• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.3A
• /
• pp.291-303
• /
• 2006

In this paper, we analyze functional requirements of the IEEE 802.22 WRAN, and propose a downlink 프레임 structure satisfying the requirements. The proposed downlink 프레임 structure maximizes e transmission efficiency by adopting the cognative radio to assign the sub-channel by reflecting the channel environment of WRAN. We also calculate the signalling overhead for both downlink and uplink, and analyze the performances of time synchronization, frequency synchronization and cell identification based on the 프리앰블 in downlink and suggest the channel estimation method tough 프리앰블 or pilot. As a final result, e stationary beamforming (SBF) algorithm with dynamic channel allocation(DCA) is proposed. The proposed OFDMA downlink 프레임 structure with channel adaptive sub-channel allocation for cognitive radio applications is verified to meet the requirements of IEEE 802.22 WRAN, by computer simulations.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39B no.9
• /
• pp.606-613
• /
• 2014

The Internet of Things (IoT), which has recently attracted attention as next-generation IT industry, is based on a wired and wireless network platform that can connect various Things. However, it is challenging to implement the IoT platform because of the heterogeneity of the network. Particularly, the ZigBee transmission may be significantly harmed due to Wi-Fi with the relatively much higher power, and this is one of the reason making the platform implementation difficult. In this paper, the ZigBee transmission is measured and analyzed by the BEB algorithm for finding the slot time when ZigBee can transmit, and an actual transmission happens stochastically depending on the network environment. The simulation results show that it guarantees high success rate of the ZigBee transmission by overcoming Wi-Fi interference in the 2.4 GHz frequency band.

• Journal of Environmental Health Sciences
• /
• v.39 no.1
• /
• pp.71-82
• /
• 2013

Objectives: This study was performed in order to investigate hand hygiene practices among food-service businesses employees based on the awareness of hand-washing and load of indicator bacteria on their hands. It focused on the comparison of full-time and part-time workers in food-service workplaces. Methods: A direct-interview questionnaire survey and microbiological analysis were carried out with sixty workers each. Samples for microbiological analysis were collected through a modified glove-juice method from the hands of the food-service workers and were analyzed for aerobic plate count, total coliform, fecal coliform, Escherichia coli, Staphylococcus aureus, and Salmonella spp. Microbiological analysis was done according to the Food Code of Korea. Results: Significant differences (p<0.01) were found in the survey between the full-time and part-time workers in hand-washing frequency, use of hand-washing agents, and hand-drying methods. More full-time workers responded to washing their hands after preparing food, after visiting outside, after handling raw materials, and before putting on gloves/when changing gloves than did part-time workers (p<0.05). No remarkable difference was found in bacterial load on the hands except in the aerobic plate count between the two groups. The detection of E. coli, S. aureus, and Salmonella spp. on the hands of some food-service workers in both groups revealed poor hand hygiene practices. Conclusions: The results of this study indicate that there is a need for training programs in order to improve hand hygiene practices and strict hand hygiene compliance by food-service workers.

• Journal of Society of Preventive Korean Medicine
• /
• v.14 no.1
• /
• pp.37-48
• /
• 2010

Objective : The purpose of this research was to provide basic data for developing the collaborating care of Korean traditional medicine and western medicines by analyzing the perceptions of residents visiting local health centers on the collaborating care. Method : To this end, a self-administrated questionnaire was surveyed to 417 participants from March 10 to March 19, 2005. The questionnaires were regarding medical preferences, effectiveness, co-operative treatment types, and the demographic characteristics of the study population. The main statistical methods employed for analysis were frequency chi-square test analysis, using SPSS system 12.0 software for Windows. Result : First, the perceptions of collaborating care, such as preference and effectiveness, were better for residents who had experienced Korean traditional medicine(p < 0.05). Second, the most favorable collaborating care type was the neuromuscular disease and rehabilitation, and in particular, the preference of the patient who had experienced Korean traditional medicine was much higher than those who had not experienced it(p < 0.05). Third, as for recognizing the future of collaborating care, respondents insisted that collaboration care has to be conducted under evidence-based research. The reasons why collaborating care has not been active were reported as "difference in solving disease problems between oriental medicine and western medicine." The most important role of the Korean traditional medicines in the public sector was to provide specialized service for the elderly and low income households. Conclusion : Most respondents expected the positive effects of the collaborating care and wanted it to develop, particularly for neuromuscular diseases. As for the health promotion program in health centers, it was more popular than the home visiting program for the elderly and preventive rehabilitation for stroke. Now we must plan to balance between the need of the community and the medical provider on collaborating care.

• Journal of The Institute of Information and Telecommunication Facilities Engineering
• /
• v.1 no.2
• /
• pp.4-18
• /
• 2002

In this paper, we propose the new design method for the OFDM based modem that is considerd a standard of wireless communication in indoor environments. We designed a improved FFT/IFFT in order to satisfy a data rate $6{\sim}54$Mbps required homenetworking of high speed and a improved channel equalization circuit using pilot signals for modile environments. And we designed a carrier offset estimator that uses the $tan^{-1}$ circuit to organize a memory structure. All steps are verifed performance through a FPGA and are implemented ASIC to use a standard library cell.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• v.1
• /
• pp.205-210
• /
• 2006

The impact forces of the highly nonlinear waves are one of the important factors in designing the ocean structures. The impact forces are very difficult to analyze numerically and experimentally because they are impulsive in magnitude and occur instantaneously. In this study the numerical program based on N.S. equations are used to investigate the impact forces of steep waves where the waves are gene rated by the wave maker in the numerical wave basin. The arbitrary steep waves are generated by the superposition of waves of single frequency and the impact forces on vertical cylinder are simulated on the multiblock grids. V.O.F. and the local height function methods are used to track the free surfaces. To validate the numerical analysis the numerical results are compared with the experimental ones and the acceptable agreements are found. It is thought that more studies on the simulations of the incoming breaking waves and the impact forces on the vertical cylinder should be made to obtain the useful results to be applied in the offshore design.

• Proceedings of the KIPE Conference
• /
• 2001.07a
• /
• pp.247-251
• /
• 2001

Universal motors are mainly used for vacuum cleaner application. There are a lot of researches on SRM that applys home appliance throughout the world. The manufacturing cost of SRM drive makes it hard to expand its application to home appliance. This paper presents Single Phase SRM for the vacuum cleaner that has advantge in cost and performance over conventional universal motor. This paper proposes new power device driving scheme by using SRM switching characteristic. The driving scheme is very simple and inexpensive. Dwell Time Control method is used for the minimum switching loss of power device. The switching frequency of power device is less than 4.5kHz at 45,000rpm. By use of this scheme, power device based on very small switching losses can be used on SRM drive. Also, the biggest problem in single phase SRM is starting, this paper shows a new starting algorithm with two hall sensors, accelerating and running sensors, respectively. Finally, the proposed Single Phase SRM achieves higher efficiency and long life time compared to universal motor. Its life time is more than 1500 hours. Its life time is extended 4 times than that of conventional motor and its suction power is increased $20\%$ at the same volume of conventional universal motor.

• Journal of Information Technology Services
• /
• v.15 no.4
• /
• pp.97-109
• /
• 2016

The rapid deployment of millions of mobile sensors and smart devices has resulted in high demand for opportunistic encounter-based networking. For the cooperative video surveillance of dashboard cameras in nearby vehicles, a fast and energy-efficient asynchronous neighbor discovery protocol is indispensable because a dashboard camera is an energy-hungry device after the vehicle's engine has turned off. In the existing asynchronous neighbor discovery protocols, all nodes always try to discover all neighbors. However, a dashboard camera needs to discover nearby dashboard cameras when an event is detected. In this paper, we propose a fast and energy-efficient asynchronous neighbor discovery protocol, which enables nodes : 1) to have different roles in neighbor discovery, 2) to discover neighbors within a search range, and 3) to report promptly the exact discovery result. The proposed protocol has two modes: periodic wake-up mode and active discovery mode. A node begins with the periodic wake-up mode to be discovered by other nodes, switches to the active discovery mode on receiving a neighbor discovery request, and returns to the periodic wake-up mode when the active discovery mode finishes. In the periodic wake-up mode, a node wakes up at multiples of number ${\alpha}$, where ${\alpha}$ is determined by the node's remaining battery power. In the active discovery mode, a node wakes up for consecutive ${\gamma}$ slots. Then, the node operating in the active discovery mode can discover all neighbors waking up at multiples of ${\beta}$ for ${\beta}{\leq}{\gamma}$ within ${\gamma}$ time slots. Since the proposed protocol assigns one half of the duty cycle to each mode, it consumes equal to or less energy than the existing protocols. A performance comparison shows that the proposed protocol outperforms the existing protocols in terms of discovery latency and energy consumption, where the frequency of neighbor discovery requests by car accidents is not constantly high.

• KIPS Transactions on Computer and Communication Systems
• /
• v.7 no.8
• /
• pp.203-210
• /
• 2018

Mobile traffic is increasing consistently, and mobile carriers are becoming more and more hard to meet this ever-increasing mobile traffic demand by means of additional installation of base stations. To overcome this problem, heterogeneous networks, which can reuse space and frequency by installing small cells such as femto cells in existing macro cells, were introduced. However, existing macro cell users are difficult to increase the spectral efficiency without the cooperation of femto owners. Femto owners are also reluctant to accommodate other mobile stations in their femto stations without proper incentive. In this paper, a method of obtaining the optimal incentive is proposed, which adopts a utility function based on the logarithm of throughput of mobile stations, and the incentive is calculated to maximize the utility of the entire network.

• Journal of Power Electronics
• /
• v.16 no.1
• /
• pp.227-237
• /
• 2016

A novel digital current control strategy for digitally controlled DC-DC switching converters, referred to as Adjacent Cycle Sampling (ACS), is proposed in this paper. For the ACS current control strategy, the available time interval from sampling the current to updating the duty ratio, is approximately one switching cycle. In addition, it is independent of the duty ratio. As a result, the contradiction between the processing speed of the hardware and the transient response speed can be effectively relaxed by using the ACS current control strategy. For digitally controlled buck DC-DC switching converters with trailing-edge modulation, digital current control algorithms with the ACS control strategy are derived for three different control objectives. These objectives are the valley, average, and peak inductor currents. In addition, the sub-harmonic oscillations of the above current control algorithms are analyzed and eliminated by using the digital slope compensation (DSC) method. Experimental results based on a FPGA are given, which verify the theoretical analysis results very well. It can be concluded that the ACS control has a faster transient response speed than the time delay control, and that its requirements for hardware processing speed can be reduced when compared with the deadbeat control. Therefore, it promises to be one of the key technologies for high-frequency DC-DC switching converters.