• Journal of Broadcast Engineering
• /
• v.13 no.5
• /
• pp.744-751
• /
• 2008

In this paper, we investigate methods to enhance the perceptual quality of MP3-coded audios. Based on the high frequency reconstruction method by Liu, in the proposed method, we determine adaptively the starting point of high frequency reconstruction. We also present an improved linear estimation method. For high frequency component generation, we compare two methods. One is a replication of low-frequency components and the other is an insertion of additive white Gaussian noise signals. Through subjective tests, we shall show that the proposed method can improve the perceptual quality of MP3-coded audio.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.11C
• /
• pp.1111-1117
• /
• 2003

The maximum Doppler frequency, or equivalently, the mobile speed is very useful information to optimize the performance of many wireless communication systems. However, the performance of a maximum Doppler frequency estimator is limited since it requires an estimate of the signal-to-noise ratio (SNR) of the channel environment. In this paper, the improved method for the maximum Doppler frequency estimations based on the decision feedback Doppler adaptive band-limit (DF-DABL) method is proposed. To reduce the effect of additive noise, the proposed algorithm uses a novel Doppler adaptive band-limit (DABL) technique. The distortion due to the additive noise is drastically removed by the proposed DF-DABL method. Especially, the DF-DABL method does not need any other channel information such as SNR.

• Journal of Biomedical Engineering Research
• /
• v.31 no.6
• /
• pp.417-426
• /
• 2010

We present a speech processing strategy incorporating instantaneous frequency (IF) encoding for the enhancement of melody recognition performance of cochlear implants. For the IF extraction from incoming sound, we propose the use of a Teager energy operator (TEO), which is advantageous for its lower computational load. From time-frequency analysis, we verified that the TEO-based method provides proper IF encoding of input sound, which is crucial for melody recognition. Similar benefit could be obtained also from the use of a Hilbert transform (HT), but much higher computational cost was required. The melody recognition performance of the proposed speech processing strategy was compared with those of a conventional strategy using envelope extraction, and the HT-based IF encoding. Hearing tests on normal subjects were performed using acoustic simulation and a musical contour identification task. Insignificant difference in melody recognition performance was observed between the TEO-based and HT-based IF encodings, and both were superior to the conventional strategy. However, the TEO-based strategy was advantageous considering that it was approximately 35% faster than the HT-based strategy.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.60 no.4
• /
• pp.227-235
• /
• 2011

This paper describes a PMSM control algorithm for realizing a low-cost motor drive system using a general purpose microcontroller. The proposed sensorless algorithm consists of the current observer and the sensorless scheme based on instantaneous reactive power. Also the control board system is not the high-cost DSP(digital signal processor) system but the general purpose microcontroller and it allows to reduce the unit cost of the motor system. However the clock frequency of the proposed microcontroller is one-fifths for the clock frequency of the DSP. In addition, the switching frequency must be selected as the lower frequency because of complex mathematic modeling of the sensorless algorithm. the low switching frequency augments the noise of the motor and might make accurate speed control impossible. Thus this paper proposes the optimization method to supplement the drawback of the general purpose microcontroller and the usefulness of the proposed method is verified through the experiment.

• Journal of the Korean Society of Safety
• /
• v.27 no.4
• /
• pp.33-37
• /
• 2012

This paper describes the characteristics for ground impedance of counterpoise according to position of auxiliary probe and frequency using the fall-of-potential method and the testing techniques to minimize the measuring errors are proposed. The fall-of-potential method is theoretically based on the potential and current measuring principle and the measuring error is primarily caused by the position of auxiliary probes. In order to analyze the effects of ground impedance due to the distance of the current probe and frequency, ground impedances were measured in case that the distance of current probe was located from 10[m] to 100[m] and the measuring frequency was ranged in 55 [Hz], 128[Hz], 342[Hz], and 513[Hz]. The results could be help to determine the position of auxiliary probe when the ground impedance was measured at grounding system.

• Proceedings of the IEEK Conference
• /
• summer
• /
• pp.233-236
• /
• 2004

This paper proposes new method for the enhancement of nonexistent high frequency spectral contents from low sample rate audio signal. For example, Due to the protocol constraint, the audio bandwidth of MP3 is restricted to 16Khz. Although band-restricted MP3 audio provide savings of storage space and network bandwidth, it suffers a major problem of a loss in high frequency fidelity such as localization, ambient information, and bright nature of audio. This paper provides a new mathematical analysis for the adaptive estimation of the high frequency contents based on the nature of the input low sample rate audio. Proposed method can be worked globally to any kind of audio such as speech and music that are restricted by sampling rate and bandwidth.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1997.10a
• /
• pp.402-407
• /
• 1997

For cylindrical shells, the closed-form solutions are limited only to the cases with special boundary and/or loading conditions. Though the finite element method is certainly a powerful solution approach for the general structural dynamics problems, it is known to provide reliable solutions only in the low frequency region due to the inherent high sensitivities of structural and numerical modeling errors. Instead, the spectral element method has been proved to provide extremely accurate dynamic responses even in the high frequency region. Since the wave characteristics of a cylindrical shell becomes identical to that of a flat plate as the frequency increases, an equivalent plate model (EPM) representing the high-frequency dynamic characteristics of a cylindrical shell is introduced herein. The EPM-based spectral element analysis solutions are compared with the known analytical solutions for the corresponding cylindrical shell to confirm the validity of the present modeling approach.

• Journal of Ocean Engineering and Technology
• /
• v.6 no.2
• /
• pp.125-132
• /
• 1992

This paper presents an approach for the derivation of frequency-dependent element matrices for vibration analysis of piping systems containing a moving medium. The dynamic stiffness matrix is deduced from transfer matrix, and, in turn, the frequency-dependent element matrices are derived. Numerical examples show that method gives more accurate results than those obtained using the conventional static shape function based element matrices.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.8C
• /
• pp.613-616
• /
• 2008

In this paper, a fine residual frequency offset estimation scheme is proposed for multiband orthogonal frequency division multiplexing ultra-wideband (MB-OFDM UWB) systems. The basic idea of our approach is based on the fact that two adjacent OFDM symbols carry the identical information in the MB-OFDM UWB system, thus removing the need of pilot symbols. The mean square error of the synchronization scheme is evaluated and simulation results are used to verify the effectiveness of the proposed estimator. When compared to the pilot-aided conventional estimator, the proposed estimator has a lower estimation error.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.12C
• /
• pp.1208-1215
• /
• 2009

In OFDM systems, mobile channel degrades the system performance seriously. Therefore, channel estimation technique is required to compensate for the degradation from the channel effects. However, conventional channel estimations in frequency domain induce ICI which is induced from Doppler frequency. In addition, a linear interpolation method causes inaccurate channel estimation. In order to minimize the effect of the interference and interpolation error, the proposed method combines LS method and Kalman filtering algorithm. Channel impulse response is adaptively tracked by Kalman filtering based on the information from LS estimator. Simulation results are presented to verify the performance of the proposed channel estimation over mobile channel environment. Simulation results show that the proposed method can effectively compensate for channel degradation.