• Journal of the Korean Society of Food Culture
• /
• v.33 no.5
• /
• pp.403-410
• /
• 2018

This study was conducted to evaluate children's purchase behavior (frequency of snack consumption and purchase) and preference for high protein snack products developed for weight control and nutritional balance. A total of 80 elementary school students (from the 3rd to 6th graders) in the Gyeonggi-do learning center were participated and 76 were used for the analysis. The most common response for liking snacks was taste (71.4%), and the most preferred types of snacks were chips (42.1%) and puff snacks (34.2%). The highest frequency of snack ingestion was 1-3 times per week (48; 63.2%), and the main purchasers were parents (65.8%). Cheese, corn and chili flavors were more preferred than the control, while yogurt taste was slightly less preferred than the control. The results of this study showed the possibility of commercialization of new protein snacks according to children's seasoning preference and provide the insights into the snack preferences of children as main consumers.

• Journal of the Korea Institute of Building Construction
• /
• v.17 no.3
• /
• pp.287-294
• /
• 2017

Recently the construction project is becoming large-sized, complicated, and modernize. This has increased the uncertainty of construction risk. Therefore, studies should be followed regarding scientifically identifying the risk factors, quantifying the frequency and severity of risk factors in order to develop a model that can quantitatively evaluate and manage the risk for response the increased risk in construction. To address the problem, this study analyze the probability distribution of risk causes, the probability of occurrence and frequency of the specific risk level through Monte Carlo simulation method based on the accident data caused at construction sites. In the end, this study derives quantitative analysis by analyzing the amount of risk and probability distributions of accident causes. The results of this study will be a basis for future quantitative risk management models and risk management research.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.2
• /
• pp.285-297
• /
• 2015

In this paper, Ulta-WideBand (UWB) channel measurement and modeling based on compressive sampling (CS) are proposed. The sparsity of the channel impulse response (CIR) of the UWB signal in frequency domain enables the proposed channel measurement to have a low-complexity and to provide a comparable performance compared with the existing approaches especially used for the indoor geo-localization purpose. Furthermore, to improve the performance under noisy situation, the soft thresholding method is also investigated in solving the optimization problem for signal recovery of CS. Via numerical results, the proposed channel measurement and modeling are evaluated with the real measured data in terms of location estimation error, bandwidth, and compression ratio for indoor geo-localization using UWB system.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.23 no.6
• /
• pp.1267-1272
• /
• 2009

The purpose of this study is to survey the importance of items for the physiological and pathological symptoms for estimating a health condition according to Sasang constitution to establish the SHI(Sasangin Health Index) which will reflect the concept of inherent vitality. We surveyed expert opinion with questionnaires from 20 Sasang constitution specialists. The questionnaire was composed of 57 items on physiological and pathological symptoms and specialist opinions. Each item was marked from A to E according to importance in evaluating health state in each constitution, and if the mean score of an item was over 3.0, the item was regarded as important. Important indexes among physiological symptoms were diet, digestion condition, perspiration condition, frequency of defecation, heat and cold response, and temperature of drinking water in Soeumin, pathologic perspiration and defecation condition in Soyangin, repast, perspiration condition, and the amount of drinking water in Taeeumin, and urination frequency in Taeyangin. Important indexes among pathological symptoms were sighing, indigestion, and abdominal pain in Soeumin, oral condition, chest distress, brash, and amnesia in Soyangin, eye condition, palpitation, and edema in Taeeumin, and vomiting and incapacity of the lower limbs in Taeyangin. There are different health evaluating index and priority order in it according to Sasang constitution.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.16 no.5
• /
• pp.924-932
• /
• 1992

This paper presents the results of an experimental study on the characteristics of the vortex- induced vibration of an elastically supported circular cylinder in the cross air flow. For a range of velocities, power spectral densities of the signals from a hot-wire anemometer placed in the wake of an oscillating circular cylinder and gap sensors placed in the both ends of a circular cylinder were obtained to determine vortex-shedding frequencies, natural frequencies and vibrating frequencies of a cylinder. The effects of slots in the test section on vortex shedding and cylinder oscillation were investigated. The present study covered the reduced velocity range 1.0 .leg. Ur .leg. 64.6. The response characteristics of the cylinder has been shown to vary extensively, depending on the slots in the test section as well as on the reduced velocity. For an elastically supported cylinder, a purely translation mode oscillation was observed at a low velocity, however a rotation mode oscillation was often superposed for higher velocities. These two oscillating frequencies were equal to their natural frequencies irrespective of the changes of free stream velocities.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.2 no.1
• /
• pp.27-35
• /
• 1998

In this paper, we propose a novel spectral-chopping model of Class-II$(1+D)^2$ -PRS system which reveals improved spectral efficiency. We build up the model having spectrum chopped by the amount of Nyquist over-rate, and then compare its characteristics with the conventional model in both the time-domain and the frequency-domain. When the transmission system operates above the Nyquist rate, the new model has better performance than the conventional PRS using its inherent speed-tolerance. According to our investigations, Class-II PRS shows more excellent effect in the spectral-chopping method than Class- I and W types analyzed previously. We ascertain that the over-rate of 26.675 obtained by the inherent speed-tolerance could be improved upto 40% using spectrum-truncation. These effects come from the fact that the raised-cosine spectrum of Class-II PRS has smaller Boss of frequency component and energy than any other types for the same amount of truncation. In order to validate these theoretical results, we present their sidelobe-trends confirming cancellation effects at the sampling instants and some experimental results showing their patterns of eye-openings and spectra.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.2 no.3
• /
• pp.317-323
• /
• 1998

A synchronization is important element not only wire communication but also wireless communication. Especially, In SS(Spread Spectrum) communication method used GPS(Global Positioning System) synchronization is more important. A synchronous oscillator(SO) is a network which synchronizes, tracks, filter, amplifies and divides (if necessary) in a single process. Without an input signal, the SO is a free-running oscillator, oscillating at a frequency $w_0$, but phase changes $180^{\circ}$ within tracking range of SO. Therefore CPSO was used for this problem. The coherent phase synchronous oscillator(CPSO) is created by adding two external loops to the SO and has a wider tracking bandwidth and a zero-offset phase response (coherent) while maintaining the SO properties of high signal-to-rejection and fast frequency acquisition times. Therefore phase between input signal and output signal is synchronized. In this paper, GPS data recovery circuit has applied CPSO using front reference characters and has certified an excellent data recovery capability.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.13 no.12
• /
• pp.2662-2670
• /
• 2009

The effect of the reflector type for the SAW filter on the characteristics of the slanted finger IDT filter have been studied by computer simulation. The IDT was evaporated by Aluminum-Copper alloy. The design condition was optimized by the phase shift of the SAWfilter for WCDMA. We have employed that the number of pairs of the input and output IDT are 50 pairs and the thickness are $5,000{\AA}$, and the width and the space of reflector are $3.6{\mu}m$ and $2.0{\mu}m$, respectively. Frequency response of the fabricated SFIT filter has the property that the center frequency is about 190MHz and bandwidth at the 3dB is probably 8.2MHz. And we could obtain that the return loss is less then 16dB, the ripple characteristics is probably 4dB and the triple transit echo is less then 18dB after when we have matched impedance.

• Proceedings of the KIEE Conference
• /
• 2006.07c
• /
• pp.1621-1622
• /
• 2006

This paper presents the effect of driving waveform for piezoelectric bend mode inkjet printhead with optimized mechanical design. Experimental and theoretical studies on the applied driving waveform versus jetting characteristic s were performed. The inkjet head has been designed to maximize the droplet velocity, minimize voltage response of the actuator and optimize the firing frequency to eject ink droplet. The head design was carried out by using mechanical simulation. The printhead has been fabricated with Si(100) and SOI wafers by MEMS process and silicon direct bonding method. To investigate how performance of the piezoelectric ceramic actuator influences on droplet diameter and droplet velocity, the method of stroboscopy was used. Also we observed the movement characteristics of PZT actuator with LDV(Laser Doppler Vibrometer) system, oscilloscope and dynamic signal analyzer. Missing nozzles caused by bubbles in chamber were monitored by their resonance frequency. Using the water based ink of viscosity of 4.8 cps and surface tension of 0.025N/m, it is possible to eject stable droplets up to 20kHz, 4.4m/s and above 8pL at the different applied driving waveforms.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.28 no.8
• /
• pp.1165-1174
• /
• 2004

The purpose of this study was to survey on the actual condition disposable coveralls of railroad rolling stock maintenance workers. The data were obtained from 100 male workers of railroad rolling stock maintenance wearing disposable coveralls using a questionnaire. The results were as follows. Disposable coveralls were exchanged into new ones in a week or 1-2 weeks. The major reasons of the exchanges were ＇Because it was contaminated(76.2%)＇ and then ＇It was torn(23.0%)＇ The response to the wearing frequency was the highest in ＇As possible as freqeuntly＇, and then ＇Sometimes＇ When workers were reluctant to wear the coveralls, the first reason was heat owing to wearing the coveralls. Therefore, wearing frequency became lowered in Summer. The torn parts of disposable coveralls most frequently were around the armhole and the crotch. The contaminated parts followed with the cuffs, the arm, and then the back. The uncomfortable parts were around the neck and the armholes. Workers felt uncomfortable because of heat and sweat caused by garment design obstructed convective airflow. Second, they complained that the coveralls make them irritated in a toilet. Third, they dissatisfied with materials of coveralls because the soils like oil were soaked into the coveralls and stained on the inner clothing. In regard of the color of coveralls, worker＇s favorite color was blue. In regard of style, the preferences to the separate style with a hood and the coveralls style with a hood were 49.0% and 25.0%, respectively.