• Journal of the Korea Society of Computer and Information
• /
• v.15 no.7
• /
• pp.83-90
• /
• 2010

In vocabulary recognition system has reduce recognition rate unrecognized error cause of similar phoneme recognition and due to provided inaccurate vocabulary. Input of inaccurate vocabulary by feature extraction case of recognition by appear result of unrecognized or similar phoneme recognized. Also can't feature extraction properly when phoneme recognition is similar phoneme recognition. In this paper propose vocabulary recognition post-process error correction system using phoneme likelihood based on phoneme feature. Phoneme likelihood is monophone training phoneme data by find out using MFCC and LPC feature extraction method. Similar phoneme is induced able to recognition of accurate phoneme due to inaccurate vocabulary provided unrecognized reduced error rate. Find out error correction using phoneme likelihood and confidence when vocabulary recognition perform error correction for error proved vocabulary. System performance comparison as a result of recognition improve represent MFCC 7.5%, LPC 5.3% by system using error pattern and system using semantic.

• Journal of the Ergonomics Society of Korea
• /
• v.32 no.4
• /
• pp.389-396
• /
• 2013

Objective: The ride qualities of the six passenger cars were evaluated in 4 subjects on the highway and uneven road. The relation between vibration with driving velocity and driving posture were also investigated separately. Background: Ride comfort plays an important role in the vehicle design. Vibration is the one of the principal components associated with ride comfort. Method: The acceleration of the foot, hip and back were measured using B&K accelerometers in this study. The velocity of the passenger cars was maintained at a constant speed of 80km/h on the highway and 40km/h on the uneven road. For evaluating the effects of driving velocity and driving posture on vehicle's vibration level, separate experiments were performed on the highway with 5 different vehicle speeds and 5 different backrest angles, respectively. Results: The overall ride value of the luxury car showed the best result while the smaller car showed the worst value on the highway. On the uneven road the overall ride value level was increased 75~98%. All the vehicles had the SEAT value less than 1. Faster the velocity lowers the SEAT value. The ride quality in terms of vibration gets worst when the backrest angle increased. Conclusion: The smaller car had a first mode at the higher frequency and showed higher vibration level. SEAT value was mostly affected by the seat property not by vehicle. We ranked the luxury car seat had a best vibration reduction quality than others based on SEAT values. When the driving velocity increased, the overall ride values were increased proportionally and the SEAT values were somewhat decreased. Application: Evaluation of whole-body vibration in the passenger car.

• Journal of the Korean Dietetic Association
• /
• v.14 no.4
• /
• pp.337-350
• /
• 2008

The principal objective of this study was to assess the nutritional status and dietary quality in low-income elderly individuals residing at home (LH) or in health care facilities (LHCF) with dietitian. This study was conducted via anthropometric measurements, questionnaire interviews, and dietary surveys using a 24 hr recall method with 120 low-income elderly individuals (LHCF=46, LH=74). The average ages of the LH and LHCF group were 76.3 years and 78.6 years, respectively. The LH group evidenced a significantly higher frequency of skipping meals than the LHCF group. The average energy intakes of the LHCF and LH group were 1921.0 kcal and 1443.9 kcal, with a significant difference (p<0.001). Most of the nutrient intake and intake rates for recommended intake were significantly higher among the LHCF group as compared with the LH group. The LHCF group showed significantly higher values for the nutrient adequacy ratio (NAR), the mean adequacy ratio (MAR), nutrient density (ND), and the index of nutritional quality (INQ) by dietary qualitative estimation than in the LH group. The Korean diet diversity scores (KDDS) were 3.66 for LH group and 4.93 for the LHCF group, thus were significantly higher in the LHCF group than in the LH group. The results of the present study demonstrate that the LH group appeared to experience more dietary problems than the LHCF group. It was suggested that nutritional education is needed for low-income elderly individuals living at home, in order for them to learn proper dietary management. This can be achieved via educational programs in social welfare institutions, incentives toward employment as a dietitian, and implementation of community-based support.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.46 no.5
• /
• pp.162-166
• /
• 2009

In this paper, we propose a novel approach of an acoustic echo cancellation (AEC) algorithm which is differently adopted in the relevant period condition by the suppression parameter of a parametric wiener filter (PWF). The PWF uses the suppression parameter to compensate uncertainty of acoustic echo signal estimation. The existing PWF method using the fixed suppression parameter derives the distortion of the near-end signal at the double-talk. To solve this problem, the boundary condition is devised using decision of the double-talk detection (DTD) algorithm and voice activity detector (VAD). The boundary condition makes it possible to treat differently depending on the case of the single-talk and double-talk. According to the experimental results, the proposed approach is found to be effective for acoustic echo cancellation using the boundary condition.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.41 no.8
• /
• pp.51-57
• /
• 2004

We have analyzed the effect of out-band dispersion in the cascaded fiber Bragg Elating(FBG) based optical add-drop multiplexers(OADM) when bypassed wavelengths contain SCM signals. In order to compute this impairment the dispersion characteristics of FBG have been analytically calculated by solving their coupled wave equations, and the Fourier method is applied to IMD analysis. The out-band dispersion effects over WDM/SCM signals are analyzed under different and common system situations as: ITU channel spacing(100, 50, 25 GHz), channel density parameter, frequency extension of the SCM plan, modulation characteristics, FBG length, etc. From this results, the transport of WDM/SCM signals in future DWDM transport networks could be limited by this effect which has to be taken into account for designing future networks.

• Corrosion Science and Technology
• /
• v.19 no.4
• /
• pp.163-173
• /
• 2020

Cavitation corrosion in many industrial plants has recently become a serious issue. Cavitation corrosion has generally been investigated using a vibratory method based on ASTM G32 standard, and the test can be divided into direct cavitation and indirect cavitation. Cavitation corrosion test uses the vibration frequency of the horn of 20 kHz with constant peak-to-peak displacement amplitude. In this work, the peak-to-peak amplitude was controlled from 15 ㎛ to 85 ㎛, and electrochemical measurements were obtained during indirect cavitation. The relationship between cavitation corrosion rate and electrochemical properties was discussed. Corrosion steps of carbon steel at the initial stage under cavitation condition in 3.5 % NaCl can be proposed. When the cavitation strength is relatively low, corrosion of the steel is more affected by the electrochemical process than by the mechanical process; but when the cavitation strength is relatively high, corrosion of the steel is affected more by the mechanical process than by the electrochemical process. This work confirmed that the critical ultrasonic amplitude of 0.42 %C carbon steel is 53.8 ㎛, and when the amplitude is less than 53.8 ㎛, the corrosion effect during the cavitation corrosion process is higher than the mechanical effect.

• The Journal of Korean Academic Society of Nursing Education
• /
• v.12 no.2
• /
• pp.178-186
• /
• 2006

Purpose: This study is aimed to examine the effectiveness on pain, feeling and nursing practice of hand reflexology applied to in-patient in the clinical setting. Method: The pre/post test methods using VAS for pain and feeling, physiologic measuring, and questionnaire of nursing care were conducted. Subjects were selected 45 in-patients from a surgical ward in hospitals during Nov.-Dec. 2005. 5 minute hand reflexology therapy was applied to both hands of participant by two research assistants at the same time. Data were analyzed based on SAS program using frequency, $x^2$-test, paired t-test, ANOVA and Pearson's correlation coefficients. Result: 1. After receiving hand reflexology therapy, the subjects showed significant pain relief(t=-4.94, p=.0001), improvement in feeling(t=19.44, p=0001) and an increase in skin temperature(t=3.54, p=.001). 2. The applied skills that the participants preferred were press-rotate(80.0%), press-walk(35.56%) and press-rolling(31.11%). The effectiveness of nursing practice scored $3.99{\pm}1.97$ out of 5. Nurse-Patient Relationship and effective response of nursing intervention ranked the highest 4.31. Conclusion: Hand reflexology was considered as an effective nursing intervention in the clinical settings, but in order to evaluate re-verifies and reliances for this effects, it is necessary that comparative studies should be conducted.

• Structural Engineering and Mechanics
• /
• v.40 no.5
• /
• pp.637-654
• /
• 2011

The present paper studies the variation of the natural frequencies and mode shapes of rectangular plates carrying a three degree-of-freedom spring-mass system (subsystem), when the subsystem changes (stiffness, mass, moment of inertia, location). An analytical approach based on Lagrange multipliers as well as a finite element formulation are employed and compared. Numerically reliable results are presented for the first time, illustrating the convenience of using the present analytical method which requires only the solution of a linear eigenvalue problem. Results obtained through the variation of the mass, stiffness and moment of inertia of the 3-DOF system can be understood under the effective mass concept or Rayleigh's statement. The analysis of frequency values of the whole system, when the 3-DOF system approaches or moves away from the center, shows that the variations depend on each particular mode of vibration. When the 3-DOF system is placed in the center of the plate, "new" modes are found to be a combination of the subsystem's modes (two rotations, traslation) and the bare plate's modes that possess the same symmetry. This situation no longer exists as the 3-DOF system moves away from the center of the plate, since different bare plate's modes enable distinct motions of the 3-DOF system contributing differently to the "new' modes as its location is modified. Also the natural frequencies of the compound system are nearly uncoupled have been calculated by means of a first order eigenvalue perturbation analysis.

• Journal of the Korean Society for Railway
• /
• v.10 no.1 s.38
• /
• pp.57-66
• /
• 2007

1974. 8. 15 SeoulMetro, beginning with the first electric railway established at six cities, so it is managing mass transportation of traffic. Especially, in case of seoul, It is managing that from one to eight lines, 286.9km, 265 stations have installed and now it is carrying about 5.5million of passengers everyday, and 2,000million passengers a year. So accident is increasing from the station every year. For this measure, SeoulMetro prepares safety fence for passengers crash but, as suicides or people who watch the accident took place, for at the bottom of passengers crash protection, PSD installing is needed. Even though, PSD is managing ATO section but, in controlling SeoulMetro, one to four lines sections are (ATS, ATC)section. Between as ATS, ATC section, ATO section, subway gate and PSD must have opened and crossed always at the time. And the interlock control corrosion protection gate, managing skills with installation, method, using in history, apply to 10rail cars one train sets, and maximum applying 2224% sections of passengers congested that consideration is to be needed. So 2004, SeoulMetro improved technology and basie design of PSD at ATS section. Based on this, from 2005.4 to 2006.6, using subway 2lines per 12stations set the model installation(full type 11stations, half type 1station) After installing in case of success, it is going about to suggest that effective analysis and hereafter subject.

• Journal of Home Health Care Nursing
• /
• v.24 no.2
• /
• pp.210-220
• /
• 2017

Purpose: The study aimed to describe the utilization of home healthcare in patients using home mechanical ventilator(HMV) Method: A descriptive cross-sectional design was used in this study. A Questionnaires were sent to nation wide home healthcare agencies to assess their utilization status of home healthcare. A convenience sample of 158 patients data was reviewed. Result: A total of 88(55.7%) men with the mean age of 51.94(${\pm}19.52$) years were included in the study. Approximately 55.1% of patients at the outpatient department were referred to the home healthcare services after discharge. The underlying diseases were as follows : 129 amyotrophic lateral sclerosis and 27 muscular dystrophies. A total of 155 patients have invasive HMV. Efficient home healthcare nursing activities provided by a highly skilled home healthcare advanced practice nurses(HHCAPN) were tracheotomy and gastrostomy tube management and urinary catheterization. The average frequency of home visit for one patient was 2.52times per month. The duration of home healthcare utilization with >1 year was 82.9%. HHCAPNs have limited knowledge and skill for HMV. Conclusion: The government support is required to provide sufficient home healthcare services to the patients discharged with HMV. HHCAPNs should be properly educated on the effective HMV care.