\sim}25{\mu}m$, d50=$8.77{\mu}m$) in an ethyl alcohol medium for the preparation of the slurry. The pH and ZP were in an inverse relationship to each other due to the generation of $H_3O^+$ ions with the addition of the dispersing agent in the slurry. The acidic nature of the dispersing agent was resulted in a decrease of the pH and an increase of the ZP. Otherwise, the pH increased with the addition of the glass frit in the slurry because $H_3O^+$ ions were absorbed on the glass frit. Therefore, the $OH^-$ ions correspondingly increased. The saturation point of EPD was strongly correlated with the variation of the pH in the slurry; this is caused by a chemical reaction between the ethyl alcohol and the ions that make up the glass frit. An adjustment of the pH variation and the saturation point in the slurry can be established with respect to the optimum deposition time in the slurry.