• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.34 no.4
• /
• pp.355-364
• /
• 2010

Filiform hairs that respond to movements of the surrounding medium are the mechanoreceptors commonly found in arthropods and vertebrates. In these creatures, the filiform hairs function as a sensory system for raider detection. Parametric analyses of the motion response of filiform hairs are conducted by using a mathematical model of an artificial flow sensor to understand the possible operating ranges of a microfabricated device. It is found that the length and diameter of the sensory hair are the major parameters that determine the mechanical sensitivities and responses in a mean flow with an oscillating component. By changing the hair length, the angular displacement, velocity, and acceleration could be detected in a wide range of frequencies. Although the torques due to drag and virtual mass are very small, they are also very influential factors on the hair motion. The resonance frequency of the hair decreases as the length and diameter of the hair increase.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.49 no.5
• /
• pp.51-58
• /
• 2012

Accurate transmission and estimation of the channel statistics affected by high Doppler spread is one of the main issues of concern for the latest and future mobile communication systems. Therefore, it is important to research in novel channel estimation techniques that overcome the limitations of conventional methods. In this paper, we propose a novel channel estimation method that, after a simple estimation in the first OFDM symbol, uses Kalman filter to predict the channel in the rest of OFDM symbols with pilot subcarriers. Our method is designed considering the lattice-type arrangement of pilot subcarriers in LTE-Advanced, since most of the studies so far focus on block-type or comb-type pilot arrangements. In addition, to optimize the results, we use the filtering of channel impulse response and Wiener Filter for the estimation of the channel frequency response in the rest of the subcarriers.

• Korean Journal of Veterinary Research
• /
• v.38 no.4
• /
• pp.730-736
• /
• 1998

To elucidate whether or not innervation of purinergic nerve and functional action of $P_{2X}$-, $P_{2Y}$-purinoceptor, the neurogenic effects of perivascular nerve stimulation were investigated using by physiograph recording system in isolated coronary artery of pig. 1. The contractile responses induced by perivascular nerve stimulation (20V, 0.5msec, 20sec) were the frequency (2~64Hz) dependent manner. 2. The neurogenic contractile responses induced by perivascular nerve stimulation were inhibited by the pretreatment with either ATP or adenosine ($10^{-7}{\sim}10^{-4}M$). 3. The neurogenic contractile responses induced by perivascular nerve stimulation (20V, 16Hz, 0.5msec, 20sec) were increased by the pretreatment with reactive blue 2, but were not affected by the pretreatment with 8-phenyltheopylline ($10^{-5}M$). 4. The neurogenic contractile responses induced by perivascular nerve stimulation (20V, 16Hz, 0.5msec, 20sec) were inhibited by the desensitization of the P2X-purinoceptor using by treatment of $10^{-5}M$, -methylene ATP as 3 times over again. The accomplished present study on isolated coronary artery of pig suggest that purinergic nerve is innervated and that the neurogenic contractile response was mediated by activation of $P_{2X}$-purinoceptor and the neurogenic relaxative response was mediated by activation of both $P_1$ and $P_{2Y}$-purinoceptor.

• Phonetics and Speech Sciences
• /
• v.4 no.3
• /
• pp.137-142
• /
• 2012

The aim of this study is to investigate the usefulness of the multiple-choice name matching test (MC-NMT) in adults with aphasia by comparing the Korean version of the Boston Naming Test (K-BNT) and subsets of the Korean version of the Western Aphasia Battery (K-WAB). Thirty-nine patients who suffer from aphasia participated in the study. All patients were examined by the K-BNT, MC-NMT and K-WAB. The MC-NMT consisted of the 30 original BNT object stimuli which were presented with four response choices (written words) with similar frequency, including one correct and three incorrect responses. Cards containing the drawings were presented to the patient one at time. An item was passed if the patient chose the correct response within 10 seconds. We subdivided two groups into a total group and a low K-BNT group (at and below 15 points). We evaluated the correlation between the K-BNT, MC-NMT score and production, naming, repetition, comprehension, reading and writing scores in subsets of the K-WAB. There was a highly positive correlation between the K-BNT score and naming score of the K-WAB in total patients. However, the MC-NMT was highly correlated with reading scores in the K-WAB. In low score K-BNT patients, the K-BNT strongly correlated with production, naming and repetition scores of the K-WAB. These findings mean that K-BNT reflects motor language function. However, the MC-NMT was strong correlated comprehension, reading and writing of the K-WAB. This finding reflects sensory language function. We suggest that the combination of K-BNT and newly developed MC-NMT will be useful to evaluate speech functions in aphasic patients.

• Journal of Drive and Control
• /
• v.17 no.2
• /
• pp.1-8
• /
• 2020

Recently, industrial systems are becoming quicker and lighter to enable the reduction of energy consumption and increase productivity. So the latest systems are more flexible and rapid than the previous systems. But, with this improvement, another problem has emerged, such as the increase in residual vibration when a system is started or stopped. The input shaper is a command generation method that can remove residual vibration. It can provide a solution to the problem of residual vibration in industrial systems. However, it is difficult to generate the input shaper in high order systems, such as a typical industrial system because the input shaper is induced from the system's vibration characteristics. This study focused on the extra insensitivity shaper that can compensate for the system's modeling error such as input dynamics, and the high order's system affection. A genetic algorithm was deployed to adjust a vibration limitation for the extra insensitivity of the input shaper. A plant is a low damping system that includes one zero and a pole. The fitness functions are an error signal of the system's response with normalized frequency variations. Verification of the suggested system is satisfied by comparison between the zero vibration derivative input shaper's response and the suggested one.

• Computational Structural Engineering
• /
• v.5 no.4
• /
• pp.93-102
• /
• 1992

The design of reactor internals requires the accurate vibration characteristics of each component for subsequent dynamic structural response analyses. For Korean standard nuclear power plant some modifications on the Control Element Assembly shroud from the reference design have been made, Since the shroud is complex in geometry having an array of vertical round tubes and webs in a square grid pattern, and being tied down by preloaded tie rods into position, it is planned to perform a vibration measurement program consisting of both experimental and analytical modal studies upon that component. The shroud modal testing was performed on the low frequency global survey to measure the first several modes. The analysis using the finite element model was also performed for the as-tested conditions. The natural frequencies and mode shapes from both test and analysis have been acquired and compared to be in good agreement. It is concluded that finite element model generated is good enough to be used in the design for the dynamic response analysis under various loading conditions.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.13 no.3
• /
• pp.373-384
• /
• 2000

To assess the safety of nonlinear steel frame structures subjected to short duration dynamic loadings, especially seismic loading, a nonlinear time domain reliability analysis procedure is proposed in the context of the stochastic finite element concept. In the proposed algorithm, the finite element formulation is combined with concepts of the response surface method, the first order reliability method, and the iterative linear interpolation scheme. This leads to the stochastic finite element concept. Actual earthquake loading time-histories are used to excite structures, enabling a realistic representation of the loading conditions. The assumed stress-based finite element formulation is used to increase its efficiency. The algorithm also has the potential to evaluate the risk associated with any linear or nonlinear structure that can be represented by a finite element algorithm subjected to seismic loading or any short duration dynamic loading. The algorithm is explained with help of an example and verified using the Monte Carlo simulation technique.

• Proceedings of the IEEK Conference
• /
• 2005.11a
• /
• pp.1273-1278
• /
• 2005

In this thesis, a 2 stage 6-pole bandpass filter(BPF) is designed and implemented by using triple-mode cavity for satellite payload system. The BPF has a 100MHz bandwidth at the center frequency of 14.5GHz(Ku-band) and the response of the filter is the Chebyshev function. The cavity filter uses two orthogonal $TE_{113}$ modes and one $TM_{012}$ mode. The coupling between the adjacent cavityes(intercavity coupling) results in a Chebyshev response and is accomplished by only H-filed component of TE modes. The size and location of intercavity slot is determined by the coupling equation from E- and H-field of TE and TM resonant modes in circular cavity. The 2-stage 6-pole triple-mode cavity BPF has the insertion loss of 2.4dB and the reflection loss of 15dB in the passband. The triple-mode BPF proposed in this thesis can be used as channel filters for satellite payload system and can minimize filter assembly in general wireless communication system.

• Journal of the Korean Society of Safety
• /
• v.35 no.1
• /
• pp.53-61
• /
• 2020

This study proposes a new damper configuration for seismic performance improvement of heavy sliding facilities inside a building. For this purpose, we deal with two connection types of control system, and the parametric study has been performed to investigate their comparative seismic performances according to the variations of the control capacity. In order to simulate the seismic responses of the proposed system, we employed a recently-developed seismic response analysis method that can deal with the two-mass system with nonlinear frictional sliding behavior. The numerical results demonstrate that the typical method of diagonal bracing damper connection can exhibit effective control performance both on structure and the heavy sliding facilities, whereas the structure-facilities connection method does not show any control effect on both responses. On the other hand, the typical method has some limitations that it can adversely cause excessive sliding of the facilities, depending upon the frequency characteristics of structure and earthquake. On the contrary, the structure-facilities connection method is very effective in reducing the sliding displacement of the heavy facilities, even with small amount of control capacity. Thus, the following potential expectations can be inferred from these results: The typical diagonal bracing damper connection method will have some promising benefits in controlling the sliding facilities inside the building as well as the building itself, and the structure-facilities connection method can be a cost-effective way of protecting the internal heavy important facilities inside the structure already designed with sufficient seismic performance.

• Smart Structures and Systems
• /
• v.20 no.1
• /
• pp.85-97
• /
• 2017

The aim of this research is to develop a new method to use magnetorheological (MR) damper for vibration control. It is a new way to achieve the MR damper response without the need to have detailed constant parameters estimations. The methodology adopted in designing the control structure in this work is based on the experimental results. In order to investigate and understand the behaviour of an MR damper, an experiment is first conducted. Force-displacement and force-velocity responses with varying current have been established to model the MR damper. The force for upward and downward motions of the damper piston is found to be increasing with current and velocity. In cyclic motion, which is the combination of upward and downward motions of the piston, the force with hysteresis behaviour is seen to be increasing with current. In addition, the energy dissipated is also found to be linear with current. A proportional-integral-derivative (PID) controller, based on the established characteristics for a quarter car suspension model, has been adapted in this study. A fuzzy rule based PID controller (F-PID) is opted to achieve better response for a varying frequency input. The outcome of this study can be used in the modelling of MR damper and applied to control engineering. Moreover, the identified behaviour can help in further development of the MR damper technology.