• International Journal of Fluid Machinery and Systems
• /
• v.10 no.2
• /
• pp.146-153
• /
• 2017

Sediment flow through hydropower components causes hydro-abrasive erosion resulting in loss of efficiency, interruptions in power production and downtime for repair/maintenance. Online instruments are required to measure/capture the variations in sediment parameters along with collecting samples manually to analyse in laboratory for verification. In this paper, various sediment parameters viz. size, concentration (TSS), shape and mineral composition relevant to hydro-abrasive erosion were measured and discussed with respect to a hydropower plant in Himalayan region, India. A multi-frequency acoustic instrument was installed at a desilting chamber to continuously monitor particle size distribution (PSD) and TSS entering the turbine during 27 May to 6 August 2015. The sediment parameters viz. TSS, size distribution, mineral composition and shape entering the turbine were also measured and analysed, using manual samples collected twice daily from hydropower plant, in laboratory with instruments based on laser diffraction, dynamic digital image processing, gravimetric method, conductivity, scanning electron microscope, X-ray diffraction and turbidity. The acoustic instrument was able to capture the variation in TSS; however, significant deviations were found between measured mean sediment sizes compared to values found in the laboratory. A good relation was found for turbidity ($R^2=0.86$) and laser diffraction ($R^2=0.93$) with TSS, which indicated that turbidimeter and laser diffraction instrument can be used for continuous monitoring of TSS at the plant. Total sediment load passed through penstock during study period was estimated to be 15,500 ton. This study shall be useful for researchers and hydropower managers in measuring/monitoring sediment for hydro-abrasive erosion study in hydropower plants.

• Journal of Environmental Health Sciences
• /
• v.39 no.3
• /
• pp.223-229
• /
• 2013

Objectives: In an effort to examine the distribution of THMs (Trihalomethane) generated from chlorine disinfection by the drinking water treatment plants located on the east coast region of Gangwon-do, this study surveyed the distribution and concentrations of each component of THMs twice per month for 5 years from 2008 to 2012. Fluctuation pattern in the seasonal generation amount was identified. In addition, the correlation between the concentration of organic substances in water and THMs was assessed, along with stability of purified water quality supplied by the water treatment plants on the east coast by analyzing the composition ratio of each component that constitutes THMs and the detection frequency. Method: The research was done on purified water supplied by 29 water treatment plants in 7 cities and counties (Goseong-gun, Sokcho-si, Yangyang-gun, Gangneung-si, Donghae-si, Samcheok-si, Taebaek-si) located in Gangwon-do on the east coast. Water samples were collected twice a month from 2008 to 2012 and were investigate for chloroform, bromodichloromethane (BDCM), dibromochloromethane (DBCM), and bromoform, based on analysis through Purge-Trap (Tekmar 3000) devices using FID-attached GC (HP 6890, Hewlett Packard). Result: THMs concentration detected at Gangneung-si was 0.0086mg/L, Goseong-gun 0.0019mg/L, Donghae-si 0.0099 mg/L, Samcheok-si 0.0016 mg/L, Sokcho-si 0.0057 mg/L, Yangyang-gun 0.0027 mg/L and Taebaek-si 0.0038 mg/L. As the THMs composition rate, chloroform constitutes 51.4% followed bybromodichloromethane 22.3%, bromoform 15.2% and dibromochloromethane 11.1% respectively. Conclusion: Throughout the entire THMs survey areas and period, the maximum concentration was 0.072mg/L, which did not exceed the water quality standards (0.1 mg/L), and the overall average concentration was very low at 0.0044 mg/L.

• The Journal of Engineering Geology
• /
• v.2 no.2
• /
• pp.113-130
• /
• 1992

Groundwater in crystalline basement is controlled primarily by tectonic fractures. It is evident that the delineation of the heavily faulted area and/or fractures deeply developped should be considerable value in deep-seated low enthalphy geothermal water. Electrical and electromagnetic methods have effectively been employed to map hydraulic faults and shear zones for groundwater exploration. In this study VLi; dipoledipole resistivity, controlled source audio~frequency magneto-telluric(CSAMT) and magnetic methods were applied in the Bomun resort area, adjacent to Kyongju city, southeastern part of Korea. The integrated geophysical tools employed in this experiment can be manifested themselves as: 1. Magnetic high for granite intrusions which is more favorable for geothermal gradient increase in depth. 2. VLF cross-over trends for mapping linear shallow conductive fractures and shear zones. 3. Dipole-dipole resistivity distributions for the deep-seated(less than 500m in depth) fractures and shear zones. The dipole-dipole resistivity field data were inverted to the true resistivity distribution with two-dimensional automatic inversion program based on the finite-difference method. 4. CSAMT provides an efficient way of delineating fractures and fault zones if the depth is greater than about 500m.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.6 no.8
• /
• pp.1894-1912
• /
• 2012

This paper proposes a system called Wireless Link based on Global Communication Channel (WLGCC) to enhance the spectrum sharing between digital broadcasting (DB) services and the cognitive radio (CR) system in the licensed band of 470-790 MHz. The WLGCC aims to enhance the spectrum sensing and geolocation database (GLD) spectrum sharing methods in the CR system. Spectrum sensing can be enhanced by receiving the status of the used frequencies from the WLGCC, thereby eliminating the need for a low detection threshold (i.e., avoiding the hidden node problem). In addition, the GLD can be enhanced by providing a reliable communication link between the database and the CR device in the form of an unused TV white space that is reserved as the proposed Global Communication Channel (GCC). This paper analyzes the coexistence of the new WLGCC system and the DB service in terms of avoiding additional interference. Specifically, we mathematically determine the WLGCC parameters, such as the in-band and out-of-band power levels, and operation coverage, and verify them using Monte Carlo simulation. The results show that WLGCC does not degrade the existing DB service and reliably transmits information of the vacant (or used) frequency bands to the CR.

• Journal of The Korean Society of Integrative Medicine
• /
• v.1 no.1
• /
• pp.1-9
• /
• 2013

Purpose : The purpose of this study is to investigate the impact on the ability to walk, balance after side walking training of hemiplegic patients caused by stroke. Method : The subjects were training before stroke onset whether more than one year elapsed 15 patients with chronic stroke patients, and Berg balance scale(BBS) and Timed up and go test(TUG), Functional reaching test(FRT), 20m walking time 200m walking time were measured and recorded. Training period, a total of three weeks, and training frequency circuit training times 10 minutes per training, 5-minute break, the 10-minute training total 25-minute training was conducted. Gait line of 3m to be based on the patient's side walking, and the risk of falling compared to the presence of the experimenter trained under was carried out. Result : 1. TUG, 2. 20m walking time, 3. 200m walking time 4. FRT, 5. All showed significant improvement in BBS. Judging from the results, the side walking training conducted three weeks due to chronic stroke hemiplegic patient's ability to balance and showed a positive effect on the improvement of walking ability. Conclusion : Accordingly, it was more effective to train hemiplegic patients with chronic stroke on side walking.

• Journal of the Korean Society for Library and Information Science
• /
• v.42 no.2
• /
• pp.371-392
• /
• 2008

The books and circulation-related data in the Online Public Access Catalog System of the H-Public library were collected and analyzed in this paper. The methods which may be applied to the Customer Relationship Management in a public library based on the results were also suggested here. Collected data were 57,927 bibliographic data of books, 11,871 patron data and 27,145 circulation records. The type of collections. circulation frequencies, total number of circulated books, publication year, and use factor as relation factor from the analyzed data of circulation records were extracted. They were also analyzed, and verified by various statistical methods such as correlation coefficient, non-parametric method, etc.

• Journal of Korea Society of Industrial Information Systems
• /
• v.11 no.4
• /
• pp.112-120
• /
• 2006

Multicarrier code division multiple access(MC-CDMA) system that combines multicarrier modulation with CDMA offers robustness to frequency selective fading and can support higher rate data transmission with higher spectral efficiency. A new asynchronous MC-CDMA system to implement multiple data rate communications is proposed in this paper. In a W-CDMA downlink the orthogonal variable spreading factor(OVSF) code is used for variable spreading factor for various multimedia traffic. Proposed system utilizes the OVSF code that generated by generation property for spreading. The proposed MC-CDMA system use different lengths of OVSF code as a spreading code according to their data rate. The groupwise processing is accomplished by code grouping in OVSF code generation tree. For the analysis of average BER performance, numerical method and computer simulation were used. We also compare the system performance with that of a single rate MC-CDMA system used orthogonal code as a spreading code.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.2
• /
• pp.274-279
• /
• 2009

H.264 suggests applying a 2-D 6-tap wiener filter to realize the interpolation for half-pixel positions, followed by a bilinear interpolation to get the data of quarter-pixels precision. This method is comparatively simpler; however, it only considers the affection of 4-connection neighborhood ignoring the influence that comes from the changing rate between respective neighborhoods. As a result, it has the characteristics of a Low-pass filter under the risk of losing high-frequency weights. The Cubic interpolation uses the gray-values within the larger regions of points to be sampled for interpolation. Nevertheless, the cubic interpolation is more complicated and computational. We give a deep analysis on the features while applying both bilinear and cubic interpolation in H.264 presenting a proper selection of interpolation algorithm with respect to specific distribution of gray-value in a certain grand block. The experiments point out that load far motion searching and interpolation are reduced when promoting the precision of interpolation simultaneously.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.24 no.2
• /
• pp.180-185
• /
• 2004

Conventional ultrasonic examination to detect micro and small surface cracks is based on the pulse-echo technique using a normal immersion focused transducer with high frequency, or an angle-beam transducer generating surface waves. It is difficult to make an automatic ultrasonic system that can detect micro and small surface cracks and position in a large structure like steel and ceramic rolls, because of the huge data of inspection and the ambiguous position data of the transducer. In this study, a high-precision scanning acoustic microscope with a 10MHz large-aperture transducer has been used to assess the existence, position and depth of a surface crack from the real-time A, B, C scans obtained by exploiting the ultrasonic diffraction. The ultrasonic method with large aperture transducer has improved the accuracy of the crack depth assessment and also the scanning speed by ten times, compared with the conventional ultrasonic methods.

• Korean Security Journal
• /
• no.41
• /
• pp.263-292
• /
• 2014

This study is an attempt to introduce an effective human resource management way by analyzing the relationship of personality type of Security Agents and coping strategy for job stress and the job satisfaction. To achieve this purpose, this study surveyed users of the Gyeonggi and Chungnam in based on cluster sampling method. A total of 283 samples were used for this study, except 17 erroneous samples dropped. For the data process of the questionnaire, each answer content was coded and an element analysis, credibility analysis, frequency analysis, co-relationship analysis and regression analysis were performed using the SPSS version 18.0 of Angel for Windows. Through the data analysis following the research methods above, the conclusion was acquired as follows: First, the nature of the security personnel Factors affecting job stress. Second, the nature of the security personnel Factors affect coping behavior.