• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2004.05a
• /
• pp.337-341
• /
• 2004

This paper concerns the analytical modeling and dynamic analysis of advanced rotating blade structure implemented by a dual approach based on structural tailoring and viscoelastic materials technology. Whereas structural tailoring uses the directionality properties of advanced composite materials, the passive materials technology exploits the damping capabilities of viscoelastic material(VEM) embedded into the host structure. The structure is modeled as a composite thin-walled beam incorporating a number of nonclassical features such as transverse shear, warping restraint, anisotropy of constituent materials, and warping and rotary inertias. The VEM layer damping treatment is modeled by using the Golla-Mushes-McTavish(GHM) method, which is employed to account for the frequency-dependent characteristic o the VEM. The displayed numerical results provide a comprehensive picture of the synergistic implications of the application of both techniques, namely, the tailoring and damping technology on vibration response of thin-walled beam structure exposed to external time-dependent excitations.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2000.06a
• /
• pp.1555-1560
• /
• 2000

Recently, optical pickup actuators have been designed to have structures that extruded lens to decrease their height, because they are used in very thin drive for notebook computers. However, because of discordant and undesirable of forces that are supposed to happen in this design feature, subsidiary resonance such as rolling and pitching mode exert bad influence on actuator. In this paper, we presented force constituents to clarify the cause of subsidiary resonance and proposed new finite element analysis method to calculate force precisely, and performed frequency response analysis to evaluate characteristics of actuators. As a result, we could find out design parameters to diminish the influence of subsidiary resonance. Sample actuators designed with appropriate parameters were fabricated and put to practical tests. Comparing analysis with experimental results, we verified the accuracy of the analysis and the effectiveness of the method presented.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.20 no.2
• /
• pp.153-159
• /
• 2010

This work focuses on finding a method to reduce the noise of a hermetic reciprocating compressor during start-up using an acoustical analysis. The noise of compressor during start-up, which is a higher level than that of a normal operating condition, has transient and non-stationary characteristics. The acoustical analysis of compressor cavity is performed to find an effective method to reduce the noise level. In the acoustical analysis, the shape variations of frequency response function in the neighborhood of resonances are tested for three parameters: the height of remained oil, the suction position of refrigerant and the position of driving part. As a conclusion of this result, to reduce the emission noise of compressor during start-up, the height of remained oil should be kept at 16 mm, the refrigerant should be sucked at the cross point of nodal lines of X and Y directional cavity modes, and the driving part should be positioned in the center of cavity.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.26 no.1
• /
• pp.97-103
• /
• 2016

The sensitivity of interior noise that the passengers perceive is comparatively high in the train, and structure-borne and air-borne types of noises come into the train. In this paper, to analyze contributions of these noise sources operational transfer path analysis(OTPA) is used. OTPA has some advantages of executing the contribution rates of several sources simultaneously, and in this work, 29 points are measured while running. Transfer functions between reference measurement points and response measurement points are calculated by the singular value decomposition(SVD) and Principal component analysis(PCA) method, and the frequency characteristics of the noise source are successfully derived. Also the interior noise is predicted and compared with measurement data to show the reliability.

• Journal of the Korean Society for Precision Engineering
• /
• v.19 no.4
• /
• pp.161-167
• /
• 2002

For the purpose of applying to micro-actuator, thermal properties and displacement of electrostrictive polyurethane(PU) elastomers have been measured. In order to understand an effect of PU component, crosslinking agent are controlled by 0.5 wt% and 1 wt%. DMPA and anther chain extenders were used. PU sample that chain extenders are DMPA is added NaOH for comprehension of effect of ionic groups. The deposited electrode sire on PU films is equal to acrylic holder size when the displacement was measured. Dynamic response according to frequency, displacement and recovery time according to PU thickness were measured. 1 wt% crosslinking agent contents PU samples have higher displacement and lower recovery time than 0.5 wt% crosslinking agent contents PU. If the PU thickness is increased, the actuating voltage for generating of same displacement is increased, too.

• Journal of the Korean Society for Precision Engineering
• /
• v.14 no.8
• /
• pp.130-136
• /
• 1997

For compensating the error motion of hydrostatic guideways, we introduce a way that the clearance of table is actively controlled corresponding to the amount of error with the variable capillary. The structure and the theoretical design method of active controlled capillary using piezo actuator, named ACC, are proposed in this paper. Basic characteristics such as the maximum controllable range, micro step response and available dynamic bandwidth are tested for confirmation of structural suitability of ACC, and these characteristics are also tested on the table mounted with ACC for verifying the availability. The experimental result showed that by the use of ACC, the error motion within 2.7 .mu. m of a hydrostatic guideway can be compensated with the resolution of 2.7nm, 1/100 contollable range, and the frequency bandwidth of 5.5 Hz. From these results, it is confirmed that the ACC is very effective to improve the motion accuracy of high or ultra precision hydrostatic guideways.

• Journal of the Korean Society of Tobacco Science
• /
• v.14 no.1
• /
• pp.3-11
• /
• 1992

The present study examined various environmental and cultural media conditions for in vitro "rescue" of cross-fertilized ovules formed through sexual crosses between Nicotiana rustica and N. tabacum cv. BY4. The response ovules to two cultural procedures was compared; ovules were cultured either separately or left attached to the placenta. Total yield of seedlings and percent of normal seedlings were increased by culturing individual ovules separately, rather than on excised placenta. Total yield of seedlings and number of normal seedlings were produced following in vitro culture of individual fertilized ovules of N. rustica X M tabacum cv. BY4 at four days post-pollination on NN medium containing 2% sucrose. In the in vitro culture of fertilized ovules, high sucrose concentration increased the frequency of seedlings of abnormal appearance. Therefore, sucrose should be supplied to developing ovules at gradually decreased concentrations. Culture of fertilized ovules from three to eight days after pollination gave increased number of seedlings, but with delayed cultral time the number of morphologically normal seedling were decreased. Hybrids were uniform in appearance and showed vegetative heterosis but flower characteristics were generally intermediate between those of the parents. All hvbrids evaluated were self-sterile.f-sterile.

• Korean Journal of Veterinary Research
• /
• v.35 no.2
• /
• pp.307-315
• /
• 1995

The characterization of the MHC of domestic animals may constitute a first step towards increasing the efficiency of food production through improved disease resistance. In order to study the role of the MHC in regulating immune response it is first necessary to identify the different MHC alleles. In this research we try to investigate the possible associations between BoLA of Korean native cattles and infectious cattle disease. For this purpose we used one approach, serology. The results were summarized as follows : 1. Korean native cattle's lymphocyte reacted with alloantisera which recognized seven official BoLA allele. Korean native cattle's lymphocytes were reacted same as European breeds(especially with 673/3(W20)). 2. Korean native cattle's lymphocytes reacted with alloantisera 773/2, 673/3, 638/3, 773/3, 602/2, 639/2 and 639/3 at high reaction frequency. But alloantisera 642/1 was not expressed on Korean native cattle. If this allele, recognized by alloantisera(642/1), officially certificate In BoLA workshop it will be characterization factor of Korean native cattle. 3. According to cellular similarity index, we can presume on genetic relativity which has no family relationship.

• Progress in Superconductivity
• /
• v.13 no.3
• /
• pp.195-202
• /
• 2012

In this paper, we designed Active Magnetic Bearing (AMB) for large scale Superconductor Flywheel Energy Storage System (SFESS) and PD controller for AMB. And we experimentally evaluated SFESS including hybrid type AMB. The radial AMB was designed to provide force slew rate that was sufficient for the unbalance disturbances at the maximum operating speed. The thrust AMB is a hybrid type where a permanent magnet carries the weight of the flywheel and an electromagnetic actuator generates the dynamic control force. We evaluated the design performance of the manufactured AMB through comparison of FEM analysis and the results of experimental force measurement. In order to obtain gains of PD controller and design a notch filter, the system identification was performed through measuring frequency response including dynamics for the AMBs, a power amp and a sensor using a sine swept test method after levitating the flywheel. Through measuring the current input of the AMBs and the orbit of a flywheel according to rotational speed, we verified excellent control performance of the AMBs with small amount current for the large scale SFESS.

• Journal of the Korean Society of Food Culture
• /
• v.35 no.3
• /
• pp.265-277
• /
• 2020

This study was conducted to investigate dietary adaptations and use of university foodservice in Korea according to the religion of international students. The survey was conducted from April to June in 2017 and included 609 subjects studying at a university in Busan. Muslims showed the highest percentage of eating three meals per day (42.4%) but the highest rate of eating unbalanced meals (64.7%) and midnight meals (41.8%). The most frequent problematic eating habit among Buddhists was irregular mealtimes (46.0%). Adaptation frequency to Korean diet was lowest among Muslims and highest among Christians. Securing halal foods was difficult for Muslims in Korea, and demand for halal foods as a school restaurant menu was high. The response rate for experiencing Korean food at university foodservice was highest among Christians (79.7%) and lowest among Muslims (45.3%). The main reason for not using university foodservice for Muslims was "no menu to eat" for religious reasons, and other religious groups cited "lack of menu variety." Preferred types and recipes of meats, fish, and vegetables also showed significant differences according to religion. As a result, efforts should be made to increase adaptation to life abroad in Korea, including changes in university foodservice management, considering the religious characteristics of international students.